Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 81cc3f86 编写于 作者: P Pawel Moll 提交者： Arnd Bergmann
浏览文件
操作

ARM: vexpress: Remove non-DT code 

Now, with the CLCD DT support available, there is no
more reason to keep the non-DT support for V2P-CA9.

Removed, together with "some" supporting code. It was
necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
and selected by the machines still interested in it.
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
上级 ad77b791
隐藏空白更改
内联 并排
Showing with 17 addition and 943 deletion
arch/arm/Kconfig
浏览文件 @ 81cc3f86
......@@ -350,6 +350,7 @@ config ARCH_REALVIEW
select ICST
select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
select PLAT_VERSATILE_SCHED_CLOCK
help
This enables support for ARM Ltd RealView boards.
......@@ -365,6 +366,7 @@ config ARCH_VERSATILE
select ICST
select PLAT_VERSATILE
select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_SCHED_CLOCK
select VERSATILE_FPGA_IRQ
help
This enables support for ARM Ltd Versatile board.
......
arch/arm/mach-vexpress/Kconfig
浏览文件 @ 81cc3f86
......@@ -49,9 +49,6 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
build a working kernel, you must also enable relevant core
tile support or Flattened Device Tree based support options.
config ARCH_VEXPRESS_CA9X4
bool "Versatile Express Cortex-A9x4 tile"
config ARCH_VEXPRESS_DCSCB
bool "Dual Cluster System Control Block (DCSCB) support"
depends on MCPM
......
arch/arm/mach-vexpress/Makefile
浏览文件 @ 81cc3f86
#
# Makefile for the linux kernel.
#
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := \
-I$(srctree)/arch/arm/plat-versatile/include
obj-y := v2m.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o
CFLAGS_dcscb.o += -march=armv7-a
CFLAGS_REMOVE_dcscb.o = -pg
......
arch/arm/mach-vexpress/core.h
浏览文件 @ 81cc3f86
/* 2MB large area for motherboard's peripherals static mapping */
#define V2M_PERIPH 0xf8000000
/* Tile's peripherals static mappings should start here */
#define V2T_PERIPH 0xf8200000
bool vexpress_smp_init_ops(void);
extern struct smp_operations vexpress_smp_ops;
extern struct smp_operations vexpress_smp_dt_ops;
extern void vexpress_cpu_die(unsigned int cpu);
arch/arm/mach-vexpress/ct-ca9x4.c 已删除 100644 → 0
浏览文件 @ ad77b791
/*
* Versatile Express Core Tile Cortex A9x4 Support
*/
#include <linux/init.h>
#include <linux/gfp.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/clkdev.h>
#include <linux/vexpress.h>
#include <linux/irqchip/arm-gic.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
#include <mach/ct-ca9x4.h>
#include <asm/hardware/timer-sp.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "core.h"
#include <mach/motherboard.h>
#include <mach/irqs.h>
static struct map_desc ct_ca9x4_io_desc[] __initdata = {
{
.virtual = V2T_PERIPH,
.pfn = __phys_to_pfn(CT_CA9X4_MPIC),
.length = SZ_8K,
.type = MT_DEVICE,
},
};
static void __init ct_ca9x4_map_io(void)
{
iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
}
static void __init ca9x4_l2_init(void)
{
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
if (l2x0_base) {
/* set RAM latencies to 1 cycle for this core tile. */
writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
} else {
pr_err("L2C: unable to map L2 cache controller\n");
}
#endif
}
#ifdef CONFIG_HAVE_ARM_TWD
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER);
static void __init ca9x4_twd_init(void)
{
int err = twd_local_timer_register(&twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
}
#else
#define ca9x4_twd_init() do {} while(0)
#endif
static void __init ct_ca9x4_init_irq(void)
{
gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
ioremap(A9_MPCORE_GIC_CPU, SZ_256));
ca9x4_twd_init();
