ARM: mm: allow text and rodata sections to be read-only

This introduces CONFIG_DEBUG_RODATA, making kernel text and rodata
read-only. Additionally, this splits rodata from text so that rodata can
also be NX, which may lead to wasted memory when aligning to SECTION_SIZE.
The read-only areas are made writable during ftrace updates and kexec.
Signed-off-by: NKees Cook <keescook@chromium.org>
Tested-by: NLaura Abbott <lauraa@codeaurora.org>
Acked-by: NNicolas Pitre <nico@linaro.org>

arch/arm/include/asm/cacheflush.h

@@ -487,6 +487,16 @@ int set_memory_rw(unsigned long addr, int numpages);
 int set_memory_x(unsigned long addr, int numpages);
 int set_memory_nx(unsigned long addr, int numpages);
 
+#ifdef CONFIG_DEBUG_RODATA
+void mark_rodata_ro(void);
+void set_kernel_text_rw(void);
+void set_kernel_text_ro(void);
+#else
+static inline void set_kernel_text_rw(void) { }
+static inline void set_kernel_text_ro(void) { }
+#endif
+
 void flush_uprobe_xol_access(struct page *page, unsigned long uaddr,
 			     void *kaddr, unsigned long len);
+
 #endif

arch/arm/kernel/ftrace.c

@@ -15,6 +15,7 @@
 #include <linux/ftrace.h>
 #include <linux/uaccess.h>
 #include <linux/module.h>
+#include <linux/stop_machine.h>
 
 #include <asm/cacheflush.h>
 #include <asm/opcodes.h>
@@ -35,6 +36,22 @@
 
 #define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
 
+static int __ftrace_modify_code(void *data)
+{
+	int *command = data;
+
+	set_kernel_text_rw();
+	ftrace_modify_all_code(*command);
+	set_kernel_text_ro();
+
+	return 0;
+}
+
+void arch_ftrace_update_code(int command)
+{
+	stop_machine(__ftrace_modify_code, &command, NULL);
+}
+
 static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
 {
 	return rec->arch.old_mcount ? OLD_NOP : NOP;
@@ -73,6 +90,8 @@ int ftrace_arch_code_modify_prepare(void)
 int ftrace_arch_code_modify_post_process(void)
 {
 	set_all_modules_text_ro();
+	/* Make sure any TLB misses during machine stop are cleared. */
+	flush_tlb_all();
 	return 0;
 }
 

arch/arm/kernel/machine_kexec.c

@@ -164,6 +164,7 @@ void machine_kexec(struct kimage *image)
 	reboot_code_buffer = page_address(image->control_code_page);
 
 	/* Prepare parameters for reboot_code_buffer*/
+	set_kernel_text_rw();
 	kexec_start_address = image->start;
 	kexec_indirection_page = page_list;
 	kexec_mach_type = machine_arch_type;

arch/arm/kernel/vmlinux.lds.S

@@ -120,6 +120,9 @@ SECTIONS
 			ARM_CPU_KEEP(PROC_INFO)
 	}
 
+#ifdef CONFIG_DEBUG_RODATA
+	. = ALIGN(1<<SECTION_SHIFT);
+#endif
 	RO_DATA(PAGE_SIZE)
 
 	. = ALIGN(4);

arch/arm/mm/Kconfig

@@ -1017,3 +1017,15 @@ config ARM_KERNMEM_PERMS
 	  padded to section-size (1MiB) boundaries (because their permissions
 	  are different and splitting the 1M pages into 4K ones causes TLB
 	  performance problems), wasting memory.
+
+config DEBUG_RODATA
+	bool "Make kernel text and rodata read-only"
+	depends on ARM_KERNMEM_PERMS
+	default y
+	help
+	  If this is set, kernel text and rodata will be made read-only. This
+	  is to help catch accidental or malicious attempts to change the
+	  kernel's executable code. Additionally splits rodata from kernel
+	  text so it can be made explicitly non-executable. This creates
+	  another section-size padded region, so it can waste more memory
+	  space while gaining the read-only protections.

arch/arm/mm/init.c

@@ -622,9 +622,10 @@ struct section_perm {
 	unsigned long end;
 	pmdval_t mask;
 	pmdval_t prot;
+	pmdval_t clear;
 };
 
-struct section_perm nx_perms[] = {
+static struct section_perm nx_perms[] = {
 	/* Make pages tables, etc before _stext RW (set NX). */
 	{
 		.start	= PAGE_OFFSET,
@@ -639,8 +640,35 @@ struct section_perm nx_perms[] = {
 		.mask	= ~PMD_SECT_XN,
 		.prot	= PMD_SECT_XN,
 	},
+#ifdef CONFIG_DEBUG_RODATA
+	/* Make rodata NX (set RO in ro_perms below). */
+	{
+		.start  = (unsigned long)__start_rodata,
+		.end    = (unsigned long)__init_begin,
+		.mask   = ~PMD_SECT_XN,
+		.prot   = PMD_SECT_XN,
+	},
+#endif
 };
 
+#ifdef CONFIG_DEBUG_RODATA
+static struct section_perm ro_perms[] = {
+	/* Make kernel code and rodata RX (set RO). */
+	{
+		.start  = (unsigned long)_stext,
+		.end    = (unsigned long)__init_begin,
+#ifdef CONFIG_ARM_LPAE
+		.mask   = ~PMD_SECT_RDONLY,
+		.prot   = PMD_SECT_RDONLY,
+#else
+		.mask   = ~(PMD_SECT_APX | PMD_SECT_AP_WRITE),
+		.prot   = PMD_SECT_APX | PMD_SECT_AP_WRITE,
+		.clear  = PMD_SECT_AP_WRITE,
+#endif
+	},
+};
+#endif
+
 /*
  * Updates section permissions only for the current mm (sections are
  * copied into each mm). During startup, this is the init_mm. Is only
@@ -704,6 +732,24 @@ static inline void fix_kernmem_perms(void)
 {
 	set_section_perms(nx_perms, prot);
 }
+
+#ifdef CONFIG_DEBUG_RODATA
+void mark_rodata_ro(void)
+{
+	set_section_perms(ro_perms, prot);
+}
+
+void set_kernel_text_rw(void)
+{
+	set_section_perms(ro_perms, clear);
+}
+
+void set_kernel_text_ro(void)
+{
+	set_section_perms(ro_perms, prot);
+}
+#endif /* CONFIG_DEBUG_RODATA */
+
 #else
 static inline void fix_kernmem_perms(void) { }
 #endif /* CONFIG_ARM_KERNMEM_PERMS */