ARM: ux500: Change IRQ from low-to-high edge triggered to high-to-low

When the STMPE IRQ is triggered to be active high level-sensitive, the
Nomadik GPIO controller it uses complains, although it still works.
Recently we attempted to move triggering to low-to-high in an attempt
to prevent the warning; however, this ensured that the IRQ was actually
missed completely. Now we have a solution which both works and keeps the
GPIO controller happy.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/stuib.dtsi

@@ -15,7 +15,7 @@
 			stmpe1601: stmpe1601@40 {
 				compatible = "st,stmpe1601";
 				reg = <0x40>;
-				interrupts = <26 0x1>;
+				interrupts = <26 0x2>;
 				interrupt-parent = <&gpio6>;
 				interrupt-controller;