提交 85443319 编写于 作者: B Brian Norris 提交者: David Woodhouse

mtd: nand: differentiate 1- vs. 2-byte writes when marking bad blocks

It seems that we have developed a bad-block-marking "feature" out of
pure laziness:

  "We write two bytes per location, so we dont have to mess with 16 bit
  access."

It's relatively simple to write a 1 byte at a time on x8 devices and 2
bytes at a time on x16 devices, so let's do it.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
上级 cdbec050
......@@ -430,13 +430,17 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
/*
* Write to first two pages if necessary. If we write to more
* than one location, the first error encountered quits the
* procedure. We write two bytes per location, so we dont have
* to mess with 16 bit access.
* procedure.
*/
ops.len = ops.ooblen = 2;
ops.datbuf = NULL;
ops.oobbuf = buf;
ops.ooboffs = chip->badblockpos & ~0x01;
ops.ooboffs = chip->badblockpos;
if (chip->options & NAND_BUSWIDTH_16) {
ops.ooboffs &= ~0x01;
ops.len = ops.ooblen = 2;
} else {
ops.len = ops.ooblen = 1;
}
ops.mode = MTD_OPS_PLACE_OOB;
do {
ret = nand_do_write_oob(mtd, ofs, &ops);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册