Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 7f14a787 编写于 作者: M Mike Rapoport 提交者： Eric Miao
浏览文件
操作

[ARM] pxa: add eXeda platform support 

Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
上级 4a697e83
隐藏空白更改
内联 并排
Showing with 132 addition and 21 deletion
arch/arm/mach-pxa/Kconfig
浏览文件 @ 7f14a787
......@@ -254,6 +254,10 @@ config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
config MACH_EXEDA
bool "CompuLab eXeda platform"
select PXA27x
config MACH_COLIBRI
bool "Toradex Colibri PX27x"
select PXA27x
......
arch/arm/mach-pxa/em-x270.c
浏览文件 @ 7f14a787
......@@ -11,6 +11,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
......@@ -47,18 +48,21 @@
#include "generic.h"
#include "devices.h"
/* GPIO IRQ usage */
#define GPIO41_ETHIRQ (41)
/* EM-X270 specific GPIOs */
#define GPIO13_MMC_CD (13)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
#define GPIO95_MMC_WP (95)
#define GPIO56_NAND_RB (56)
/* NAND control GPIOs */
#define GPIO11_NAND_CS (11)
#define GPIO56_NAND_RB (56)
/* eXeda specific GPIOs */
#define GPIO114_MMC_CD (114)
#define GPIO20_NAND_RB (20)
#define GPIO38_SD_PWEN (38)
/* Miscelaneous GPIOs */
/* common GPIOs */
#define GPIO11_NAND_CS (11)
#define GPIO93_CAM_RESET (93)
#define GPIO95_MMC_WP (95)
#define GPIO41_ETHIRQ (41)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
static int mmc_cd;
static int nand_rb;
......@@ -190,6 +194,12 @@ static unsigned long em_x270_pin_config[] = {
GPIO95_GPIO, /* MMC Write protect */
};
static unsigned long exeda_pin_config[] = {
GPIO20_GPIO, /* NAND Ready/Busy */
GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
GPIO114_GPIO, /* MMC card detect */
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource em_x270_dm9000_resource[] = {
[0] = {
......@@ -500,14 +510,24 @@ static int em_x270_mci_init(struct device *dev,
goto err_irq;
}
err = gpio_request(GPIO95_MMC_WP, "MMC WP");
if (err) {
dev_err(dev, "can't request MMC write protect: %d\n", err);
goto err_gpio_wp;
if (machine_is_em_x270()) {
err = gpio_request(GPIO95_MMC_WP, "MMC WP");
if (err) {
dev_err(dev, "can't request MMC write protect: %d\n",
err);
goto err_gpio_wp;
}
gpio_direction_input(GPIO95_MMC_WP);
} else {
err = gpio_request(GPIO38_SD_PWEN, "sdio power");
if (err) {
dev_err(dev, "can't request MMC power control : %d\n",
err);
goto err_gpio_wp;
}
gpio_direction_output(GPIO38_SD_PWEN, 1);
}
gpio_direction_input(GPIO95_MMC_WP);
return 0;
err_gpio_wp:
......@@ -535,6 +555,12 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
static void em_x270_mci_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(mmc_cd), data);
regulator_put(em_x270_sdio_ldo);
if (machine_is_em_x270())
gpio_free(GPIO95_MMC_WP);
else
gpio_free(GPIO38_SD_PWEN);
}
static int em_x270_mci_get_ro(struct device *dev)
......@@ -549,12 +575,14 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
MMC_VDD_30_31|MMC_VDD_31_32,
.init = em_x270_mci_init,
.setpower = em_x270_mci_setpower,
.get_ro = em_x270_mci_get_ro,
.exit = em_x270_mci_exit,
};
static void __init em_x270_init_mmc(void)
{
if (machine_is_em_x270())
em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&em_x270_mci_platform_data);
}
......@@ -651,23 +679,76 @@ static inline void em_x270_init_ac97(void) {}
#endif
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int em_x270_matrix_keys[] = {
static unsigned int em_x270_module_matrix_keys[] = {
KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
};
struct pxa27x_keypad_platform_data em_x270_keypad_info = {
struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
/* code map for the matrix keys */
.matrix_key_rows = 3,
.matrix_key_cols = 3,
.matrix_key_map = em_x270_matrix_keys,
.matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys),
.matrix_key_map = em_x270_module_matrix_keys,
.matrix_key_map_size = ARRAY_SIZE(em_x270_module_matrix_keys),
};
static unsigned int em_x270_exeda_matrix_keys[] = {
KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
KEY(7, 4, 0), KEY(7, 5, 0),
KEY(7, 6, 0), KEY(7, 7, 0),
};
struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
/* code map for the matrix keys */
.matrix_key_rows = 8,
.matrix_key_cols = 8,
.matrix_key_map = em_x270_exeda_matrix_keys,
.matrix_key_map_size = ARRAY_SIZE(em_x270_exeda_matrix_keys),
};
static void __init em_x270_init_keypad(void)
{
pxa_set_keypad_info(&em_x270_keypad_info);
if (machine_is_em_x270())
pxa_set_keypad_info(&em_x270_module_keypad_info);
else
pxa_set_keypad_info(&em_x270_exeda_keypad_info);
}
#else
static inline void em_x270_init_keypad(void) {}
......@@ -921,6 +1002,7 @@ static void __init em_x270_init_da9030(void)
static void __init em_x270_module_init(void)
{
pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
mmc_cd = GPIO13_MMC_CD;
......@@ -928,11 +1010,26 @@ static void __init em_x270_module_init(void)
dm9000_flags = DM9000_PLATF_32BITONLY;
}
static void __init em_x270_exeda_init(void)
{
pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
mmc_cd = GPIO114_MMC_CD;
nand_rb = GPIO20_NAND_RB;
dm9000_flags = DM9000_PLATF_16BITONLY;
}
static void __init em_x270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
em_x270_module_init();
if (machine_is_em_x270())
em_x270_module_init();
else if (machine_is_exeda())
em_x270_exeda_init();
else
panic("Unsupported machine: %d\n", machine_arch_type);
em_x270_init_da9030();
em_x270_init_dm9000();
......@@ -958,3 +1055,13 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_END
MACHINE_START(EXEDA, "Compulab eXeda")
.boot_params = 0xa0000100,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_END
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或