提交 7f62fe8a 编写于 作者: K Kai Vehmanen 提交者: Sebastian Reichel

HSI: cmt_speech: Add cmt-speech driver

Introduces the cmt-speech driver, which implements
a character device interface for transferring speech
data frames over HSI/SSI.

The driver is used to exchange voice/speech data between
the Nokia N900/N950/N9's modem and its cpu.
Signed-off-by: NKai Vehmanen <kai.vehmanen@nokia.com>
Signed-off-by: NCarlos Chinea <carlos.chinea@nokia.com>
Signed-off-by: NJoni Lapilainen <joni.lapilainen@gmail.com>

Since the original driver has been written for 2.6.28 some
build fixes and general cleanups have been added by me:

 * fix build for 4.0 kernel
 * replace GFP_ATOMIC with GFP_KERNEL in cs_alloc_cmds()
 * add sanity check for CS_SET_WAKELINE ioctl
 * cleanup driver initialisation
 * rename driver to cmt-speech to be consistent with
   ssi-protocol driver
 * move cs-protocol.h to include/uapi/linux/hsi, since
   it describes a userspace API
 * replace hardcoded channels numbers with values provided
   via the HSI framework (e.g. coming from DT)
Acked-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSebastian Reichel <sre@kernel.org>
上级 b2249129
......@@ -13,6 +13,16 @@ config NOKIA_MODEM
If unsure, say N.
config CMT_SPEECH
tristate "CMT speech"
depends on HSI && SSI_PROTOCOL
help
If you say Y here, you will enable the CMT speech protocol used
by Nokia modems. If you say M the protocol will be available as
module named cmt_speech.
If unsure, say N.
config SSI_PROTOCOL
tristate "SSI protocol"
depends on HSI && PHONET && OMAP_SSI
......
......@@ -4,4 +4,5 @@
obj-$(CONFIG_NOKIA_MODEM) += nokia-modem.o
obj-$(CONFIG_SSI_PROTOCOL) += ssi_protocol.o
obj-$(CONFIG_CMT_SPEECH) += cmt_speech.o
obj-$(CONFIG_HSI_CHAR) += hsi_char.o
此差异已折叠。
# UAPI Header export list
header-y += hsi_char.h
header-y += hsi_char.h cs-protocol.h
/*
* cmt-speech interface definitions
*
* Copyright (C) 2008,2009,2010 Nokia Corporation. All rights reserved.
*
* Contact: Kai Vehmanen <kai.vehmanen@nokia.com>
* Original author: Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#ifndef _CS_PROTOCOL_H
#define _CS_PROTOCOL_H
#include <linux/types.h>
#include <linux/ioctl.h>
/* chardev parameters */
#define CS_DEV_FILE_NAME "/dev/cmt_speech"
/* user-space API versioning */
#define CS_IF_VERSION 2
/* APE kernel <-> user space messages */
#define CS_CMD_SHIFT 28
#define CS_DOMAIN_SHIFT 24
#define CS_CMD_MASK 0xff000000
#define CS_PARAM_MASK 0xffffff
#define CS_CMD(id, dom) \
(((id) << CS_CMD_SHIFT) | ((dom) << CS_DOMAIN_SHIFT))
#define CS_ERROR CS_CMD(1, 0)
#define CS_RX_DATA_RECEIVED CS_CMD(2, 0)
#define CS_TX_DATA_READY CS_CMD(3, 0)
#define CS_TX_DATA_SENT CS_CMD(4, 0)
/* params to CS_ERROR indication */
#define CS_ERR_PEER_RESET 0
/* ioctl interface */
/* parameters to CS_CONFIG_BUFS ioctl */
#define CS_FEAT_TSTAMP_RX_CTRL (1 << 0)
#define CS_FEAT_ROLLING_RX_COUNTER (2 << 0)
/* parameters to CS_GET_STATE ioctl */
#define CS_STATE_CLOSED 0
#define CS_STATE_OPENED 1 /* resource allocated */
#define CS_STATE_CONFIGURED 2 /* data path active */
/* maximum number of TX/RX buffers */
#define CS_MAX_BUFFERS_SHIFT 4
#define CS_MAX_BUFFERS (1 << CS_MAX_BUFFERS_SHIFT)
/* Parameters for setting up the data buffers */
struct cs_buffer_config {
__u32 rx_bufs; /* number of RX buffer slots */
__u32 tx_bufs; /* number of TX buffer slots */
__u32 buf_size; /* bytes */
__u32 flags; /* see CS_FEAT_* */
__u32 reserved[4];
};
/*
* Struct describing the layout and contents of the driver mmap area.
* This information is meant as read-only information for the application.
*/
struct cs_mmap_config_block {
__u32 reserved1;
__u32 buf_size; /* 0=disabled, otherwise the transfer size */
__u32 rx_bufs; /* # of RX buffers */
__u32 tx_bufs; /* # of TX buffers */
__u32 reserved2;
/* array of offsets within the mmap area for each RX and TX buffer */
__u32 rx_offsets[CS_MAX_BUFFERS];
__u32 tx_offsets[CS_MAX_BUFFERS];
__u32 rx_ptr;
__u32 rx_ptr_boundary;
__u32 reserved3[2];
/*
* if enabled with CS_FEAT_TSTAMP_RX_CTRL, monotonic
* timestamp taken when the last control command was received
*/
struct timespec tstamp_rx_ctrl;
};
#define CS_IO_MAGIC 'C'
#define CS_IOW(num, dtype) _IOW(CS_IO_MAGIC, num, dtype)
#define CS_IOR(num, dtype) _IOR(CS_IO_MAGIC, num, dtype)
#define CS_IOWR(num, dtype) _IOWR(CS_IO_MAGIC, num, dtype)
#define CS_IO(num) _IO(CS_IO_MAGIC, num)
#define CS_GET_STATE CS_IOR(21, unsigned int)
#define CS_SET_WAKELINE CS_IOW(23, unsigned int)
#define CS_GET_IF_VERSION CS_IOR(30, unsigned int)
#define CS_CONFIG_BUFS CS_IOW(31, struct cs_buffer_config)
#endif /* _CS_PROTOCOL_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册