ca9x4_l2_init();
}
static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
{
unsigned long framesize = 1024 * 768 * 2;
fb->panel = versatile_clcd_get_panel("XVGA");
if (!fb->panel)
return -EINVAL;
return versatile_clcd_setup_dma(fb, framesize);
}
static struct clcd_board ct_ca9x4_clcd_data = {
.name = "CT-CA9X4",
.caps = CLCD_CAP_5551 | CLCD_CAP_565,
.check = clcdfb_check,
.decode = clcdfb_decode,
.setup = ct_ca9x4_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
};
static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
&clcd_device,
&dmc_device,
&smc_device,
&gpio_device,
};
static struct resource pmu_resources[] = {
[0] = {
.start = IRQ_CT_CA9X4_PMU_CPU0,
.end = IRQ_CT_CA9X4_PMU_CPU0,
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = IRQ_CT_CA9X4_PMU_CPU1,
.end = IRQ_CT_CA9X4_PMU_CPU1,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_CT_CA9X4_PMU_CPU2,
.end = IRQ_CT_CA9X4_PMU_CPU2,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_CT_CA9X4_PMU_CPU3,
.end = IRQ_CT_CA9X4_PMU_CPU3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device pmu_device = {
.name = "arm-pmu",
.id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
static struct clk_lookup osc1_lookup = {
.dev_id = "ct:clcd",
};
static struct platform_device osc1_device = {
.name = "vexpress-osc",
.id = 1,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0xf, 1),
},
.dev.platform_data = &osc1_lookup,
};
static void __init ct_ca9x4_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
platform_device_register(&pmu_device);
vexpress_syscfg_device_register(&osc1_device);
}
#ifdef CONFIG_SMP
static void *ct_ca9x4_scu_base __initdata;
static void __init ct_ca9x4_init_cpu_map(void)
{
int i, ncores;
ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128);
if (WARN_ON(!ct_ca9x4_scu_base))
return;
ncores = scu_get_core_count(ct_ca9x4_scu_base);
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; ++i)
set_cpu_possible(i, true);
}
static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
{
scu_enable(ct_ca9x4_scu_base);
}
#endif
struct ct_desc ct_ca9x4_desc __initdata = {
.id = V2M_CT_ID_CA9,
.name = "CA9x4",
.map_io = ct_ca9x4_map_io,
.init_irq = ct_ca9x4_init_irq,
.init_tile = ct_ca9x4_init,
#ifdef CONFIG_SMP
.init_cpu_map = ct_ca9x4_init_cpu_map,
.smp_enable = ct_ca9x4_smp_enable,
#endif
};
arch/arm/mach-vexpress/include/mach/ct-ca9x4.h 已删除 100644 → 0
浏览文件 @ ad77b791
#ifndef __MACH_CT_CA9X4_H
#define __MACH_CT_CA9X4_H
/*
* Physical base addresses
*/
#define CT_CA9X4_CLCDC (0x10020000)
#define CT_CA9X4_AXIRAM (0x10060000)
#define CT_CA9X4_DMC (0x100e0000)
#define CT_CA9X4_SMC (0x100e1000)
#define CT_CA9X4_SCC (0x100e2000)
#define CT_CA9X4_SP804_TIMER (0x100e4000)
#define CT_CA9X4_SP805_WDT (0x100e5000)
#define CT_CA9X4_TZPC (0x100e6000)
#define CT_CA9X4_GPIO (0x100e8000)
#define CT_CA9X4_FASTAXI (0x100e9000)
#define CT_CA9X4_SLOWAXI (0x100ea000)
#define CT_CA9X4_TZASC (0x100ec000)
#define CT_CA9X4_CORESIGHT (0x10200000)
#define CT_CA9X4_MPIC (0x1e000000)
#define CT_CA9X4_SYSTIMER (0x1e004000)
#define CT_CA9X4_SYSWDT (0x1e007000)
#define CT_CA9X4_L2CC (0x1e00a000)
#define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000)
#define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100)
#define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200)
#define A9_MPCORE_TWD (CT_CA9X4_MPIC + 0x0600)
#define A9_MPCORE_GIC_DIST (CT_CA9X4_MPIC + 0x1000)
/*
* Interrupts. Those in {} are for AMBA devices
*/
#define IRQ_CT_CA9X4_CLCDC { 76 }
#define IRQ_CT_CA9X4_DMC { 0 }
#define IRQ_CT_CA9X4_SMC { 77, 78 }
#define IRQ_CT_CA9X4_TIMER0 80
#define IRQ_CT_CA9X4_TIMER1 81
#define IRQ_CT_CA9X4_GPIO { 82 }
#define IRQ_CT_CA9X4_PMU_CPU0 92
#define IRQ_CT_CA9X4_PMU_CPU1 93
#define IRQ_CT_CA9X4_PMU_CPU2 94
#define IRQ_CT_CA9X4_PMU_CPU3 95
extern struct ct_desc ct_ca9x4_desc;
#endif
arch/arm/mach-vexpress/include/mach/irqs.h 已删除 100644 → 0
浏览文件 @ ad77b791
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
#ifndef CONFIG_SPARSE_IRQ
#define NR_IRQS 256
#endif
arch/arm/mach-vexpress/include/mach/motherboard.h 已删除 100644 → 0
浏览文件 @ ad77b791
#ifndef __MACH_MOTHERBOARD_H
#define __MACH_MOTHERBOARD_H
/*
* Physical addresses, offset from V2M_PA_CS0-3
*/
#define V2M_NOR0 (V2M_PA_CS0)
#define V2M_NOR1 (V2M_PA_CS1)
#define V2M_SRAM (V2M_PA_CS2)
#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000)
#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000)
#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000)
/*
* Physical addresses, offset from V2M_PA_CS7
*/
#define V2M_SYSREGS (V2M_PA_CS7 + 0x00000000)
#define V2M_SYSCTL (V2M_PA_CS7 + 0x00001000)
#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + 0x00002000)
#define V2M_AACI (V2M_PA_CS7 + 0x00004000)
#define V2M_MMCI (V2M_PA_CS7 + 0x00005000)
#define V2M_KMI0 (V2M_PA_CS7 + 0x00006000)
#define V2M_KMI1 (V2M_PA_CS7 + 0x00007000)
#define V2M_UART0 (V2M_PA_CS7 + 0x00009000)
#define V2M_UART1 (V2M_PA_CS7 + 0x0000a000)
#define V2M_UART2 (V2M_PA_CS7 + 0x0000b000)
#define V2M_UART3 (V2M_PA_CS7 + 0x0000c000)
#define V2M_WDT (V2M_PA_CS7 + 0x0000f000)
#define V2M_TIMER01 (V2M_PA_CS7 + 0x00011000)
#define V2M_TIMER23 (V2M_PA_CS7 + 0x00012000)
#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + 0x00016000)
#define V2M_RTC (V2M_PA_CS7 + 0x00017000)
#define V2M_CF (V2M_PA_CS7 + 0x0001a000)
#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000)
/*
* Interrupts. Those in {} are for AMBA devices
*/
#define IRQ_V2M_WDT { (32 + 0) }
#define IRQ_V2M_TIMER0 (32 + 2)
#define IRQ_V2M_TIMER1 (32 + 2)
#define IRQ_V2M_TIMER2 (32 + 3)
#define IRQ_V2M_TIMER3 (32 + 3)
#define IRQ_V2M_RTC { (32 + 4) }
#define IRQ_V2M_UART0 { (32 + 5) }
#define IRQ_V2M_UART1 { (32 + 6) }
#define IRQ_V2M_UART2 { (32 + 7) }
#define IRQ_V2M_UART3 { (32 + 8) }
#define IRQ_V2M_MMCI { (32 + 9), (32 + 10) }
#define IRQ_V2M_AACI { (32 + 11) }
#define IRQ_V2M_KMI0 { (32 + 12) }
#define IRQ_V2M_KMI1 { (32 + 13) }
#define IRQ_V2M_CLCD { (32 + 14) }
#define IRQ_V2M_LAN9118 (32 + 15)
#define IRQ_V2M_ISP1761 (32 + 16)
#define IRQ_V2M_PCIE (32 + 17)
/*
* Core tile IDs
*/
#define V2M_CT_ID_CA9 0x0c000191
#define V2M_CT_ID_UNSUPPORTED 0xff000191
#define V2M_CT_ID_MASK 0xff000fff
struct ct_desc {
u32 id;
const char *name;
void (*map_io)(void);
void (*init_early)(void);
void (*init_irq)(void);
void (*init_tile)(void);
#ifdef CONFIG_SMP
void (*init_cpu_map)(void);
void (*smp_enable)(unsigned int);
#endif
};
extern struct ct_desc *ct_desc;
#endif
arch/arm/mach-vexpress/platsmp.c
浏览文件 @ 81cc3f86
......@@ -19,48 +19,10 @@
#include <asm/smp_scu.h>
#include <asm/mach/map.h>
#include <mach/motherboard.h>
#include <plat/platsmp.h>
#include "core.h"
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
static void __init vexpress_smp_init_cpus(void)
{
ct_desc->init_cpu_map();
}
static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
{
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
*/
ct_desc->smp_enable(max_cpus);
/*
* Write the address of secondary startup into the
* system-wide flags register. The boot monitor waits
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
}
struct smp_operations __initdata vexpress_smp_ops = {
.smp_init_cpus = vexpress_smp_init_cpus,
.smp_prepare_cpus = vexpress_smp_prepare_cpus,
.smp_secondary_init = versatile_secondary_init,
.smp_boot_secondary = versatile_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = vexpress_cpu_die,
