drm/nouveau/device/gm100: Basic GM206 bring up (as copy of GM204)

Enough to get VGA monitor on DVI-I output have output.
HDMI output not yet working
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c

@@ -140,6 +140,49 @@ gm100_identify(struct nvkm_device *device)
 		device->oclass[NVDEV_ENGINE_MSVLD  ] = &gk104_msvld_oclass;
 		device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass;
 		device->oclass[NVDEV_ENGINE_MSPPP  ] = &gf100_msppp_oclass;
+#endif
+		break;
+	case 0x126:
+		device->cname = "GM206";
+		device->oclass[NVDEV_SUBDEV_VBIOS  ] = &nvkm_bios_oclass;
+		device->oclass[NVDEV_SUBDEV_GPIO   ] =  gk104_gpio_oclass;
+		device->oclass[NVDEV_SUBDEV_I2C    ] =  gm204_i2c_oclass;
+		device->oclass[NVDEV_SUBDEV_FUSE   ] = &gm107_fuse_oclass;
+#if 0
+		/* looks to be some non-trivial changes */
+		device->oclass[NVDEV_SUBDEV_CLK    ] = &gk104_clk_oclass;
+		/* priv ring says no to 0x10eb14 writes */
+		device->oclass[NVDEV_SUBDEV_THERM  ] = &gm107_therm_oclass;
+#endif
+		device->oclass[NVDEV_SUBDEV_MXM    ] = &nv50_mxm_oclass;
+		device->oclass[NVDEV_SUBDEV_DEVINIT] =  gm204_devinit_oclass;
+		device->oclass[NVDEV_SUBDEV_MC     ] =  gk20a_mc_oclass;
+		device->oclass[NVDEV_SUBDEV_BUS    ] =  gf100_bus_oclass;
+		device->oclass[NVDEV_SUBDEV_TIMER  ] = &gk20a_timer_oclass;
+		device->oclass[NVDEV_SUBDEV_FB     ] =  gm107_fb_oclass;
+		device->oclass[NVDEV_SUBDEV_LTC    ] =  gm107_ltc_oclass;
+		device->oclass[NVDEV_SUBDEV_IBUS   ] = &gk104_ibus_oclass;
+		device->oclass[NVDEV_SUBDEV_INSTMEM] =  nv50_instmem_oclass;
+		device->oclass[NVDEV_SUBDEV_MMU    ] = &gf100_mmu_oclass;
+		device->oclass[NVDEV_SUBDEV_BAR    ] = &gf100_bar_oclass;
+		device->oclass[NVDEV_SUBDEV_PMU    ] =  gk208_pmu_oclass;
+#if 0
+		device->oclass[NVDEV_SUBDEV_VOLT   ] = &nv40_volt_oclass;
+#endif
+		device->oclass[NVDEV_ENGINE_DMAOBJ ] =  gf110_dmaeng_oclass;
+#if 0
+		device->oclass[NVDEV_ENGINE_FIFO   ] =  gk208_fifo_oclass;
+		device->oclass[NVDEV_ENGINE_SW     ] =  gf100_sw_oclass;
+		device->oclass[NVDEV_ENGINE_GR     ] =  gm107_gr_oclass;
+#endif
+		device->oclass[NVDEV_ENGINE_DISP   ] =  gm204_disp_oclass;
+#if 0
+		device->oclass[NVDEV_ENGINE_CE0    ] = &gm204_ce0_oclass;
+		device->oclass[NVDEV_ENGINE_CE1    ] = &gm204_ce1_oclass;
+		device->oclass[NVDEV_ENGINE_CE2    ] = &gm204_ce2_oclass;
+		device->oclass[NVDEV_ENGINE_MSVLD  ] = &gk104_msvld_oclass;
+		device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass;
+		device->oclass[NVDEV_ENGINE_MSPPP  ] = &gf100_msppp_oclass;
 #endif
 		break;
 	default: