提交 84a8c541 编写于 作者: S Sjoerd Simons 提交者: Michael Turquette

clk: rockchip: Allow the RK3288 SPDIF clocks to change their parent

The clock branches leading to sclk_spdif and sclk_spdif_8ch on RK3288
SoCs only feed those clocks, allow those clocks to change their parents
all the way up the hierarchy.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NMichael Turquette <mturquette@baylibre.com>
上级 66746420
......@@ -317,25 +317,25 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
MUX(0, "spdif_src", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(5), 15, 1, MFLAGS),
COMPOSITE_NOMUX(0, "spdif_pre", "spdif_src", 0,
COMPOSITE_NOMUX(0, "spdif_pre", "spdif_src", CLK_SET_RATE_PARENT,
RK3288_CLKSEL_CON(5), 0, 7, DFLAGS,
RK3288_CLKGATE_CON(4), 4, GFLAGS),
COMPOSITE_FRACMUX(0, "spdif_frac", "spdif_src", 0,
COMPOSITE_FRACMUX(0, "spdif_frac", "spdif_src", CLK_SET_RATE_PARENT,
RK3288_CLKSEL_CON(9), 0,
RK3288_CLKGATE_CON(4), 5, GFLAGS,
MUX(0, "spdif_mux", mux_spdif_p, 0,
MUX(0, "spdif_mux", mux_spdif_p, CLK_SET_RATE_PARENT,
RK3288_CLKSEL_CON(5), 8, 2, MFLAGS)),
GATE(SCLK_SPDIF, "sclk_spdif", "spdif_mux", 0,
GATE(SCLK_SPDIF, "sclk_spdif", "spdif_mux", CLK_SET_RATE_PARENT,
RK3288_CLKGATE_CON(4), 6, GFLAGS),
COMPOSITE_NOMUX(0, "spdif_8ch_pre", "spdif_src", 0,
COMPOSITE_NOMUX(0, "spdif_8ch_pre", "spdif_src", CLK_SET_RATE_PARENT,
RK3288_CLKSEL_CON(40), 0, 7, DFLAGS,
RK3288_CLKGATE_CON(4), 7, GFLAGS),
COMPOSITE_FRACMUX(0, "spdif_8ch_frac", "spdif_8ch_pre", 0,
COMPOSITE_FRACMUX(0, "spdif_8ch_frac", "spdif_8ch_pre", CLK_SET_RATE_PARENT,
RK3288_CLKSEL_CON(41), 0,
RK3288_CLKGATE_CON(4), 8, GFLAGS,
MUX(0, "spdif_8ch_mux", mux_spdif_8ch_p, 0,
MUX(0, "spdif_8ch_mux", mux_spdif_8ch_p, CLK_SET_RATE_PARENT,
RK3288_CLKSEL_CON(40), 8, 2, MFLAGS)),
GATE(SCLK_SPDIF8CH, "sclk_spdif_8ch", "spdif_8ch_mux", 0,
GATE(SCLK_SPDIF8CH, "sclk_spdif_8ch", "spdif_8ch_mux", CLK_SET_RATE_PARENT,
RK3288_CLKGATE_CON(4), 9, GFLAGS),
GATE(0, "sclk_acc_efuse", "xin24m", 0,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册