drm/i915: Improve DP downstream HPD handling

DP dongles may signal downstream HPD via short HPD pulses. Setting the
sink to DPMS off apparently kills the downstream HPD (at least on my
DP->VGA dongle), so skip the DPMS off for such dongles when we turn
off the port.

v2: Deal with DDI as well by moving the check into
    intel_dp_sink_dpms() (Dhinakaran)

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Pablo <pablodebiase@nanalysis.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027094523.9317-1-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

drivers/gpu/drm/i915/intel_dp.c

@@ -2505,6 +2505,21 @@ static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
 	udelay(200);
 }
 
+static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp)
+{
+	/*
+	 * DPCD 1.2+ should support BRANCH_DEVICE_CTRL, and thus
+	 * be capable of signalling downstream hpd with a long pulse.
+	 * Whether or not that means D3 is safe to use is not clear,
+	 * but let's assume so until proven otherwise.
+	 *
+	 * FIXME should really check all downstream ports...
+	 */
+	return intel_dp->dpcd[DP_DPCD_REV] == 0x11 &&
+		intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT &&
+		intel_dp->downstream_ports[0] & DP_DS_PORT_HPD;
+}
+
 /* If the sink supports it, try to set the power state appropriately */
 void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 {
@@ -2515,6 +2530,9 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 		return;
 
 	if (mode != DRM_MODE_DPMS_ON) {
+		if (downstream_hpd_needs_d0(intel_dp))
+			return;
+
 		ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
 					 DP_SET_POWER_D3);
 	} else {