提交 7cdfa4a3 编写于 作者: M Marius B. Kotsbak 提交者: David S. Miller

net/usb: kalmia: Various fixes for better support of non-x86 architectures.

-Support for big endian.
-Do not use USB buffers at the stack.
-Safer/more efficient code for local constants.
Signed-off-by: NMarius B. Kotsbak <marius@kotsbak.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 9cfaa8de
......@@ -100,27 +100,35 @@ kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len,
static int
kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
{
char init_msg_1[] =
const static char init_msg_1[] =
{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
0x00, 0x00 };
char init_msg_2[] =
const static char init_msg_2[] =
{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
0x00, 0x00 };
char receive_buf[28];
const static int buflen = 28;
char *usb_buf;
int status;
status = kalmia_send_init_packet(dev, init_msg_1, sizeof(init_msg_1)
/ sizeof(init_msg_1[0]), receive_buf, 24);
usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL);
if (!usb_buf)
return -ENOMEM;
memcpy(usb_buf, init_msg_1, 12);
status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1)
/ sizeof(init_msg_1[0]), usb_buf, 24);
if (status != 0)
return status;
status = kalmia_send_init_packet(dev, init_msg_2, sizeof(init_msg_2)
/ sizeof(init_msg_2[0]), receive_buf, 28);
memcpy(usb_buf, init_msg_2, 12);
status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2)
/ sizeof(init_msg_2[0]), usb_buf, 28);
if (status != 0)
return status;
memcpy(ethernet_addr, receive_buf + 10, ETH_ALEN);
memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN);
kfree(usb_buf);
return status;
}
......@@ -190,7 +198,8 @@ kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
dev_kfree_skb_any(skb);
skb = skb2;
done: header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
done:
header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];
......@@ -201,9 +210,8 @@ kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
header_start[0] = 0x57;
header_start[1] = 0x44;
content_len = skb->len - KALMIA_HEADER_LENGTH;
header_start[2] = (content_len & 0xff); /* low byte */
header_start[3] = (content_len >> 8); /* high byte */
put_unaligned_le16(content_len, &header_start[2]);
header_start[4] = ether_type_1;
header_start[5] = ether_type_2;
......@@ -231,13 +239,13 @@ kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
* Our task here is to strip off framing, leaving skb with one
* data frame for the usbnet framework code to process.
*/
const u8 HEADER_END_OF_USB_PACKET[] =
const static u8 HEADER_END_OF_USB_PACKET[] =
{ 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
const u8 EXPECTED_UNKNOWN_HEADER_1[] =
const static u8 EXPECTED_UNKNOWN_HEADER_1[] =
{ 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
const u8 EXPECTED_UNKNOWN_HEADER_2[] =
const static u8 EXPECTED_UNKNOWN_HEADER_2[] =
{ 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
u8 i = 0;
int i = 0;
/* incomplete header? */
if (skb->len < KALMIA_HEADER_LENGTH)
......@@ -285,7 +293,7 @@ kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
/* subtract start header and end header */
usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
ether_packet_length = header_start[2] + (header_start[3] << 8);
ether_packet_length = get_unaligned_le16(&header_start[2]);
skb_pull(skb, KALMIA_HEADER_LENGTH);
/* Some small packets misses end marker */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册