#endif
};
bool __init vexpress_smp_init_ops(void)
{
#ifdef CONFIG_MCPM
......@@ -79,8 +41,6 @@ bool __init vexpress_smp_init_ops(void)
return false;
}
#if defined(CONFIG_OF)
static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = {
{ .compatible = "arm,cortex-a5-scu", },
{ .compatible = "arm,cortex-a9-scu", },
......@@ -112,5 +72,3 @@ struct smp_operations __initdata vexpress_smp_dt_ops = {
.cpu_die = vexpress_cpu_die,
#endif
};
#endif
arch/arm/mach-vexpress/v2m.c
浏览文件 @ 81cc3f86
/*
* Versatile Express V2M Motherboard Support
*/
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/smsc911x.h>
#include <linux/spinlock.h>
#include <linux/usb/isp1760.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/vexpress.h>
#include <linux/clkdev.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/timer-sp.h>
#include <mach/ct-ca9x4.h>
#include <mach/motherboard.h>
#include <plat/sched_clock.h>
#include <plat/platsmp.h>
#include "core.h"
#define V2M_PA_CS0 0x40000000
#define V2M_PA_CS1 0x44000000
#define V2M_PA_CS2 0x48000000
#define V2M_PA_CS3 0x4c000000
#define V2M_PA_CS7 0x10000000
static struct map_desc v2m_io_desc[] __initdata = {
{
.virtual = V2M_PERIPH,
.pfn = __phys_to_pfn(V2M_PA_CS7),
.length = SZ_128K,
.type = MT_DEVICE,
},
};
static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
{
if (WARN_ON(!base || irq == NO_IRQ))
return;
sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
}
static struct resource v2m_pcie_i2c_resource = {
.start = V2M_SERIAL_BUS_PCI,
.end = V2M_SERIAL_BUS_PCI + SZ_4K - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device v2m_pcie_i2c_device = {
.name = "versatile-i2c",
.id = 0,
.num_resources = 1,
.resource = &v2m_pcie_i2c_resource,
};
static struct resource v2m_ddc_i2c_resource = {
.start = V2M_SERIAL_BUS_DVI,
.end = V2M_SERIAL_BUS_DVI + SZ_4K - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device v2m_ddc_i2c_device = {
.name = "versatile-i2c",
.id = 1,
.num_resources = 1,
.resource = &v2m_ddc_i2c_resource,
};
static struct resource v2m_eth_resources[] = {
{
.start = V2M_LAN9118,
.end = V2M_LAN9118 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_V2M_LAN9118,
.end = IRQ_V2M_LAN9118,
.flags = IORESOURCE_IRQ,
},
};
static struct smsc911x_platform_config v2m_eth_config = {
.flags = SMSC911X_USE_32BIT,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device v2m_eth_device = {
.name = "smsc911x",
.id = -1,
.resource = v2m_eth_resources,
.num_resources = ARRAY_SIZE(v2m_eth_resources),
.dev.platform_data = &v2m_eth_config,
};
static struct regulator_consumer_supply v2m_eth_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
static struct resource v2m_usb_resources[] = {
{
.start = V2M_ISP1761,
.end = V2M_ISP1761 + SZ_128K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_V2M_ISP1761,
.end = IRQ_V2M_ISP1761,
.flags = IORESOURCE_IRQ,
},
};
static struct isp1760_platform_data v2m_usb_config = {
.is_isp1761 = true,
.bus_width_16 = false,
.port1_otg = true,
.analog_oc = false,
.dack_polarity_high = false,
.dreq_polarity_high = false,
};
static struct platform_device v2m_usb_device = {
.name = "isp1760",
.id = -1,
.resource = v2m_usb_resources,
.num_resources = ARRAY_SIZE(v2m_usb_resources),
.dev.platform_data = &v2m_usb_config,
};
static struct physmap_flash_data v2m_flash_data = {
.width = 4,
};
static struct resource v2m_flash_resources[] = {
{
.start = V2M_NOR0,
.end = V2M_NOR0 + SZ_64M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = V2M_NOR1,
.end = V2M_NOR1 + SZ_64M - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device v2m_flash_device = {
.name = "physmap-flash",
.id = -1,
.resource = v2m_flash_resources,
