ARM: S5P6440: Move common memory map definitions for S5P

1. Moved common memory map definitions for S5P such as S5P_VA_XXX
   into plat-s5p/include/mach/map-s5p.h from mach-s5p6440/include/mach.
2. Removed unnecessary definitions in the map.h and irq.c
3. Removed the unnecessary support for unaligned UART address
4. Renamed S5P_VA_VICx definitions as VA_VICx
5. Moved the definitons of VIC_BASE to plat-s5p/include/plat/irqs.h
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

arch/arm/mach-s5p6440/include/mach/debug-macro.S

@@ -22,8 +22,8 @@
 	.macro addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
-		ldreq	\rx, = S5P_PA_UART
-		ldrne	\rx, = (S5P_VA_UART + S5P_PA_UART & 0xfffff)
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
 		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif

arch/arm/mach-s5p6440/include/mach/map.h

@@ -14,94 +14,55 @@
 #define __ASM_ARCH_MAP_H __FILE__
 
 #include <plat/map-base.h>
+#include <plat/map-s5p.h>
 
-/* Chip ID */
 #define S5P6440_PA_CHIPID	(0xE0000000)
 #define S5P_PA_CHIPID		S5P6440_PA_CHIPID
-#define S5P_VA_CHIPID		S3C_ADDR(0x00700000)
 
-/* SYSCON */
 #define S5P6440_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5P6440_PA_SYSCON
-#define S5P_VA_SYSCON		S3C_VA_SYS
-
 #define S5P6440_PA_CLK		(S5P6440_PA_SYSCON + 0x0)
-#define S5P_PA_CLK		S5P6440_PA_CLK
-#define S5P_VA_CLK		(S5P_VA_SYSCON + 0x0)
+#define S5P_PA_SYSCON		S5P6440_PA_SYSCON
 
-/* GPIO */
 #define S5P6440_PA_GPIO		(0xE0308000)
 #define S5P_PA_GPIO		S5P6440_PA_GPIO
-#define S5P_VA_GPIO		S3C_ADDR(0x00500000)
 
-/* VIC0 */
 #define S5P6440_PA_VIC0		(0xE4000000)
 #define S5P_PA_VIC0		S5P6440_PA_VIC0
-#define S5P_VA_VIC0		(S3C_VA_IRQ + 0x0)
-#define VA_VIC0			S5P_VA_VIC0
 
-/* VIC1 */
 #define S5P6440_PA_VIC1		(0xE4100000)
 #define S5P_PA_VIC1		S5P6440_PA_VIC1
-#define S5P_VA_VIC1		(S3C_VA_IRQ + 0x10000)
-#define VA_VIC1			S5P_VA_VIC1
 
-/* Timer */
 #define S5P6440_PA_TIMER	(0xEA000000)
 #define S5P_PA_TIMER		S5P6440_PA_TIMER
-#define S5P_VA_TIMER		S3C_VA_TIMER
 
-/* RTC */
 #define S5P6440_PA_RTC		(0xEA100000)
 #define S5P_PA_RTC		S5P6440_PA_RTC
-#define S5P_VA_RTC		S3C_ADDR(0x00600000)
 
-/* WDT */
 #define S5P6440_PA_WDT		(0xEA200000)
 #define S5P_PA_WDT		S5P6440_PA_WDT
-#define S5p_VA_WDT		S3C_VA_WATCHDOG
 
-/* UART */
 #define S5P6440_PA_UART		(0xEC000000)
-#define S5P_PA_UART		S5P6440_PA_UART
-#define S5P_VA_UART		S3C_VA_UART
 
-/* HS USB OtG */
+#define S5P_PA_UART0		(S5P6440_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5P6440_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5P6440_PA_UART + 0x800)
+#define S5P_PA_UART3		(S5P6440_PA_UART + 0xC00)
+
+#define S5P_SZ_UART		SZ_256
+
+#define S5P6440_PA_IIC0		(0xEC104000)
+
 #define S5P6440_PA_HSOTG	(0xED100000)
 
-/* HSMMC */
 #define S5P6440_PA_HSMMC0	(0xED800000)
 #define S5P6440_PA_HSMMC1	(0xED900000)
 #define S5P6440_PA_HSMMC2	(0xEDA00000)
 
-#define S5P_PA_UART0		(S5P_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5P_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5P_PA_UART + 0x800)
-#define S5P_PA_UART3		(S5P_PA_UART + 0xC00)
-#define S5P_UART_OFFSET		(0x400)
-
-#define S5P_VA_UARTx(x)		(S5P_VA_UART + (S5P_PA_UART & 0xfffff) \
-				+ ((x) * S5P_UART_OFFSET))
-
-#define S5P_VA_UART0		S5P_VA_UARTx(0)
-#define S5P_VA_UART1		S5P_VA_UARTx(1)
-#define S5P_VA_UART2		S5P_VA_UARTx(2)
-#define S5P_VA_UART3		S5P_VA_UARTx(3)
-#define S5P_SZ_UART		SZ_256
-
-/* I2C */
-#define S5P6440_PA_IIC0		(0xEC104000)
-#define S5P_PA_IIC0		S5P6440_PA_IIC0
-#define S5p_VA_IIC0		S3C_ADDR(0x00700000)
-
-/* SDRAM */
 #define S5P6440_PA_SDRAM	(0x20000000)
 #define S5P_PA_SDRAM		S5P6440_PA_SDRAM
 
