clk: lpc32xx: add HCLK PLL output configuration

This patch add the support to setup the HCLK PLL output
using the "assigned-clock-rates" parameter in the device tree.

If the option is not use, the clock setup by the kickstart
and/or bootloader remain unchanged.

The previous kernel version did not change the clock frequency
output setup by the kickstart and/or bootloader;
this version always setup the clock frequency output to 208MHz.
Signed-off-by: NSylvain Lemieux <slemieux@tycoint.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

drivers/clk/nxp/clk-lpc32xx.c

@@ -87,7 +87,7 @@ enum {
 
 enum {
 	/* Start from the last defined clock in dt bindings */
-	LPC32XX_CLK_ADC_DIV = LPC32XX_CLK_ADC + 1,
+	LPC32XX_CLK_ADC_DIV = LPC32XX_CLK_HCLK_PLL + 1,
 	LPC32XX_CLK_ADC_RTC,
 	LPC32XX_CLK_TEST1,
 	LPC32XX_CLK_TEST2,
@@ -96,7 +96,6 @@ enum {
 	LPC32XX_CLK_OSC,
 	LPC32XX_CLK_SYS,
 	LPC32XX_CLK_PLL397X,
-	LPC32XX_CLK_HCLK_PLL,
 	LPC32XX_CLK_HCLK_DIV_PERIPH,
 	LPC32XX_CLK_HCLK_DIV,
 	LPC32XX_CLK_HCLK,
@@ -1526,9 +1525,6 @@ static void __init lpc32xx_clk_init(struct device_node *np)
 
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
-	/* For 13MHz osc valid output range of PLL is from 156MHz to 266.5MHz */
-	clk_set_rate(clk[LPC32XX_CLK_HCLK_PLL], 208000000);
-
 	/* Set 48MHz rate of USB PLL clock */
 	clk_set_rate(clk[LPC32XX_CLK_USB_PLL], 48000000);
 

include/dt-bindings/clock/lpc32xx-clock.h

@@ -47,6 +47,7 @@
 #define LPC32XX_CLK_PWM1	32
 #define LPC32XX_CLK_PWM2	33
 #define LPC32XX_CLK_ADC		34
+#define LPC32XX_CLK_HCLK_PLL	35
 
 /* LPC32XX USB clocks */
 #define LPC32XX_USB_CLK_I2C	1