.num_resources = ARRAY_SIZE(v2m_flash_resources),
.dev.platform_data = &v2m_flash_data,
};
static struct pata_platform_info v2m_pata_data = {
.ioport_shift = 2,
};
static struct resource v2m_pata_resources[] = {
{
.start = V2M_CF,
.end = V2M_CF + 0xff,
.flags = IORESOURCE_MEM,
}, {
.start = V2M_CF + 0x100,
.end = V2M_CF + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device v2m_cf_device = {
.name = "pata_platform",
.id = -1,
.resource = v2m_pata_resources,
.num_resources = ARRAY_SIZE(v2m_pata_resources),
.dev.platform_data = &v2m_pata_data,
};
static struct mmci_platform_data v2m_mmci_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = vexpress_get_mci_cardin,
.gpio_cd = -1,
.gpio_wp = -1,
};
static struct resource v2m_sysreg_resources[] = {
{
.start = V2M_SYSREGS,
.end = V2M_SYSREGS + 0xfff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device v2m_sysreg_device = {
.name = "vexpress-sysreg",
.id = -1,
.resource = v2m_sysreg_resources,
.num_resources = ARRAY_SIZE(v2m_sysreg_resources),
};
static struct platform_device v2m_muxfpga_device = {
.name = "vexpress-muxfpga",
.id = 0,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0, 7),
}
};
static struct platform_device v2m_shutdown_device = {
.name = "vexpress-shutdown",
.id = 0,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0, 8),
}
};
static struct platform_device v2m_reboot_device = {
.name = "vexpress-reboot",
.id = 0,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0, 9),
}
};
static struct platform_device v2m_dvimode_device = {
.name = "vexpress-dvimode",
.id = 0,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0, 11),
}
};
static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL);
static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL);
static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL);
static struct amba_device *v2m_amba_devs[] __initdata = {
&aaci_device,
&mmci_device,
&kmi0_device,
&kmi1_device,
&uart0_device,
&uart1_device,
&uart2_device,
&uart3_device,
&wdt_device,
&rtc_device,
};
static void __init v2m_timer_init(void)
{
vexpress_clk_init(ioremap(V2M_SYSCTL, SZ_4K));
v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
}
static void __init v2m_init_early(void)
{
if (ct_desc->init_early)
ct_desc->init_early();
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
}
struct ct_desc *ct_desc;
static struct ct_desc *ct_descs[] __initdata = {
#ifdef CONFIG_ARCH_VEXPRESS_CA9X4
&ct_ca9x4_desc,
#endif
};
static void __init v2m_populate_ct_desc(void)
{
int i;
u32 current_tile_id;
ct_desc = NULL;
current_tile_id = vexpress_get_procid(VEXPRESS_SITE_MASTER)
& V2M_CT_ID_MASK;
for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i)
if (ct_descs[i]->id == current_tile_id)
ct_desc = ct_descs[i];
if (!ct_desc)
panic("vexpress: this kernel does not support core tile ID 0x%08x when booting via ATAGs.\n"
"You may need a device tree blob or a different kernel to boot on this board.\n",
current_tile_id);
}
static void __init v2m_map_io(void)
{
iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
vexpress_sysreg_early_init(ioremap(V2M_SYSREGS, SZ_4K));
v2m_populate_ct_desc();
ct_desc->map_io();
}
static void __init v2m_init_irq(void)
{
ct_desc->init_irq();
}
static void __init v2m_init(void)
{
int i;
regulator_register_fixed(0, v2m_eth_supplies,
ARRAY_SIZE(v2m_eth_supplies));
platform_device_register(&v2m_sysreg_device);
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
platform_device_register(&v2m_flash_device);
platform_device_register(&v2m_cf_device);
platform_device_register(&v2m_eth_device);
platform_device_register(&v2m_usb_device);
for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
