提交 83f26ad2 编写于 作者: D David Henningsson 提交者: Takashi Iwai

ALSA: hda - fixup D3 pin and right channel mute on Haswell HDMI audio

When graphics initializes the HDMI chip, sometimes this leads to
pins going into D3 and right channel being muted. If the audio driver
finishes initialization before the graphic driver does, this situation
becomes permanent.

This is a workaround that checks for this situation and corrects it on
playback prepare. It has been verified working on at least one machine.

BugLink: https://bugs.launchpad.net/bugs/1167270Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 5ead56f2
......@@ -1018,6 +1018,41 @@ static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
hdmi_non_intrinsic_event(codec, res);
}
static void haswell_verify_pin_D0(struct hda_codec *codec, hda_nid_t nid)
{
int pwr, lamp, ramp;
pwr = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_POWER_STATE, 0);
pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT;
if (pwr != AC_PWRST_D0) {
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE,
AC_PWRST_D0);
msleep(40);
pwr = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_POWER_STATE, 0);
pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT;
snd_printd("Haswell HDMI audio: Power for pin 0x%x is now D%d\n", nid, pwr);
}
lamp = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_AMP_GAIN_MUTE,
AC_AMP_GET_LEFT | AC_AMP_GET_OUTPUT);
ramp = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_AMP_GAIN_MUTE,
AC_AMP_GET_RIGHT | AC_AMP_GET_OUTPUT);
if (lamp != ramp) {
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
AC_AMP_SET_RIGHT | AC_AMP_SET_OUTPUT | lamp);
lamp = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_AMP_GAIN_MUTE,
AC_AMP_GET_LEFT | AC_AMP_GET_OUTPUT);
ramp = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_AMP_GAIN_MUTE,
AC_AMP_GET_RIGHT | AC_AMP_GET_OUTPUT);
snd_printd("Haswell HDMI audio: Mute after set on pin 0x%x: [0x%x 0x%x]\n", nid, lamp, ramp);
}
}
/*
* Callbacks
*/
......@@ -1032,6 +1067,9 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
int pinctl;
int new_pinctl = 0;
if (codec->vendor_id == 0x80862807)
haswell_verify_pin_D0(codec, pin_nid);
if (snd_hda_query_pin_caps(codec, pin_nid) & AC_PINCAP_HBR) {
pinctl = snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册