Merge tag 'amlogic-dt' of...

Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic 32-bit DT updates for v4.18
- add support for meson8m2 SoC
- new board: Tronsmart MXIII Plus using meson8m2 SoC
- odroid-c1: add IR

* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus
  ARM: dts: meson8: add the uart_A pins
  ARM: dts: meson: add support for the Meson8m2 SoC
  ARM: meson: add support for the Meson8m2 SoCs
  ARM: dts: meson8b: odroid-c1: enable the IR receiver
  ARM: dts: meson8b: odroid-c1: sort nodes alphabetically
  ARM: dts: meson8b: add the cortex-a5-pmu compatible PMU
  ARM: dts: meson8: add the cortex-a9-pmu compatible PMU
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -313,7 +313,8 @@ dtb-$(CONFIG_ARCH_NPCM7XX) += \
 dtb-$(CONFIG_MACH_MESON6) += \
 	meson6-atv1200.dtb
 dtb-$(CONFIG_MACH_MESON8) += \
-	meson8-minix-neo-x8.dtb
+	meson8-minix-neo-x8.dtb \
+	meson8m2-mxiii-plus.dtb
 dtb-$(CONFIG_ARCH_MMP) += \
 	pxa168-aspenite.dtb \
 	pxa910-dkb.dtb \

arch/arm/boot/dts/meson8.dtsi

@@ -57,7 +57,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@200 {
+		cpu0: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
@@ -66,7 +66,7 @@
 			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
 		};
 
-		cpu@201 {
+		cpu1: cpu@201 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
@@ -75,7 +75,7 @@
 			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
 		};
 
-		cpu@202 {
+		cpu2: cpu@202 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
@@ -84,7 +84,7 @@
 			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
 		};
 
-		cpu@203 {
+		cpu3: cpu@203 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
@@ -94,6 +94,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	reserved-memory {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -272,6 +281,22 @@
 				function = "pwm_e";
 			};
 		};
+
+		uart_a1_pins: uart-a1 {
+			mux {
+				groups = "uart_tx_a1",
+				       "uart_rx_a1";
+				function = "uart_a";
+			};
+		};
+
+		uart_a1_cts_rts_pins: uart-a1-cts-rts {
+			mux {
+				groups = "uart_cts_a1",
+				       "uart_rts_a1";
+				function = "uart_a";
+			};
+		};
 	};
 };
 

arch/arm/boot/dts/meson8b-odroidc1.dts

@@ -103,10 +103,34 @@
 	};
 };
 
-&uart_AO {
+&ethmac {
 	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
+
+	snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+
+	pinctrl-0 = <&eth_rgmii_pins>;
 	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	phy-handle = <&eth_phy>;
+	amlogic,tx-delay-ns = <4>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Realtek RTL8211F (0x001cc916) */
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+			eee-broken-1000t;
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
 };
 
 &gpio_ao {
@@ -124,12 +148,10 @@
 	};
 };
 
-&usb1_phy {
-	status = "okay";
-};
-
-&usb1 {
+&ir_receiver {
 	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
 };
 
 &sdio {
@@ -158,32 +180,16 @@
 	};
 };
 
-&ethmac {
+&uart_AO {
 	status = "okay";
-
-	snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 30000>;
-
-	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
+};
 
-	phy-mode = "rgmii";
-	phy-handle = <&eth_phy>;
-	amlogic,tx-delay-ns = <4>;
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
+&usb1_phy {
+	status = "okay";
+};
 
-		/* Realtek RTL8211F (0x001cc916) */
-		eth_phy: ethernet-phy@0 {
-			reg = <0>;
-			eee-broken-1000t;
-			interrupt-parent = <&gpio_intc>;
-			/* GPIOH_3 */
-			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
+&usb1 {
+	status = "okay";
 };

arch/arm/boot/dts/meson8b.dtsi

@@ -55,7 +55,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@200 {
+		cpu0: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			next-level-cache = <&L2>;
@@ -64,7 +64,7 @@
 			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
 		};
 
-		cpu@201 {
+		cpu1: cpu@201 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			next-level-cache = <&L2>;
@@ -73,7 +73,7 @@
 			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
 		};
 
-		cpu@202 {
+		cpu2: cpu@202 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			next-level-cache = <&L2>;
@@ -82,7 +82,7 @@
 			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
 		};
 
-		cpu@203 {
+		cpu3: cpu@203 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			next-level-cache = <&L2>;
@@ -92,6 +92,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	reserved-memory {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -139,6 +148,13 @@
 				function = "uart_ao";
 			};
 		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+			};
+		};
 	};
 };
 

arch/arm/boot/dts/meson8m2-mxiii-plus.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru>
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+/dts-v1/;
+
+#include "meson8m2.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Tronsmart MXIII Plus";
+	compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c_AO;
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+		mmc0 = &sd_card_slot;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <4>;
+
+	snps,reset-gpio = <&gpio GPIOH_4 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+		};
+	};
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC2 {
+				regulator-name = "VDDAO";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddio_ao1v8: LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "VCC1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+/* connected to the Bluetooth module */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};

arch/arm/boot/dts/meson8m2.dtsi

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Amlogic Meson8m2 SoC";
+	compatible = "amlogic,meson8m2";
+}; /* end of / */
+
+&clkc {
+	compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc";
+};
+
+&ethmac {
+	compatible = "amlogic,meson8m2-dwmac", "snps,dwmac";
+	reg = <0xc9410000 0x10000
+		0xc1108140 0x8>;
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1";
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+};
+
+&pinctrl_aobus {
+	compatible = "amlogic,meson8m2-aobus-pinctrl",
+		     "amlogic,meson8-aobus-pinctrl";
+};
+
+&pinctrl_cbus {
+	compatible = "amlogic,meson8m2-cbus-pinctrl",
+		     "amlogic,meson8-cbus-pinctrl";
+
+	eth_rgmii_pins: ethernet {
+		mux {
+			groups = "eth_tx_clk_50m", "eth_tx_en",
+				 "eth_txd3", "eth_txd2",
+				 "eth_txd1", "eth_txd0",
+				 "eth_rx_clk_in", "eth_rx_dv",
+				 "eth_rxd3", "eth_rxd2",
+				 "eth_rxd1", "eth_rxd0",
+				 "eth_mdio", "eth_mdc";
+			function = "ethernet";
+		};
+	};
+};
+
+&wdt {
+	compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
+};

arch/arm/mach-meson/Kconfig

@@ -19,7 +19,7 @@ config MACH_MESON6
 	select MESON6_TIMER
 
 config MACH_MESON8
-	bool "Amlogic Meson8 SoCs support"
+	bool "Amlogic Meson8 and Meson8m2 SoCs support"
 	default ARCH_MESON
 	select MESON6_TIMER
 	select COMMON_CLK_MESON8B

arch/arm/mach-meson/meson.c

@@ -20,6 +20,7 @@ static const char * const meson_common_board_compat[] = {
 	"amlogic,meson6",
 	"amlogic,meson8",
 	"amlogic,meson8b",
+	"amlogic,meson8m2",
 	NULL,
 };