V4L/DVB (12073): gspca_ov519: limit ov6630 qvif uv swap fix to ov66308AF

The fix for the UV swapping in qcif mode with the ov6630, which I did
to fix this issue on a ov518 cam with an ov66308AF, causes UV swapping in
qcif with another cam of mine with the ov518 and an ov66308AE, so this
patch changes the code to differentiate between the ov66308AF and other
ov6630 versions, and restricts the UV swap fix to the ov66308AF.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/gspca/ov519.c

@@ -77,12 +77,13 @@ struct sd {
 #define SEN_UNKNOWN 0
 #define SEN_OV6620 1
 #define SEN_OV6630 2
-#define SEN_OV7610 3
-#define SEN_OV7620 4
-#define SEN_OV7640 5
-#define SEN_OV7670 6
-#define SEN_OV76BE 7
-#define SEN_OV8610 8
+#define SEN_OV66308AF 3
+#define SEN_OV7610 4
+#define SEN_OV7620 5
+#define SEN_OV7640 6
+#define SEN_OV7670 7
+#define SEN_OV76BE 8
+#define SEN_OV8610 9
 };
 
 /* V4L2 controls supported by the driver */
@@ -1415,13 +1416,14 @@ static int ov6xx0_configure(struct sd *sd)
 		break;
 	case 0x01:
 		sd->sensor = SEN_OV6620;
+		PDEBUG(D_PROBE, "Sensor is an OV6620");
 		break;
 	case 0x02:
 		sd->sensor = SEN_OV6630;
 		PDEBUG(D_PROBE, "Sensor is an OV66308AE");
 		break;
 	case 0x03:
-		sd->sensor = SEN_OV6630;
+		sd->sensor = SEN_OV66308AF;
 		PDEBUG(D_PROBE, "Sensor is an OV66308AF");
 		break;
 	case 0x90:
@@ -1745,6 +1747,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			return -EIO;
 		break;
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
 			return -EIO;
 		break;
@@ -2081,6 +2084,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		break;
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		break;
 	default:
@@ -2101,7 +2105,8 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 
 	/* OV7640 is 8-bit only */
 
-	if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640)
+	if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV66308AF &&
+					sd->sensor != SEN_OV7640)
 		i2c_w_mask(sd, 0x13, 0x00, 0x20);
 
 	/******** Clock programming ********/
@@ -2188,15 +2193,14 @@ static int set_ov_sensor_window(struct sd *sd)
 		break;
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		hwsbase = 0x38;
 		hwebase = 0x3a;
 		vwsbase = 0x05;
 		vwebase = 0x06;
-		if (qvga) {
+		if (sd->sensor == SEN_OV66308AF && qvga)
 			/* HDG: this fixes U and V getting swapped */
-			hwsbase--;
-			vwsbase--;
-		}
+			hwsbase++;
 		break;
 	case SEN_OV7620:
 		hwsbase = 0x2f;		/* From 7620.SET (spec is wrong) */
@@ -2220,6 +2224,7 @@ static int set_ov_sensor_window(struct sd *sd)
 	switch (sd->sensor) {
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		if (qvga) {		/* QCIF */
 			hwscale = 0;
 			vwscale = 0;
@@ -2456,6 +2461,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 	case SEN_OV76BE:
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 	case SEN_OV7640:
 		i2c_w(sd, OV7610_REG_BRT, val);
 		break;
@@ -2484,6 +2490,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		i2c_w(sd, OV7610_REG_CNT, val);
 		break;
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f);
 		break;
 	case SEN_OV8610: {
@@ -2528,6 +2535,7 @@ static void setcolors(struct gspca_dev *gspca_dev)
 	case SEN_OV76BE:
 	case SEN_OV6620:
 	case SEN_OV6630:
+	case SEN_OV66308AF:
 		i2c_w(sd, OV7610_REG_SAT, val);
 		break;
 	case SEN_OV7620:
@@ -2591,7 +2599,8 @@ static void setfreq(struct sd *sd)
 			i2c_w_mask(sd, 0x2a, 0x80, 0x80);
 			/* 20 fps -> 16.667 fps */
 			if (sd->sensor == SEN_OV6620 ||
-			    sd->sensor == SEN_OV6630)
+			    sd->sensor == SEN_OV6630 ||
+			    sd->sensor == SEN_OV66308AF)
 				i2c_w(sd, 0x2b, 0x5e);
 			else
 				i2c_w(sd, 0x2b, 0xac);
@@ -2599,7 +2608,8 @@ static void setfreq(struct sd *sd)
 		case 2: /* 60 hz (filter on, ...) */
 			i2c_w_mask(sd, 0x2d, 0x04, 0x04);
 			if (sd->sensor == SEN_OV6620 ||
-			    sd->sensor == SEN_OV6630) {
+			    sd->sensor == SEN_OV6630 ||
+			    sd->sensor == SEN_OV66308AF) {
 				/* 20 fps -> 15 fps */
 				i2c_w_mask(sd, 0x2a, 0x80, 0x80);
 				i2c_w(sd, 0x2b, 0xa8);