提交 84efbad4 编写于 作者: P Ping-Ke Shih 提交者: Kalle Valo

rtlwifi: Add module parameter ASPM

On some platforms, enable ASPM will cause AER error to be logged, thus
we use a parameter to selectively turn on ASPM.
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
上级 1d22b177
......@@ -41,6 +41,7 @@
static void rtl88e_init_aspm_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
/*close ASPM for AMD defaultly */
......@@ -77,7 +78,7 @@ static void rtl88e_init_aspm_vars(struct ieee80211_hw *hw)
* 1 - Support ASPM,
* 2 - According to chipset.
*/
rtlpci->const_support_pciaspm = 1;
rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
}
int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
......@@ -276,6 +277,7 @@ static struct rtl_mod_params rtl88ee_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = false,
.msi_support = true,
.aspm_support = 1,
.debug_level = 0,
.debug_mask = 0,
};
......@@ -399,6 +401,7 @@ module_param_named(ips, rtl88ee_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl88ee_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl88ee_mod_params.fwctrl_lps, bool, 0444);
module_param_named(msi, rtl88ee_mod_params.msi_support, bool, 0444);
module_param_named(aspm, rtl88ee_mod_params.aspm_support, int, 0444);
module_param_named(disable_watchdog, rtl88ee_mod_params.disable_watchdog,
bool, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
......@@ -406,6 +409,7 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
......
......@@ -44,6 +44,7 @@
static void rtl92c_init_aspm_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
/*close ASPM for AMD defaultly */
......@@ -83,7 +84,7 @@ static void rtl92c_init_aspm_vars(struct ieee80211_hw *hw)
* 1 - Support ASPM,
* 2 - According to chipset.
*/
rtlpci->const_support_pciaspm = 1;
rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
}
int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
......@@ -252,6 +253,7 @@ static struct rtl_mod_params rtl92ce_mod_params = {
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
.aspm_support = 1,
.debug_level = 0,
.debug_mask = 0,
};
......@@ -375,10 +377,12 @@ module_param_named(debug_mask, rtl92ce_mod_params.debug_mask, ullong, 0644);
module_param_named(ips, rtl92ce_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl92ce_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl92ce_mod_params.fwctrl_lps, bool, 0444);
module_param_named(aspm, rtl92ce_mod_params.aspm_support, int, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
......
......@@ -40,6 +40,7 @@
static void rtl92d_init_aspm_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
/*close ASPM for AMD defaultly */
......@@ -79,7 +80,7 @@ static void rtl92d_init_aspm_vars(struct ieee80211_hw *hw)
* 1 - Support ASPM,
* 2 - According to chipset.
*/
rtlpci->const_support_pciaspm = 1;
rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
}
static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
......@@ -254,6 +255,7 @@ static struct rtl_mod_params rtl92de_mod_params = {
.inactiveps = true,
.swctrl_lps = true,
.fwctrl_lps = false,
.aspm_support = 1,
.debug_level = 0,
.debug_mask = 0,
};
......@@ -369,11 +371,13 @@ module_param_named(debug_level, rtl92de_mod_params.debug_level, int, 0644);
module_param_named(ips, rtl92de_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl92de_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl92de_mod_params.fwctrl_lps, bool, 0444);
module_param_named(aspm, rtl92de_mod_params.aspm_support, int, 0444);
module_param_named(debug_mask, rtl92de_mod_params.debug_mask, ullong, 0644);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 1)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 0)\n");
MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
......
......@@ -44,6 +44,7 @@
static void rtl92ee_init_aspm_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
/*close ASPM for AMD defaultly */
......@@ -83,7 +84,7 @@ static void rtl92ee_init_aspm_vars(struct ieee80211_hw *hw)
* 1 - Support ASPM,
* 2 - According to chipset.
*/
rtlpci->const_support_pciaspm = 1;
rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
}
int rtl92ee_init_sw_vars(struct ieee80211_hw *hw)
......@@ -260,6 +261,7 @@ static struct rtl_mod_params rtl92ee_mod_params = {
.fwctrl_lps = true,
.msi_support = true,
.dma64 = false,
.aspm_support = 1,
.debug_level = 0,
.debug_mask = 0,
};
......@@ -378,6 +380,7 @@ module_param_named(swlps, rtl92ee_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl92ee_mod_params.fwctrl_lps, bool, 0444);
module_param_named(msi, rtl92ee_mod_params.msi_support, bool, 0444);
module_param_named(dma64, rtl92ee_mod_params.dma64, bool, 0444);
module_param_named(aspm, rtl92ee_mod_params.aspm_support, int, 0444);
module_param_named(disable_watchdog, rtl92ee_mod_params.disable_watchdog,
bool, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
......@@ -386,6 +389,7 @@ MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
MODULE_PARM_DESC(dma64, "Set to 1 to use DMA 64 (default 0)\n");
MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
......
