提交 811ea256 编写于 作者: R Rajkumar Manoharan 提交者: John W. Linville

ath9k_hw: do PA offset calibration only on longcal interval

The power detector adc offset calibration has to be done
on 4 minutes interval (longcal * pa_skip_count). But the commit
"ath9k_hw: fix a noise floor calibration related race condition"
makes the PA calibration executed more frequently beased on
nfcal_pending value. Running PAOffset calibration lesser than
longcal interval doesn't help anything and the worse part is that
it causes NF load timeouts and RX deaf conditions.

In a very noisy environment, where the distance b/w AP & station
is ~10 meter and running a downlink udp traffic with frequent
background scan causes "Timeout while waiting for nf to load:
AR_PHY_AGC_CONTROL=0x40d1a" and moves the chip into deaf state.
This issue was originaly reported in Android platform where
the network-manager application does bgscan more frequently
on AR9271 chips. (AR9285 family usb device).

Cc: stable@kernel.org
Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: NRajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 dc738cb6
......@@ -679,10 +679,6 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah,
/* Do NF cal only at longer intervals */
if (longcal || nfcal_pending) {
/* Do periodic PAOffset Cal */
ar9002_hw_pa_cal(ah, false);
ar9002_hw_olc_temp_compensation(ah);
/*
* Get the value from the previous NF cal and update
* history buffer.
......@@ -697,8 +693,12 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah,
ath9k_hw_loadnf(ah, ah->curchan);
}
if (longcal)
if (longcal) {
ath9k_hw_start_nfcal(ah, false);
/* Do periodic PAOffset Cal */
ar9002_hw_pa_cal(ah, false);
ar9002_hw_olc_temp_compensation(ah);
}
}
return iscaldone;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册