提交 84dda3c6 编写于 作者: P Phoebe Buckheister 提交者: David S. Miller

ieee802154: add support for listen-before-talk in wpan_phy

Listen-before-talk is an alternative to CSMA in uncoordinated networks
and prescribed by european regulations if one wants to have a device
with radio duty cycles above 10% (or less in some bands). Add a phy
property to enable/disable LBT in the phy, including support in the
at86rf230 driver for RF212 chips.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 643e53c2
...@@ -152,7 +152,7 @@ static inline int is_rf212(struct at86rf230_local *local) ...@@ -152,7 +152,7 @@ static inline int is_rf212(struct at86rf230_local *local)
#define SR_RESERVED_17_5 0x17, 0x08, 3 #define SR_RESERVED_17_5 0x17, 0x08, 3
#define SR_AACK_UPLD_RES_FT 0x17, 0x10, 4 #define SR_AACK_UPLD_RES_FT 0x17, 0x10, 4
#define SR_AACK_FLTR_RES_FT 0x17, 0x20, 5 #define SR_AACK_FLTR_RES_FT 0x17, 0x20, 5
#define SR_RESERVED_17_2 0x17, 0x40, 6 #define SR_CSMA_LBT_MODE 0x17, 0x40, 6
#define SR_RESERVED_17_1 0x17, 0x80, 7 #define SR_RESERVED_17_1 0x17, 0x80, 7
#define RG_FTN_CTRL (0x18) #define RG_FTN_CTRL (0x18)
#define SR_RESERVED_18_2 0x18, 0x7f, 0 #define SR_RESERVED_18_2 0x18, 0x7f, 0
...@@ -786,6 +786,14 @@ at86rf212_set_txpower(struct ieee802154_dev *dev, int db) ...@@ -786,6 +786,14 @@ at86rf212_set_txpower(struct ieee802154_dev *dev, int db)
return 0; return 0;
} }
static int
at86rf212_set_lbt(struct ieee802154_dev *dev, bool on)
{
struct at86rf230_local *lp = dev->priv;
return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
}
static struct ieee802154_ops at86rf230_ops = { static struct ieee802154_ops at86rf230_ops = {
.owner = THIS_MODULE, .owner = THIS_MODULE,
.xmit = at86rf230_xmit, .xmit = at86rf230_xmit,
...@@ -805,6 +813,7 @@ static struct ieee802154_ops at86rf212_ops = { ...@@ -805,6 +813,7 @@ static struct ieee802154_ops at86rf212_ops = {
.stop = at86rf230_stop, .stop = at86rf230_stop,
.set_hw_addr_filt = at86rf230_set_hw_addr_filt, .set_hw_addr_filt = at86rf230_set_hw_addr_filt,
.set_txpower = at86rf212_set_txpower, .set_txpower = at86rf212_set_txpower,
.set_lbt = at86rf212_set_lbt,
}; };
static void at86rf230_irqwork(struct work_struct *work) static void at86rf230_irqwork(struct work_struct *work)
......
...@@ -71,6 +71,7 @@ enum { ...@@ -71,6 +71,7 @@ enum {
IEEE802154_ATTR_DEV_TYPE, IEEE802154_ATTR_DEV_TYPE,
IEEE802154_ATTR_TXPOWER, IEEE802154_ATTR_TXPOWER,
IEEE802154_ATTR_LBT_ENABLED,
__IEEE802154_ATTR_MAX, __IEEE802154_ATTR_MAX,
}; };
......
...@@ -117,6 +117,11 @@ struct ieee802154_dev { ...@@ -117,6 +117,11 @@ struct ieee802154_dev {
* set_txpower: * set_txpower:
* Set radio transmit power in dB. Called with pib_lock held. * Set radio transmit power in dB. Called with pib_lock held.
* Returns either zero, or negative errno. * Returns either zero, or negative errno.
*
* set_lbt
* Enables or disables listen before talk on the device. Called with
* pib_lock held.
* Returns either zero, or negative errno.
