提交 83bad206 编写于 作者: Y Yuval Mintz 提交者: David S. Miller

bnx2x: Add a fallback multi-function mode NPAR1.5

When using new Multi-function modes it's possible that due to incompatible
configuration management FW will fallback into an existing mode.

Notice that at the moment this fallback is exactly the same as the already
existing switch-independent multi-function mode, but we still use existing
infrastructure to hold this information [in case some small differences will
arise in the future].
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDmitry Kravkov <Dmitry.Kravkov@qlogic.com>
Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 7609647e
......@@ -1451,6 +1451,7 @@ struct bnx2x_fp_stats {
enum {
SUB_MF_MODE_UNKNOWN = 0,
SUB_MF_MODE_UFP,
SUB_MF_MODE_NPAR1_DOT_5,
};
struct bnx2x {
......
......@@ -280,17 +280,11 @@ struct shared_hw_cfg { /* NVRAM Offset */
#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_BOTH 0x60000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_SWAPPED 0x80000000
u32 power_dissipated; /* 0x11c */
#define SHARED_HW_CFG_POWER_MGNT_SCALE_MASK 0x00ff0000
#define SHARED_HW_CFG_POWER_MGNT_SCALE_SHIFT 16
#define SHARED_HW_CFG_POWER_MGNT_UNKNOWN_SCALE 0x00000000
#define SHARED_HW_CFG_POWER_MGNT_DOT_1_WATT 0x00010000
#define SHARED_HW_CFG_POWER_MGNT_DOT_01_WATT 0x00020000
#define SHARED_HW_CFG_POWER_MGNT_DOT_001_WATT 0x00030000
#define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000
#define SHARED_HW_CFG_POWER_DIS_CMN_SHIFT 24
u32 config_3; /* 0x11C */
#define SHARED_HW_CFG_EXTENDED_MF_MODE_MASK 0x00000F00
#define SHARED_HW_CFG_EXTENDED_MF_MODE_SHIFT 8
#define SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR1_DOT_5 0x00000000
#define SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR2_DOT_0 0x00000100
u32 ump_nc_si_config; /* 0x120 */
#define SHARED_HW_CFG_UMP_NC_SI_MII_MODE_MASK 0x00000003
......@@ -860,6 +854,7 @@ struct shared_feat_cfg { /* NVRAM Offset */
#define SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT 0x00000300
#define SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE 0x00000400
#define SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE 0x00000600
#define SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE 0x00000700
/* The interval in seconds between sending LLDP packets. Set to zero
to disable the feature */
......
......@@ -11624,11 +11624,27 @@ static bool bnx2x_get_dropless_info(struct bnx2x *bp)
return cfg;
}
static void validate_set_si_mode(struct bnx2x *bp)
{
u8 func = BP_ABS_FUNC(bp);
u32 val;
val = MF_CFG_RD(bp, func_mf_config[func].mac_upper);
/* check for legal mac (upper bytes) */
if (val != 0xffff) {
bp->mf_mode = MULTI_FUNCTION_SI;
bp->mf_config[BP_VN(bp)] =
MF_CFG_RD(bp, func_mf_config[func].config);
} else
BNX2X_DEV_INFO("illegal MAC address for SI\n");
}
static int bnx2x_get_hwinfo(struct bnx2x *bp)
{
int /*abs*/func = BP_ABS_FUNC(bp);
int vn;
u32 val = 0;
u32 val = 0, val2 = 0;
int rc = 0;
bnx2x_get_common_hwinfo(bp);
......@@ -11738,15 +11754,7 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
switch (val) {
case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
val = MF_CFG_RD(bp, func_mf_config[func].
mac_upper);
/* check for legal mac (upper bytes)*/
if (val != 0xffff) {
bp->mf_mode = MULTI_FUNCTION_SI;
bp->mf_config[vn] = MF_CFG_RD(bp,
func_mf_config[func].config);
} else
BNX2X_DEV_INFO("illegal MAC address for SI\n");
validate_set_si_mode(bp);
break;
case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE:
if ((!CHIP_IS_E1x(bp)) &&
......@@ -11784,6 +11792,23 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
bp->mf_config[vn] = 0;
break;
case SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE:
val2 = SHMEM_RD(bp,
dev_info.shared_hw_config.config_3);
val2 &= SHARED_HW_CFG_EXTENDED_MF_MODE_MASK;
switch (val2) {
case SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR1_DOT_5:
validate_set_si_mode(bp);
bp->mf_sub_mode =
SUB_MF_MODE_NPAR1_DOT_5;
break;
default:
/* Unknown configuration */
bp->mf_config[vn] = 0;
BNX2X_DEV_INFO("unknown extended MF mode 0x%x\n",
val);
}
break;
default:
/* Unknown configuration: reset mf_config */
bp->mf_config[vn] = 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册