amba_device_register(v2m_amba_devs[i], &iomem_resource);
vexpress_syscfg_device_register(&v2m_muxfpga_device);
vexpress_syscfg_device_register(&v2m_shutdown_device);
vexpress_syscfg_device_register(&v2m_reboot_device);
vexpress_syscfg_device_register(&v2m_dvimode_device);
ct_desc->init_tile();
}
MACHINE_START(VEXPRESS, "ARM-Versatile Express")
.atag_offset = 0x100,
.smp = smp_ops(vexpress_smp_ops),
.map_io = v2m_map_io,
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
.init_time = v2m_timer_init,
.init_machine = v2m_init,
MACHINE_END
static void __init v2m_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const v2m_dt_match[] __initconst = {
"arm,vexpress",
NULL,
......@@ -386,5 +13,4 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
.l2c_aux_mask = 0xfe0fffff,
.smp = smp_ops(vexpress_smp_dt_ops),
.smp_init = smp_init_ops(vexpress_smp_init_ops),
.init_machine = v2m_dt_init,
MACHINE_END
arch/arm/plat-versatile/Kconfig
浏览文件 @ 81cc3f86
......@@ -4,6 +4,6 @@ config PLAT_VERSATILE_CLOCK
bool
config PLAT_VERSATILE_SCHED_CLOCK
def_bool y
bool
endif
drivers/clk/versatile/Makefile
浏览文件 @ 81cc3f86
......@@ -2,6 +2,5 @@
obj-$(CONFIG_ICST) += clk-icst.o clk-versatile.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o
obj-$(CONFIG_CLK_SP810) += clk-sp810.o
obj-$(CONFIG_CLK_VEXPRESS_OSC) += clk-vexpress-osc.o
drivers/clk/versatile/clk-vexpress-osc.c
浏览文件 @ 81cc3f86
......@@ -70,7 +70,6 @@ static struct clk_ops vexpress_osc_ops = {
static int vexpress_osc_probe(struct platform_device *pdev)
{
struct clk_lookup *cl = pdev->dev.platform_data; /* Non-DT lookup */
struct clk_init_data init;
struct vexpress_osc *osc;
struct clk *clk;
......@@ -106,12 +105,6 @@ static int vexpress_osc_probe(struct platform_device *pdev)
of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, clk);
/* Only happens for non-DT cases */
if (cl) {
cl->clk = clk;
clkdev_add(cl);
}
dev_dbg(&pdev->dev, "Registered clock '%s'\n", init.name);
return 0;
......
drivers/clk/versatile/clk-vexpress.c 已删除 100644 → 0
浏览文件 @ ad77b791
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright (C) 2012 ARM Limited
*/
#include <linux/amba/sp810.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/vexpress.h>
static struct clk *vexpress_sp810_timerclken[4];
static DEFINE_SPINLOCK(vexpress_sp810_lock);
static void __init vexpress_sp810_init(void __iomem *base)
{
int i;
if (WARN_ON(!base))
return;
for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) {
char name[12];
const char *parents[] = {
"v2m:refclk32khz", /* REFCLK */
"v2m:refclk1mhz" /* TIMCLK */
};
snprintf(name, ARRAY_SIZE(name), "timerclken%d", i);
vexpress_sp810_timerclken[i] = clk_register_mux(NULL, name,
parents, 2, CLK_SET_RATE_NO_REPARENT,
base + SCCTRL, SCCTRL_TIMERENnSEL_SHIFT(i), 1,
0, &vexpress_sp810_lock);
if (WARN_ON(IS_ERR(vexpress_sp810_timerclken[i])))
break;
}
}
static const char * const vexpress_clk_24mhz_periphs[] __initconst = {
"mb:uart0", "mb:uart1", "mb:uart2", "mb:uart3",
"mb:mmci", "mb:kmi0", "mb:kmi1"
};
void __init vexpress_clk_init(void __iomem *sp810_base)
{
struct clk *clk;
int i;
clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL,
CLK_IS_ROOT, 0);
WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL));
clk = clk_register_fixed_rate(NULL, "v2m:clk_24mhz", NULL,
CLK_IS_ROOT, 24000000);
for (i = 0; i < ARRAY_SIZE(vexpress_clk_24mhz_periphs); i++)
WARN_ON(clk_register_clkdev(clk, NULL,
vexpress_clk_24mhz_periphs[i]));
clk = clk_register_fixed_rate(NULL, "v2m:refclk32khz", NULL,
CLK_IS_ROOT, 32768);
WARN_ON(clk_register_clkdev(clk, NULL, "v2m:wdt"));
clk = clk_register_fixed_rate(NULL, "v2m:refclk1mhz", NULL,
CLK_IS_ROOT, 1000000);
vexpress_sp810_init(sp810_base);