*/ */
struct ieee802154_ops { struct ieee802154_ops {
struct module *owner; struct module *owner;
...@@ -134,6 +139,7 @@ struct ieee802154_ops { ...@@ -134,6 +139,7 @@ struct ieee802154_ops {
int (*ieee_addr)(struct ieee802154_dev *dev, int (*ieee_addr)(struct ieee802154_dev *dev,
u8 addr[IEEE802154_ADDR_LEN]); u8 addr[IEEE802154_ADDR_LEN]);
int (*set_txpower)(struct ieee802154_dev *dev, int db); int (*set_txpower)(struct ieee802154_dev *dev, int db);
int (*set_lbt)(struct ieee802154_dev *dev, bool on);
}; };
/* Basic interface to register ieee802154 device */ /* Basic interface to register ieee802154 device */
......
...@@ -47,6 +47,8 @@ struct wpan_phy { ...@@ -47,6 +47,8 @@ struct wpan_phy {
s8 transmit_power; s8 transmit_power;
u8 cca_mode; u8 cca_mode;
bool lbt;
struct device dev; struct device dev;
int idx; int idx;
...@@ -55,6 +57,7 @@ struct wpan_phy { ...@@ -55,6 +57,7 @@ struct wpan_phy {
void (*del_iface)(struct wpan_phy *phy, struct net_device *dev); void (*del_iface)(struct wpan_phy *phy, struct net_device *dev);
int (*set_txpower)(struct wpan_phy *phy, int db); int (*set_txpower)(struct wpan_phy *phy, int db);
int (*set_lbt)(struct wpan_phy *phy, bool on);
char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
}; };
......
...@@ -56,7 +56,8 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 portid, ...@@ -56,7 +56,8 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 portid,
if (nla_put_string(msg, IEEE802154_ATTR_PHY_NAME, wpan_phy_name(phy)) || if (nla_put_string(msg, IEEE802154_ATTR_PHY_NAME, wpan_phy_name(phy)) ||
nla_put_u8(msg, IEEE802154_ATTR_PAGE, phy->current_page) || nla_put_u8(msg, IEEE802154_ATTR_PAGE, phy->current_page) ||
nla_put_u8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel) || nla_put_u8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel) ||
nla_put_s8(msg, IEEE802154_ATTR_TXPOWER, phy->transmit_power)) nla_put_s8(msg, IEEE802154_ATTR_TXPOWER, phy->transmit_power) ||
nla_put_u8(msg, IEEE802154_ATTR_LBT_ENABLED, phy->lbt))
goto nla_put_failure; goto nla_put_failure;
for (i = 0; i < 32; i++) { for (i = 0; i < 32; i++) {
if (phy->channels_supported[i]) if (phy->channels_supported[i])
...@@ -356,40 +357,71 @@ int ieee802154_del_iface(struct sk_buff *skb, struct genl_info *info) ...@@ -356,40 +357,71 @@ int ieee802154_del_iface(struct sk_buff *skb, struct genl_info *info)
return rc; return rc;
} }
static int phy_set_txpower(struct wpan_phy *phy, struct genl_info *info)
{
int txpower = nla_get_s8(info->attrs[IEEE802154_ATTR_TXPOWER]);
int rc;
rc = phy->set_txpower(phy, txpower);
if (rc < 0)
return rc;
phy->transmit_power = txpower;
return 0;
}
static int phy_set_lbt(struct wpan_phy *phy, struct genl_info *info)
{
u8 on = !!nla_get_u8(info->attrs[IEEE802154_ATTR_LBT_ENABLED]);
int rc;
rc = phy->set_lbt(phy, on);
if (rc < 0)
return rc;
phy->lbt = on;
return 0;
}
int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info) int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
{ {
struct wpan_phy *phy; struct wpan_phy *phy;
const char *name; const char *name;
int txpower; int rc = -ENOTSUPP;
int rc = -EINVAL;
pr_debug("%s\n", __func__); pr_debug("%s\n", __func__);
if (!info->attrs[IEEE802154_ATTR_PHY_NAME]) if (!info->attrs[IEEE802154_ATTR_PHY_NAME] &&
