提交 86387e1a 编写于 作者: J Jeff Kirsher

s2io/vxge: Move the Exar drivers

Move the Exar drivers into drivers/net/ethernet/neterion/ and make the
necessary Kconfig and Makefile changes.

CC: Jon Mason <jdmason@kudzu.us>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 93f7848b
......@@ -4380,9 +4380,8 @@ W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
S: Supported
F: Documentation/networking/s2io.txt
F: drivers/net/s2io*
F: Documentation/networking/vxge.txt
F: drivers/net/vxge/
F: drivers/net/ethernet/neterion/
NETFILTER/IPTABLES/IPCHAINS
P: Rusty Russell
......
......@@ -1485,40 +1485,6 @@ config ENIC
help
This enables the support for the Cisco VIC Ethernet card.
config S2IO
tristate "Exar Xframe 10Gb Ethernet Adapter"
depends on PCI
---help---
This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
More specific information on configuring the driver is in
<file:Documentation/networking/s2io.txt>.
To compile this driver as a module, choose M here. The module
will be called s2io.
config VXGE
tristate "Exar X3100 Series 10GbE PCIe Server Adapter"
depends on PCI && INET
---help---
This driver supports Exar Corp's X3100 Series 10 GbE PCIe
I/O Virtualized Server Adapter.
More specific information on configuring the driver is in
<file:Documentation/networking/vxge.txt>.
To compile this driver as a module, choose M here. The module
will be called vxge.
config VXGE_DEBUG_TRACE_ALL
bool "Enabling All Debug trace statments in driver"
default n
depends on VXGE
---help---
Say Y here if you want to enabling all the debug trace statements in
the vxge driver. By default only few debug trace statements are
enabled.
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
depends on PPC_PASEMI && PCI && INET
......
......@@ -149,8 +149,6 @@ obj-$(CONFIG_NET_NETX) += netx-eth.o
obj-$(CONFIG_DL2K) += dl2k.o
obj-$(CONFIG_R8169) += r8169.o
obj-$(CONFIG_IBMVETH) += ibmveth.o
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_VXGE) += vxge/
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
......
......@@ -18,6 +18,7 @@ source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
......
......@@ -9,6 +9,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
......
#
# Exar device configuration
#
config NET_VENDOR_EXAR
bool "Exar devices"
depends on PCI
---help---
If you have a network (Ethernet) card belonging to this class, say
Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Exar cards. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_EXAR
config S2IO
tristate "Exar Xframe 10Gb Ethernet Adapter"
depends on PCI
---help---
This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
More specific information on configuring the driver is in
<file:Documentation/networking/s2io.txt>.
To compile this driver as a module, choose M here. The module
will be called s2io.
config VXGE
tristate "Exar X3100 Series 10GbE PCIe Server Adapter"
depends on PCI && INET
---help---
This driver supports Exar Corp's X3100 Series 10 GbE PCIe
I/O Virtualized Server Adapter.
More specific information on configuring the driver is in
<file:Documentation/networking/vxge.txt>.
To compile this driver as a module, choose M here. The module
will be called vxge.
config VXGE_DEBUG_TRACE_ALL
bool "Enabling All Debug trace statements in driver"
default n
depends on VXGE
---help---
Say Y here if you want to enabling all the debug trace statements in
the vxge driver. By default only few debug trace statements are
enabled.
endif # NET_VENDOR_EXAR
#
# Makefile for the Exar network device drivers.
#
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_VXGE) += vxge/
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册