ARM: EXYNOS: reset Little cores when cpu is up

The cpu booting of exynos5422 has been still broken since we discussed
it in last year[1]. This patch is inspired from Odroid XU3
code (Actually, it was from samsung exynos vendor kernel)[2]. This weird
reset code was founded exynos5420 octa cores series SoCs and only
required for the first boot core is the Little core (Cortex A7).
Some of the exynos5420 boards and all of the exynos5422 boards will require
this code.

There is two ways to check the little core is the first cpu. One is
checking GPG2CON[1] GPIO value and the other is checking the cluster
number of the first cpu. I selected the latter because it's more easier
than the former.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-June/350632.html
[2] https://patchwork.kernel.org/patch/6782891/

Cc: Kevin Hilman <khilman@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NChanho Park <parkch98@gmail.com>
Cc: <stable@vger.kernel.org> # 4.1+
[k.kozlowski: Adding stable for v4.1+, reformat comment]
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

arch/arm/mach-exynos/mcpm-exynos.c

@@ -20,6 +20,7 @@
 #include <asm/cputype.h>
 #include <asm/cp15.h>
 #include <asm/mcpm.h>
+#include <asm/smp_plat.h>
 
 #include "regs-pmu.h"
 #include "common.h"
@@ -70,7 +71,31 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 		cluster >= EXYNOS5420_NR_CLUSTERS)
 		return -EINVAL;
 
-	exynos_cpu_power_up(cpunr);
+	if (!exynos_cpu_power_state(cpunr)) {
+		exynos_cpu_power_up(cpunr);
+
+		/*
+		 * This assumes the cluster number of the big cores(Cortex A15)
+		 * is 0 and the Little cores(Cortex A7) is 1.
+		 * When the system was booted from the Little core,
+		 * they should be reset during power up cpu.
+		 */
+		if (cluster &&
+		    cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
+			/*
+			 * Before we reset the Little cores, we should wait
+			 * the SPARE2 register is set to 1 because the init
+			 * codes of the iROM will set the register after
+			 * initialization.
+			 */
+			while (!pmu_raw_readl(S5P_PMU_SPARE2))
+				udelay(10);
+
+			pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
+					EXYNOS_SWRESET);
+		}
+	}
+
 	return 0;
 }
 

arch/arm/mach-exynos/regs-pmu.h

@@ -513,6 +513,12 @@ static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
 #define SPREAD_ENABLE						0xF
 #define SPREAD_USE_STANDWFI					0xF
 
+#define EXYNOS5420_KFC_CORE_RESET0				BIT(8)
+#define EXYNOS5420_KFC_ETM_RESET0				BIT(20)
+
+#define EXYNOS5420_KFC_CORE_RESET(_nr)				\
+	((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
+
 #define EXYNOS5420_BB_CON1					0x0784
 #define EXYNOS5420_BB_SEL_EN					BIT(31)
 #define EXYNOS5420_BB_PMOS_EN					BIT(7)