!info->attrs[IEEE802154_ATTR_LBT_ENABLED])
return -EINVAL; return -EINVAL;
name = nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]); name = nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]);
if (name[nla_len(info->attrs[IEEE802154_ATTR_PHY_NAME]) - 1] != '\0') if (name[nla_len(info->attrs[IEEE802154_ATTR_PHY_NAME]) - 1] != '\0')
return -EINVAL; /* phy name should be null-terminated */ return -EINVAL; /* phy name should be null-terminated */
txpower = nla_get_s8(info->attrs[IEEE802154_ATTR_TXPOWER]);
phy = wpan_phy_find(name); phy = wpan_phy_find(name);
if (!phy) if (!phy)
return -ENODEV; return -ENODEV;
if (!phy->set_txpower) if ((!phy->set_txpower && info->attrs[IEEE802154_ATTR_TXPOWER]) ||
(!phy->set_lbt && info->attrs[IEEE802154_ATTR_LBT_ENABLED]))
goto out; goto out;
mutex_lock(&phy->pib_lock); mutex_lock(&phy->pib_lock);
rc = phy->set_txpower(phy, txpower); if (info->attrs[IEEE802154_ATTR_TXPOWER]) {
if (rc < 0) { rc = phy_set_txpower(phy, info);
mutex_unlock(&phy->pib_lock); if (rc < 0)
goto out; goto error;
} }
phy->transmit_power = txpower; if (info->attrs[IEEE802154_ATTR_LBT_ENABLED]) {
rc = phy_set_lbt(phy, info);
if (rc < 0)
goto error;
}
mutex_unlock(&phy->pib_lock); mutex_unlock(&phy->pib_lock);
...@@ -397,6 +429,8 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info) ...@@ -397,6 +429,8 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
return 0; return 0;
error:
mutex_unlock(&phy->pib_lock);
out: out:
wpan_phy_put(phy); wpan_phy_put(phy);
return rc; return rc;
......
...@@ -54,5 +54,6 @@ const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = { ...@@ -54,5 +54,6 @@ const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
[IEEE802154_ATTR_CHANNEL_PAGE_LIST] = { .len = 32 * 4, }, [IEEE802154_ATTR_CHANNEL_PAGE_LIST] = { .len = 32 * 4, },
[IEEE802154_ATTR_TXPOWER] = { .type = NLA_S8, }, [IEEE802154_ATTR_TXPOWER] = { .type = NLA_S8, },
[IEEE802154_ATTR_LBT_ENABLED] = { .type = NLA_U8, },
}; };
...@@ -175,6 +175,16 @@ static int mac802154_set_txpower(struct wpan_phy *phy, int db) ...@@ -175,6 +175,16 @@ static int mac802154_set_txpower(struct wpan_phy *phy, int db)
return priv->ops->set_txpower(&priv->hw, db); return priv->ops->set_txpower(&priv->hw, db);
} }
static int mac802154_set_lbt(struct wpan_phy *phy, bool on)
{
struct mac802154_priv *priv = wpan_phy_priv(phy);
if (!priv->ops->set_lbt)
return -ENOTSUPP;
return priv->ops->set_lbt(&priv->hw, on);
}
struct ieee802154_dev * struct ieee802154_dev *
ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops) ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops)
{ {
...@@ -253,6 +263,7 @@ int ieee802154_register_device(struct ieee802154_dev *dev) ...@@ -253,6 +263,7 @@ int ieee802154_register_device(struct ieee802154_dev *dev)
priv->phy->add_iface = mac802154_add_iface; priv->phy->add_iface = mac802154_add_iface;
priv->phy->del_iface = mac802154_del_iface; priv->phy->del_iface = mac802154_del_iface;
priv->phy->set_txpower = mac802154_set_txpower; priv->phy->set_txpower = mac802154_set_txpower;
priv->phy->set_lbt = mac802154_set_lbt;
rc = wpan_phy_register(priv->phy); rc = wpan_phy_register(priv->phy);
if (rc < 0) if (rc < 0)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册