 /* compatibiltiy defines. */
-#define S3C_PA_UART		S5P_PA_UART
-#define S3C_UART_OFFSET		S5P_UART_OFFSET
-#define S3C_PA_TIMER		S5P_PA_TIMER
-#define S3C_PA_IIC		S5P_PA_IIC0
+#define S3C_PA_UART		S5P6440_PA_UART
+#define S3C_PA_IIC		S5P6440_PA_IIC0
 
 #endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-s5p6440/include/mach/regs-clock.h

@@ -15,7 +15,7 @@
 
 #include <mach/map.h>
 
-#define S5P_CLKREG(x)		(S5P_VA_CLK + (x))
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
 
 #define S5P_APLL_LOCK		S5P_CLKREG(0x00)
 #define S5P_MPLL_LOCK		S5P_CLKREG(0x04)

arch/arm/mach-s5p6440/include/mach/tick.h

@@ -15,7 +15,7 @@
 
 static inline u32 s3c24xx_ostimer_pending(void)
 {
-	u32 pend = __raw_readl(S5P_VA_VIC0 + VIC_RAW_STATUS);
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
 	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
 }
 

arch/arm/mach-s5p6440/mach-smdk6440.c

@@ -100,8 +100,8 @@ static void __init smdk6440_machine_init(void)
 
 MACHINE_START(SMDK6440, "SMDK6440")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.phys_io	= S5P_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S5P_VA_UART) >> 18) & 0xfffc,
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 
 	.init_irq	= s5p6440_init_irq,

arch/arm/plat-s5p/cpu.c

@@ -37,31 +37,34 @@ static struct cpu_table cpu_ids[] __initdata = {
 
 /* minimal IO mapping */
 
-#define UART_OFFS (S5P_PA_UART & 0xfffff)
-
 static struct map_desc s5p_iodesc[] __initdata = {
 	{
-		.virtual	= (unsigned long)S5P_VA_SYSCON,
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5P_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
 		.pfn		= __phys_to_pfn(S5P_PA_SYSCON),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)(S5P_VA_UART + UART_OFFS),
-		.pfn		= __phys_to_pfn(S5P_PA_UART),
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_VIC0,
+		.virtual	= (unsigned long)VA_VIC0,
 		.pfn		= __phys_to_pfn(S5P_PA_VIC0),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_VIC1,
+		.virtual	= (unsigned long)VA_VIC1,
 		.pfn		= __phys_to_pfn(S5P_PA_VIC1),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_TIMER,
+		.virtual	= (unsigned long)S3C_VA_TIMER,
 		.pfn		= __phys_to_pfn(S5P_PA_TIMER),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,

arch/arm/plat-s5p/include/plat/irqs.h

@@ -29,6 +29,8 @@
 #define S5P_VIC0_BASE		S5P_IRQ(0)
 #define S5P_VIC1_BASE		S5P_IRQ(32)
 
+#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
+
 #define IRQ_VIC0_BASE		S5P_VIC0_BASE
 #define IRQ_VIC1_BASE		S5P_VIC1_BASE
 

arch/arm/plat-s5p/include/plat/map-s5p.h

+/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define S5P_VA_CHIPID		S3C_ADDR(0x00700000)
+#define S5P_VA_GPIO		S3C_ADDR(0x00500000)
+#define S5P_VA_SYSTIMER		S3C_ADDR(0x01200000)
+#define S5P_VA_SROMC		S3C_ADDR(0x01100000)
+
+#define S5P_VA_UART0		(S3C_VA_UART + 0x0)
+#define S5P_VA_UART1		(S3C_VA_UART + 0x400)
+#define S5P_VA_UART2		(S3C_VA_UART + 0x800)
+#define S5P_VA_UART3		(S3C_VA_UART + 0xC00)
+
+#define S3C_UART_OFFSET		(0x400)
+
+#define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0			VA_VIC(0)
+#define VA_VIC1			VA_VIC(1)
+
+#endif /* __ASM_PLAT_MAP_S5P_H */

arch/arm/plat-s5p/irq.c

@@ -25,9 +25,6 @@
 #include <plat/irq-vic-timer.h>
 #include <plat/irq-uart.h>
 
-#define VIC_VAADDR(no)	(S5P_VA_VIC0   + ((no)*0x10000))
-#define VIC_BASE(no)	(S5P_VIC0_BASE + ((no)*32))
-
 /*
  * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
  * are consecutive when looking up the interrupt in the demux routines.
@@ -61,7 +58,7 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
 
 	/* initialize the VICs */
 	for (irq = 0; irq < num_vic; irq++)
-		vic_init(VIC_VAADDR(irq), VIC_BASE(irq), vic[irq], 0);
+		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
 
 	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
 	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);