提交 82039d24 编写于 作者: S Sebastian Reichel 提交者: Linus Walleij

pinctrl: mcp23s08: add pinconf support

mcp23xxx device have configurable 100k pullup resistors. This adds
support for enabling them using pinctrl's pinconf interface.
Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Tested-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 64ac43e6
......@@ -153,6 +153,7 @@ config PINCTRL_MCP23S08
select GPIOLIB_IRQCHIP
select REGMAP_I2C if I2C
select REGMAP_SPI if SPI_MASTER
select GENERIC_PINCONF
help
SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
I/O expanders.
......
......@@ -24,6 +24,9 @@
#include <linux/of_irq.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
/**
* MCP types supported by driver
......@@ -77,6 +80,9 @@ struct mcp23s08 {
struct regmap *regmap;
struct device *dev;
struct pinctrl_dev *pctldev;
struct pinctrl_desc pinctrl_desc;
};
static const struct regmap_config mcp23x08_regmap = {
......@@ -96,6 +102,158 @@ static const struct regmap_config mcp23x17_regmap = {
.val_format_endian = REGMAP_ENDIAN_LITTLE,
};
static int mcp_read(struct mcp23s08 *mcp, unsigned int reg, unsigned int *val)
{
return regmap_read(mcp->regmap, reg << mcp->reg_shift, val);
}
static int mcp_write(struct mcp23s08 *mcp, unsigned int reg, unsigned int val)
{
return regmap_write(mcp->regmap, reg << mcp->reg_shift, val);
}
static int mcp_set_bit(struct mcp23s08 *mcp, unsigned int reg,
unsigned int pin, bool enabled)
{
u16 val = enabled ? 0xffff : 0x0000;
u16 mask = BIT(pin);
return regmap_update_bits(mcp->regmap, reg << mcp->reg_shift,
mask, val);
}
static int mcp_update_cache(struct mcp23s08 *mcp)
{
int ret, reg, i;
for (i = 0; i < ARRAY_SIZE(mcp->cache); i++) {
ret = mcp_read(mcp, i, &reg);
if (ret < 0)
return ret;
mcp->cache[i] = reg;
}
return 0;
}
static const struct pinctrl_pin_desc mcp23x08_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
PINCTRL_PIN(2, "gpio2"),
PINCTRL_PIN(3, "gpio3"),
PINCTRL_PIN(4, "gpio4"),
PINCTRL_PIN(5, "gpio5"),
PINCTRL_PIN(6, "gpio6"),
PINCTRL_PIN(7, "gpio7"),
};
static const struct pinctrl_pin_desc mcp23x17_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
PINCTRL_PIN(2, "gpio2"),
PINCTRL_PIN(3, "gpio3"),
PINCTRL_PIN(4, "gpio4"),
PINCTRL_PIN(5, "gpio5"),
PINCTRL_PIN(6, "gpio6"),
PINCTRL_PIN(7, "gpio7"),
PINCTRL_PIN(8, "gpio8"),
PINCTRL_PIN(9, "gpio9"),
PINCTRL_PIN(10, "gpio10"),
PINCTRL_PIN(11, "gpio11"),
PINCTRL_PIN(12, "gpio12"),
PINCTRL_PIN(13, "gpio13"),
PINCTRL_PIN(14, "gpio14"),
PINCTRL_PIN(15, "gpio15"),
};
static int mcp_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
return 0;
}
static const char *mcp_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
unsigned int group)
{
return NULL;
}
static int mcp_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
unsigned int group,
const unsigned int **pins,
unsigned int *num_pins)
{
return -ENOTSUPP;
}
static const struct pinctrl_ops mcp_pinctrl_ops = {
.get_groups_count = mcp_pinctrl_get_groups_count,
.get_group_name = mcp_pinctrl_get_group_name,
.get_group_pins = mcp_pinctrl_get_group_pins,
#ifdef CONFIG_OF
.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
.dt_free_map = pinconf_generic_dt_free_map,
#endif
};
static int mcp_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *config)
{
struct mcp23s08 *mcp = pinctrl_dev_get_drvdata(pctldev);
enum pin_config_param param = pinconf_to_config_param(*config);
unsigned int data, status;
int ret;
switch (param) {
case PIN_CONFIG_BIAS_PULL_UP:
ret = mcp_read(mcp, MCP_GPPU, &data);
if (ret < 0)
return ret;
status = (data & BIT(pin)) ? 1 : 0;
break;
default:
dev_err(mcp->dev, "Invalid config param %04x\n", param);
return -ENOTSUPP;
}
*config = 0;
return status ? 0 : -EINVAL;
}
static int mcp_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *configs, unsigned int num_configs)
{
struct mcp23s08 *mcp = pinctrl_dev_get_drvdata(pctldev);
enum pin_config_param param;
u32 arg, mask;
u16 val;
int ret = 0;
int i;
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
switch (param) {
case PIN_CONFIG_BIAS_PULL_UP:
val = arg ? 0xFFFF : 0x0000;
mask = BIT(pin);
ret = mcp_set_bit(mcp, MCP_GPPU, pin, arg);
break;
default:
dev_err(mcp->dev, "Invalid config param %04x\n", param);
return -ENOTSUPP;
}
}
return ret;
}
static const struct pinconf_ops mcp_pinconf_ops = {
.pin_config_get = mcp_pinconf_get,
.pin_config_set = mcp_pinconf_set,
.is_generic = true,
};
/*----------------------------------------------------------------------*/
#ifdef CONFIG_SPI_MASTER
......@@ -158,30 +316,6 @@ static const struct regmap_bus mcp23sxx_spi_regmap = {
#endif /* CONFIG_SPI_MASTER */
static int mcp_read(struct mcp23s08 *mcp, unsigned int reg, unsigned int *val)
{
return regmap_read(mcp->regmap, reg << mcp->reg_shift, val);
}
static int mcp_write(struct mcp23s08 *mcp, unsigned int reg, unsigned int val)
{
return regmap_write(mcp->regmap, reg << mcp->reg_shift, val);
}
static int mcp_update_cache(struct mcp23s08 *mcp)
{
int ret, reg, i;
for (i = 0; i < ARRAY_SIZE(mcp->cache); i++) {
ret = mcp_read(mcp, i, &reg);
if (ret < 0)
return ret;
mcp->cache[i] = reg;
}
return 0;
}
/*----------------------------------------------------------------------*/
/* A given spi_device can represent up to eight mcp23sxx chips
......@@ -682,6 +816,23 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
if (ret)
goto fail;
}
mcp->pinctrl_desc.name = "mcp23xxx-pinctrl";
mcp->pinctrl_desc.pctlops = &mcp_pinctrl_ops;
mcp->pinctrl_desc.confops = &mcp_pinconf_ops;
mcp->pinctrl_desc.npins = mcp->chip.ngpio;
if (mcp->pinctrl_desc.npins == 8)
mcp->pinctrl_desc.pins = mcp23x08_pins;
else if (mcp->pinctrl_desc.npins == 16)
mcp->pinctrl_desc.pins = mcp23x17_pins;
mcp->pinctrl_desc.owner = THIS_MODULE;
mcp->pctldev = devm_pinctrl_register(dev, &mcp->pinctrl_desc, mcp);
if (IS_ERR(mcp->pctldev)) {
ret = PTR_ERR(mcp->pctldev);
goto fail;
}
fail:
if (ret < 0)
dev_dbg(dev, "can't setup chip %d, --> %d\n", addr, ret);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册