......@@ -41,6 +41,7 @@
static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
/*close ASPM for AMD defaultly */
......@@ -77,7 +78,7 @@ static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
* 1 - Support ASPM,
* 2 - According to chipset.
*/
rtlpci->const_support_pciaspm = 2;
rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
}
static void rtl92se_fw_cb(const struct firmware *firmware, void *context)
......@@ -297,6 +298,7 @@ static struct rtl_mod_params rtl92se_mod_params = {
.inactiveps = true,
.swctrl_lps = true,
.fwctrl_lps = false,
.aspm_support = 2,
.debug_level = 0,
.debug_mask = 0,
};
......@@ -422,10 +424,12 @@ module_param_named(debug_mask, rtl92se_mod_params.debug_mask, ullong, 0644);
module_param_named(ips, rtl92se_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl92se_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl92se_mod_params.fwctrl_lps, bool, 0444);
module_param_named(aspm, rtl92se_mod_params.aspm_support, int, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 1)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 0)\n");
MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
......
......@@ -46,6 +46,7 @@
static void rtl8723e_init_aspm_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
/*close ASPM for AMD defaultly */
......@@ -85,7 +86,7 @@ static void rtl8723e_init_aspm_vars(struct ieee80211_hw *hw)
* 1 - Support ASPM,
* 2 - According to chipset.
*/
rtlpci->const_support_pciaspm = 1;
rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
}
int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
......@@ -268,6 +269,7 @@ static struct rtl_mod_params rtl8723e_mod_params = {
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
.aspm_support = 1,
.debug_level = 0,
.debug_mask = 0,
.msi_support = false,
......@@ -389,6 +391,7 @@ module_param_named(ips, rtl8723e_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl8723e_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl8723e_mod_params.fwctrl_lps, bool, 0444);
module_param_named(msi, rtl8723e_mod_params.msi_support, bool, 0444);
module_param_named(aspm, rtl8723e_mod_params.aspm_support, int, 0444);
module_param_named(disable_watchdog, rtl8723e_mod_params.disable_watchdog,
bool, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
......@@ -396,6 +399,7 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
......
......@@ -46,6 +46,7 @@
static void rtl8723be_init_aspm_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
/*close ASPM for AMD defaultly */
......@@ -82,7 +83,7 @@ static void rtl8723be_init_aspm_vars(struct ieee80211_hw *hw)
* 1 - Support ASPM,
* 2 - According to chipset.
*/
rtlpci->const_support_pciaspm = 1;
rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
}
int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
......@@ -271,6 +272,7 @@ static struct rtl_mod_params rtl8723be_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = true,
.msi_support = false,
.aspm_support = 1,
.disable_watchdog = false,
.debug_level = 0,
.debug_mask = 0,
......@@ -396,6 +398,7 @@ module_param_named(ips, rtl8723be_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl8723be_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl8723be_mod_params.fwctrl_lps, bool, 0444);
module_param_named(msi, rtl8723be_mod_params.msi_support, bool, 0444);
module_param_named(aspm, rtl8723be_mod_params.aspm_support, int, 0444);
module_param_named(disable_watchdog, rtl8723be_mod_params.disable_watchdog,
bool, 0444);
module_param_named(ant_sel, rtl8723be_mod_params.ant_sel, int, 0444);
......@@ -404,6 +407,7 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
MODULE_PARM_DESC(disable_watchdog,
......
......@@ -43,6 +43,7 @@
static void rtl8821ae_init_aspm_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
/*close ASPM for AMD defaultly */
......@@ -82,7 +83,7 @@ static void rtl8821ae_init_aspm_vars(struct ieee80211_hw *hw)
* 1 - Support ASPM,
* 2 - According to chipset.
*/
rtlpci->const_support_pciaspm = 1;
rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
}
/*InitializeVariables8812E*/
......@@ -313,6 +314,7 @@ static struct rtl_mod_params rtl8821ae_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = true,
.msi_support = true,
.aspm_support = 1,
.int_clear = true,
.debug_level = 0,
.debug_mask = 0,
......@@ -444,6 +446,7 @@ module_param_named(ips, rtl8821ae_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl8821ae_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl8821ae_mod_params.fwctrl_lps, bool, 0444);
module_param_named(msi, rtl8821ae_mod_params.msi_support, bool, 0444);
module_param_named(aspm, rtl8821ae_mod_params.aspm_support, int, 0444);
module_param_named(disable_watchdog, rtl8821ae_mod_params.disable_watchdog,
bool, 0444);
module_param_named(int_clear, rtl8821ae_mod_params.int_clear, bool, 0444);
......@@ -452,6 +455,7 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
......
......@@ -2262,6 +2262,9 @@ struct rtl_mod_params {
/* default: 0 = dma 32 */
bool dma64;
/* default: 1 = enable aspm */
int aspm_support;
/* default 0: 1 means disable */
bool disable_watchdog;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册