for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++)
WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], clk));
WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0],
"v2m-timer0", "sp804"));
WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1],
"v2m-timer1", "sp804"));
}
drivers/misc/vexpress-syscfg.c
浏览文件 @ 81cc3f86
......@@ -145,7 +145,7 @@ static struct regmap_config vexpress_syscfg_regmap_config = {
static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
void *context)
{
struct platform_device *pdev = to_platform_device(dev);
int err;
struct vexpress_syscfg *syscfg = context;
struct vexpress_syscfg_func *func;
struct property *prop;
......@@ -155,32 +155,18 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
u32 site, position, dcc;
int i;
if (dev->of_node) {
int err = vexpress_config_get_topo(dev->of_node, &site,
err = vexpress_config_get_topo(dev->of_node, &site,
&position, &dcc);
if (err)
return ERR_PTR(err);
if (err)
return ERR_PTR(err);
prop = of_find_property(dev->of_node,
"arm,vexpress-sysreg,func", NULL);
if (!prop)
return ERR_PTR(-EINVAL);
num = prop->length / sizeof(u32) / 2;
val = prop->value;
} else {
if (pdev->num_resources != 1 ||
pdev->resource[0].flags != IORESOURCE_BUS)
return ERR_PTR(-EFAULT);
site = pdev->resource[0].start;
if (site == VEXPRESS_SITE_MASTER)
site = vexpress_config_get_master();
position = 0;
dcc = 0;
num = 1;
}
prop = of_find_property(dev->of_node,
"arm,vexpress-sysreg,func", NULL);
if (!prop)
return ERR_PTR(-EINVAL);
num = prop->length / sizeof(u32) / 2;
val = prop->value;
/*
* "arm,vexpress-energy" function used to be described
......@@ -207,13 +193,8 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
for (i = 0; i < num; i++) {
u32 function, device;
if (dev->of_node) {
function = be32_to_cpup(val++);
device = be32_to_cpup(val++);
} else {
function = pdev->resource[0].end;
device = pdev->id;
}
function = be32_to_cpup(val++);
device = be32_to_cpup(val++);
dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
func, site, position, dcc,
......@@ -265,17 +246,6 @@ static struct vexpress_config_bridge_ops vexpress_syscfg_bridge_ops = {
};
/* Non-DT hack, to be gone... */
static struct device *vexpress_syscfg_bridge;
int vexpress_syscfg_device_register(struct platform_device *pdev)
{
pdev->dev.parent = vexpress_syscfg_bridge;
return platform_device_register(pdev);
}
static int vexpress_syscfg_probe(struct platform_device *pdev)
{
struct vexpress_syscfg *syscfg;
......@@ -303,10 +273,6 @@ static int vexpress_syscfg_probe(struct platform_device *pdev)
if (IS_ERR(bridge))
return PTR_ERR(bridge);
/* Non-DT case */
if (!pdev->dev.of_node)
vexpress_syscfg_bridge = bridge;
return 0;
}
......
include/linux/vexpress.h
浏览文件 @ 81cc3f86
......@@ -15,8 +15,6 @@
#define _LINUX_VEXPRESS_H
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
#define VEXPRESS_SITE_MB 0
......@@ -24,13 +22,6 @@
#define VEXPRESS_SITE_DB2 2
#define VEXPRESS_SITE_MASTER 0xf
#define VEXPRESS_RES_FUNC(_site, _func) \
{ \
.start = (_site), \
.end = (_func), \
.flags = IORESOURCE_BUS, \
}
/* Config infrastructure */
void vexpress_config_set_master(u32 site);
......@@ -58,16 +49,6 @@ struct regmap *devm_regmap_init_vexpress_config(struct device *dev);
/* Platform control */
unsigned int vexpress_get_mci_cardin(struct device *dev);
u32 vexpress_get_procid(int site);
void *vexpress_get_24mhz_clock_base(void);
void vexpress_flags_set(u32 data);
void vexpress_sysreg_early_init(void __iomem *base);
int vexpress_syscfg_device_register(struct platform_device *pdev);
/* Clocks */
void vexpress_clk_init(void __iomem *sp810_base);
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或