提交 85d05fb3 编写于 作者: J Jarkko Nikula 提交者: Tony Lindgren

ARM: OMAP: Add helper module for board specific I2C bus registration

This helper module simplifies I2C bus registration for different OMAP
platforms by doing registration in one place only and to allow board
specific bus configuration like clock rate and number of busses configured.

Helper should cover OMAP processors from first to third generation.

This patch just adds the feature and current implementation cleanup and
board file modifications will be done in following patches.
Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 ce2df9ca
...@@ -19,3 +19,4 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o ...@@ -19,3 +19,4 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
obj-$(CONFIG_I2C_OMAP) += i2c.o
/*
* linux/arch/arm/plat-omap/i2c.c
*
* Helper module for board specific I2C bus registration
*
* Copyright (C) 2007 Nokia Corporation.
*
* Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/arch/mux.h>
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
#define OMAP2_I2C_BASE1 0x48070000
#define OMAP2_I2C_BASE2 0x48072000
#define OMAP2_I2C_BASE3 0x48060000
static const char name[] = "i2c_omap";
#define I2C_RESOURCE_BUILDER(base, irq) \
{ \
.start = (base), \
.end = (base) + OMAP_I2C_SIZE, \
.flags = IORESOURCE_MEM, \
}, \
{ \
.start = (irq), \
.flags = IORESOURCE_IRQ, \
},
static struct resource i2c_resources[][2] = {
{ I2C_RESOURCE_BUILDER(0, 0) },
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
#endif
#if defined(CONFIG_ARCH_OMAP34XX)
{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
#endif
};
#define I2C_DEV_BUILDER(bus_id, res, data) \
{ \
.id = (bus_id), \
.name = name, \
.num_resources = ARRAY_SIZE(res), \
.resource = (res), \
.dev = { \
.platform_data = (data), \
}, \
}
static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
static struct platform_device omap_i2c_devices[] = {
I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
#endif
#if defined(CONFIG_ARCH_OMAP34XX)
I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]),
#endif
};
static void __init omap_i2c_mux_pins(int bus_id)
{
/* TODO: Muxing for OMAP3 */
switch (bus_id) {
case 1:
if (cpu_class_is_omap1()) {
omap_cfg_reg(I2C_SCL);
omap_cfg_reg(I2C_SDA);
} else if (cpu_is_omap24xx()) {
omap_cfg_reg(M19_24XX_I2C1_SCL);
omap_cfg_reg(L15_24XX_I2C1_SDA);
}
break;
case 2:
if (cpu_is_omap24xx()) {
omap_cfg_reg(J15_24XX_I2C2_SCL);
omap_cfg_reg(H19_24XX_I2C2_SDA);
}
break;
}
}
int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
unsigned len)
{
int ports, err;
struct platform_device *pdev;
struct resource *res;
resource_size_t base, irq;
if (cpu_class_is_omap1())
ports = 1;
else if (cpu_is_omap24xx())
ports = 2;
else if (cpu_is_omap34xx())
ports = 3;
BUG_ON(bus_id < 1 || bus_id > ports);
if (info) {
err = i2c_register_board_info(bus_id, info, len);
if (err)
return err;
}
pdev = &omap_i2c_devices[bus_id - 1];
*(u32 *)pdev->dev.platform_data = clkrate;
if (bus_id == 1) {
res = pdev->resource;
if (cpu_class_is_omap1()) {
base = OMAP1_I2C_BASE;
irq = INT_I2C;
} else {
base = OMAP2_I2C_BASE1;
irq = INT_24XX_I2C1_IRQ;
}
res[0].start = base;
res[0].end = base + OMAP_I2C_SIZE;
res[1].start = irq;
}
omap_i2c_mux_pins(bus_id);
return platform_device_register(pdev);
}
...@@ -27,10 +27,21 @@ ...@@ -27,10 +27,21 @@
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H
#ifdef CONFIG_I2C_OMAP
#include <linux/i2c.h>
#endif
struct sys_timer; struct sys_timer;
extern void omap_map_common_io(void); extern void omap_map_common_io(void);
extern struct sys_timer omap_timer; extern struct sys_timer omap_timer;
extern void omap_serial_init(void); extern void omap_serial_init(void);
#ifdef CONFIG_I2C_OMAP
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
unsigned len);
#else
#define omap_register_i2c_bus(a, b, c, d) 0
#endif
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
...@@ -263,6 +263,8 @@ ...@@ -263,6 +263,8 @@
#define INT_24XX_GPTIMER10 46 #define INT_24XX_GPTIMER10 46
#define INT_24XX_GPTIMER11 47 #define INT_24XX_GPTIMER11 47
#define INT_24XX_GPTIMER12 48 #define INT_24XX_GPTIMER12 48
#define INT_24XX_I2C1_IRQ 56
#define INT_24XX_I2C2_IRQ 57
#define INT_24XX_MCBSP1_IRQ_TX 59 #define INT_24XX_MCBSP1_IRQ_TX 59
#define INT_24XX_MCBSP1_IRQ_RX 60 #define INT_24XX_MCBSP1_IRQ_RX 60
#define INT_24XX_MCBSP2_IRQ_TX 62 #define INT_24XX_MCBSP2_IRQ_TX 62
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册