提交 822473b6 编写于 作者: G govindarajulu.v 提交者: David S. Miller

driver/net: enic: Add multi tx support for enic

The following patch adds multi tx support for enic.
Signed-off-by: NNishank Trivedi <nistrive@cisco.com>
Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NGovindarajulu Varadarajan <govindarajulu90@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 3c3769e6
......@@ -37,7 +37,7 @@
#define ENIC_BARS_MAX 6
#define ENIC_WQ_MAX 1
#define ENIC_WQ_MAX 8
#define ENIC_RQ_MAX 8
#define ENIC_CQ_MAX (ENIC_WQ_MAX + ENIC_RQ_MAX)
#define ENIC_INTR_MAX (ENIC_CQ_MAX + 2)
......
......@@ -128,10 +128,10 @@ static int enic_wq_service(struct vnic_dev *vdev, struct cq_desc *cq_desc,
completed_index, enic_wq_free_buf,
opaque);
if (netif_queue_stopped(enic->netdev) &&
if (netif_tx_queue_stopped(netdev_get_tx_queue(enic->netdev, q_number)) &&
vnic_wq_desc_avail(&enic->wq[q_number]) >=
(MAX_SKB_FRAGS + ENIC_DESC_MAX_SPLITS))
netif_wake_queue(enic->netdev);
netif_wake_subqueue(enic->netdev, q_number);
spin_unlock(&enic->wq_lock[q_number]);
......@@ -292,10 +292,15 @@ static irqreturn_t enic_isr_msix_rq(int irq, void *data)
static irqreturn_t enic_isr_msix_wq(int irq, void *data)
{
struct enic *enic = data;
unsigned int cq = enic_cq_wq(enic, 0);
unsigned int intr = enic_msix_wq_intr(enic, 0);
unsigned int cq;
unsigned int intr;
unsigned int wq_work_to_do = -1; /* no limit */
unsigned int wq_work_done;
unsigned int wq_irq;
wq_irq = (u32)irq - enic->msix_entry[enic_msix_wq_intr(enic, 0)].vector;
cq = enic_cq_wq(enic, wq_irq);
intr = enic_msix_wq_intr(enic, wq_irq);
wq_work_done = vnic_cq_service(&enic->cq[cq],
wq_work_to_do, enic_wq_service, NULL);
......@@ -511,14 +516,18 @@ static netdev_tx_t enic_hard_start_xmit(struct sk_buff *skb,
struct net_device *netdev)
{
struct enic *enic = netdev_priv(netdev);
struct vnic_wq *wq = &enic->wq[0];
struct vnic_wq *wq;
unsigned long flags;
unsigned int txq_map;
if (skb->len <= 0) {
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
txq_map = skb_get_queue_mapping(skb) % enic->wq_count;
wq = &enic->wq[txq_map];
/* Non-TSO sends must fit within ENIC_NON_TSO_MAX_DESC descs,
* which is very likely. In the off chance it's going to take
* more than * ENIC_NON_TSO_MAX_DESC, linearize the skb.
......@@ -531,23 +540,23 @@ static netdev_tx_t enic_hard_start_xmit(struct sk_buff *skb,
return NETDEV_TX_OK;
}
spin_lock_irqsave(&enic->wq_lock[0], flags);
spin_lock_irqsave(&enic->wq_lock[txq_map], flags);
if (vnic_wq_desc_avail(wq) <
skb_shinfo(skb)->nr_frags + ENIC_DESC_MAX_SPLITS) {
netif_stop_queue(netdev);
netif_tx_stop_queue(netdev_get_tx_queue(netdev, txq_map));
/* This is a hard error, log it */
netdev_err(netdev, "BUG! Tx ring full when queue awake!\n");
spin_unlock_irqrestore(&enic->wq_lock[0], flags);
spin_unlock_irqrestore(&enic->wq_lock[txq_map], flags);
return NETDEV_TX_BUSY;
}
enic_queue_wq_skb(enic, wq, skb);
if (vnic_wq_desc_avail(wq) < MAX_SKB_FRAGS + ENIC_DESC_MAX_SPLITS)
netif_stop_queue(netdev);
netif_tx_stop_queue(netdev_get_tx_queue(netdev, txq_map));
spin_unlock_irqrestore(&enic->wq_lock[0], flags);
spin_unlock_irqrestore(&enic->wq_lock[txq_map], flags);
return NETDEV_TX_OK;
}
......@@ -1369,7 +1378,7 @@ static int enic_open(struct net_device *netdev)
enic_set_rx_mode(netdev);
netif_wake_queue(netdev);
netif_tx_wake_all_queues(netdev);
for (i = 0; i < enic->rq_count; i++)
napi_enable(&enic->napi[i]);
......@@ -2032,7 +2041,8 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
* instance data is initialized to zero.
*/
netdev = alloc_etherdev(sizeof(struct enic));
netdev = alloc_etherdev_mqs(sizeof(struct enic),
ENIC_RQ_MAX, ENIC_WQ_MAX);
if (!netdev)
return -ENOMEM;
......@@ -2198,6 +2208,8 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_dev_close;
}
netif_set_real_num_tx_queues(netdev, enic->wq_count);
/* Setup notification timer, HW reset task, and wq locks
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册