ARM: S3C24XX: Move mach-s3c2410/ pll into mach-s3c24xx/

This patch moves mach-s3c2410/pll into mach-s3c24xx/
and removes arch/arm/mach-s3c2410/ directory in kernel.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s3c2410/Kconfig

-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# cpu frequency scaling support
-
-config S3C2410_PLLTABLE
-	bool
-	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
-	default y
-	help
-	  Select the PLL table for the S3C2410
-

arch/arm/mach-s3c2410/Makefile

-# arch/arm/mach-s3c2410/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
-

arch/arm/mach-s3c24xx/Kconfig

@@ -134,6 +134,13 @@ config S3C2410_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2410
 
+config S3C2410_PLL
+	bool
+	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help

arch/arm/mach-s3c24xx/Makefile

@@ -19,6 +19,7 @@ obj-y				+= common.o
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
 obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpufreq-s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o irq-s3c2412.o clock-s3c2412.o

arch/arm/mach-s3c2410/pll.c → arch/arm/mach-s3c24xx/pll-s3c2410.c

-/* arch/arm/mach-s3c2410/pll.c
- *
+/*
  * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -82,7 +81,6 @@ static int __init s3c2410_pll_init(void)
 	return subsys_interface_register(&s3c2410_plls_interface);
 
 }
-
 arch_initcall(s3c2410_pll_init);
 
 static struct subsys_interface s3c2410a_plls_interface = {
@@ -95,5 +93,4 @@ static int __init s3c2410a_pll_init(void)
 {
 	return subsys_interface_register(&s3c2410a_plls_interface);
 }
-
 arch_initcall(s3c2410a_pll_init);