DA850: move MII/RMII pin lists to the board file

The CPGMAC pin list in da850.c was incorrectly split into two MII/RMII mode
specific pin lists, while what pin group is used is a function of how the board
is wired.  Copy the pin lists to board-da850-evm.c, renaming them accordingly,
and merge the two lists in da850.c into one, da850_cpgmac_pins[], representing
the CPGMAC module as a whole...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Tested-by: NBen Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

arch/arm/mach-davinci/board-da850-evm.c

@@ -600,6 +600,23 @@ static const short da850_evm_lcdc_pins[] = {
 	-1
 };
 
+static const short da850_evm_mii_pins[] = {
+	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
+	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
+	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
+	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	-1
+};
+
+static const short da850_evm_rmii_pins[] = {
+	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
+	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	-1
+};
+
 static int __init da850_evm_config_emac(void)
 {
 	void __iomem *cfg_chip3_base;
@@ -617,12 +634,12 @@ static int __init da850_evm_config_emac(void)
 
 	if (rmii_en) {
 		val |= BIT(8);
-		ret = davinci_cfg_reg_list(da850_rmii_pins);
+		ret = davinci_cfg_reg_list(da850_evm_rmii_pins);
 		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
 							" functional\n");
 	} else {
 		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(da850_cpgmac_pins);
+		ret = davinci_cfg_reg_list(da850_evm_mii_pins);
 		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
 							" functional\n");
 	}

arch/arm/mach-davinci/da850.c

@@ -574,15 +574,9 @@ const short da850_cpgmac_pins[] __initdata = {
 	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
 	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
 	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-const short da850_rmii_pins[] __initdata = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
+	DA850_MDIO_D, DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, DA850_RMII_RXER,
+	DA850_RMII_MHZ_50_CLK,
 	-1
 };
 

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -121,7 +121,6 @@ extern const short da850_uart2_pins[];
 extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
 extern const short da850_cpgmac_pins[];
-extern const short da850_rmii_pins[];
 extern const short da850_mcasp_pins[];
 extern const short da850_lcdcntl_pins[];
 extern const short da850_mmcsd0_pins[];