ARM: S5PV210: Add usb otg phy control

This patch supports to control usb otg phy of S5PV210. Based on
setup-usb-phy.c of S3C64XX.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[Test HW: GONI S5PC110]
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s5pv210/Kconfig

@@ -65,6 +65,11 @@ config S5PV210_SETUP_SPI
 	help
 	  Common setup code for SPI GPIO configurations.
 
+config S5PV210_SETUP_USB_PHY
+	bool
+	help
+	  Common setup code for USB PHY controller
+
 menu "S5PC110 Machines"
 
 config MACH_AQUILA
@@ -107,6 +112,7 @@ config MACH_GONI
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
 	select S5PV210_SETUP_FIMC
+	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210

arch/arm/mach-s5pv210/Makefile

@@ -39,3 +39,4 @@ obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
 obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_S5PV210_SETUP_SPI)		+= setup-spi.o
+obj-$(CONFIG_S5PV210_SETUP_USB_PHY) += setup-usb-phy.o

arch/arm/mach-s5pv210/include/mach/regs-sys.h

@@ -13,7 +13,3 @@
 #define S5PV210_USB_PHY_CON	(S3C_VA_SYS + 0xE80C)
 #define S5PV210_USB_PHY0_EN	(1 << 0)
 #define S5PV210_USB_PHY1_EN	(1 << 1)
-
-/* compatibility defines for s3c-hsotg driver */
-#define S3C64XX_OTHERS		S5PV210_USB_PHY_CON
-#define S3C64XX_OTHERS_USBMASK	S5PV210_USB_PHY0_EN

arch/arm/mach-s5pv210/setup-usb-phy.c

+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <mach/regs-sys.h>
+#include <plat/cpu.h>
+#include <plat/regs-usb-hsotg-phy.h>
+#include <plat/usb-phy.h>
+
+static int s5pv210_usb_otgphy_init(struct platform_device *pdev)
+{
+	struct clk *xusbxti;
+	u32 phyclk;
+
+	writel(readl(S5PV210_USB_PHY_CON) | S5PV210_USB_PHY0_EN,
+			S5PV210_USB_PHY_CON);
+
+	/* set clock frequency for PLL */
+	phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
+
+	xusbxti = clk_get(&pdev->dev, "xusbxti");
+	if (xusbxti && !IS_ERR(xusbxti)) {
+		switch (clk_get_rate(xusbxti)) {
+		case 12 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_12M;
+			break;
+		case 24 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_24M;
+			break;
+		default:
+		case 48 * MHZ:
+			/* default reference clock */
+			break;
+		}
+		clk_put(xusbxti);
+	}
+
+	/* TODO: select external clock/oscillator */
+	writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
+
+	/* set to normal OTG PHY */
+	writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
+	mdelay(1);
+
+	/* reset OTG PHY and Link */
+	writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
+			S3C_RSTCON);
+	udelay(20);	/* at-least 10uS */
+	writel(0, S3C_RSTCON);
+
+	return 0;
+}
+
+static int s5pv210_usb_otgphy_exit(struct platform_device *pdev)
+{
+	writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
+				S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
+
+	writel(readl(S5PV210_USB_PHY_CON) & ~S5PV210_USB_PHY0_EN,
+			S5PV210_USB_PHY_CON);
+
+	return 0;
+}
+
+int s5p_usb_phy_init(struct platform_device *pdev, int type)
+{
+	if (type == S5P_USB_PHY_DEVICE)
+		return s5pv210_usb_otgphy_init(pdev);
+
+	return -EINVAL;
+}
+
+int s5p_usb_phy_exit(struct platform_device *pdev, int type)
+{
+	if (type == S5P_USB_PHY_DEVICE)
+		return s5pv210_usb_otgphy_exit(pdev);
+
+	return -EINVAL;
+}