提交 7c247645 编写于 作者: C Corentin Chary

asus-laptop: move backlight and dsdt info inside asus_laptop struct

Prepare the use of "driver data" for callbacks.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
上级 50a90c4d
......@@ -202,30 +202,24 @@ ASUS_HANDLE(kled_get, ASUS_LAPTOP_PREFIX "GLKB");
struct asus_laptop {
char *name; /* laptop name */
struct acpi_table_header *dsdt_info;
struct platform_device *platform_device;
struct acpi_device *device; /* the device we are in */
struct acpi_device *device; /* the device we are in */
struct backlight_device *backlight_device;
struct input_dev *inputdev;
acpi_handle handle; /* the handle of the hotk device */
char status; /* status of the hotk, for LEDs, ... */
u32 ledd_status; /* status of the LED display */
u8 light_level; /* light sensor level */
u8 light_switch; /* light sensor switch value */
u16 event_count[128]; /* count for each event TODO make this better */
struct input_dev *inputdev;
u16 *keycode_map;
};
/*
* This header is made available to allow proper configuration given model,
* revision number , ... this info cannot go in struct asus_laptop because it is
* available before the hotk
*/
static struct acpi_table_header *asus_info;
/* The actual device the driver binds to */
static struct asus_laptop *asus;
/* The backlight device /sys/class/backlight */
static struct backlight_device *asus_backlight_device;
static struct workqueue_struct *led_workqueue;
/*
* The backlight class declaration
......@@ -237,14 +231,6 @@ static struct backlight_ops asusbl_ops = {
.update_status = update_bl_status,
};
/*
* These functions actually update the LED's, and are called from a
* workqueue. By doing this as separate work rather than when the LED
* subsystem asks, we avoid messing with the Asus ACPI stuff during a
* potentially bad time, such as a timer interrupt.
*/
static struct workqueue_struct *led_workqueue;
#define ASUS_LED(object, ledname, max) \
static void object##_led_set(struct led_classdev *led_cdev, \
enum led_brightness value); \
......@@ -522,7 +508,7 @@ static int set_lcd_state(int value)
static void lcd_blank(int blank)
{
struct backlight_device *bd = asus_backlight_device;
struct backlight_device *bd = asus->backlight_device;
if (bd) {
bd->props.power = blank;
......@@ -619,22 +605,22 @@ static ssize_t show_infos(struct device *dev,
if (!ACPI_FAILURE(rv))
len += sprintf(page + len, "ASYM value : %#x\n",
(uint) temp);
if (asus_info) {
snprintf(buf, 16, "%d", asus_info->length);
if (asus->dsdt_info) {
snprintf(buf, 16, "%d", asus->dsdt_info->length);
len += sprintf(page + len, "DSDT length : %s\n", buf);
snprintf(buf, 16, "%d", asus_info->checksum);
snprintf(buf, 16, "%d", asus->dsdt_info->checksum);
len += sprintf(page + len, "DSDT checksum : %s\n", buf);
snprintf(buf, 16, "%d", asus_info->revision);
snprintf(buf, 16, "%d", asus->dsdt_info->revision);
len += sprintf(page + len, "DSDT revision : %s\n", buf);
snprintf(buf, 7, "%s", asus_info->oem_id);
snprintf(buf, 7, "%s", asus->dsdt_info->oem_id);
len += sprintf(page + len, "OEM id : %s\n", buf);
snprintf(buf, 9, "%s", asus_info->oem_table_id);
snprintf(buf, 9, "%s", asus->dsdt_info->oem_table_id);
len += sprintf(page + len, "OEM table id : %s\n", buf);
snprintf(buf, 16, "%x", asus_info->oem_revision);
snprintf(buf, 16, "%x", asus->dsdt_info->oem_revision);
len += sprintf(page + len, "OEM revision : 0x%s\n", buf);
snprintf(buf, 5, "%s", asus_info->asl_compiler_id);
snprintf(buf, 5, "%s", asus->dsdt_info->asl_compiler_id);
len += sprintf(page + len, "ASL comp vendor id : %s\n", buf);
snprintf(buf, 16, "%x", asus_info->asl_compiler_revision);
snprintf(buf, 16, "%x", asus->dsdt_info->asl_compiler_revision);
len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf);
}
......@@ -1084,7 +1070,7 @@ static int asus_handle_init(char *name, acpi_handle * handle,
* method, we can make all the detection we want, and modify the asus_laptop
* struct
*/
static int asus_laptop_get_info(void)
static int asus_laptop_get_info(struct asus_laptop *asus)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *model = NULL;
......@@ -1097,10 +1083,9 @@ static int asus_laptop_get_info(void)
* models, but late enough to allow acpi_bus_register_driver() to fail
* before doing anything ACPI-specific. Should we encounter a machine,
* which needs special handling (i.e. its hotkey device has a different
* HID), this bit will be moved. A global variable asus_info contains
* the DSDT header.
* HID), this bit will be moved.
*/
status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus->dsdt_info);
if (ACPI_FAILURE(status))
pr_warning("Couldn't get the DSDT table header\n");
......@@ -1237,8 +1222,8 @@ static int asus_input_init(struct device *dev)
static void asus_backlight_exit(void)
{
if (asus_backlight_device)
backlight_device_unregister(asus_backlight_device);
if (asus->backlight_device)
backlight_device_unregister(asus->backlight_device);
}
#define ASUS_LED_UNREGISTER(object) \
......@@ -1271,11 +1256,11 @@ static int asus_backlight_init(struct device *dev)
NULL, &asusbl_ops);
if (IS_ERR(bd)) {
pr_err("Could not register asus backlight device\n");
asus_backlight_device = NULL;
asus->backlight_device = NULL;
return PTR_ERR(bd);
}
asus_backlight_device = bd;
asus->backlight_device = bd;
bd->props.max_brightness = 15;
bd->props.brightness = read_brightness(NULL);
......@@ -1326,6 +1311,12 @@ static int asus_led_init(struct device *dev)
if (rv)
goto out5;
/*
* Functions that actually update the LED's are called from a
* workqueue. By doing this as separate work rather than when the LED
* subsystem asks, we avoid messing with the Asus ACPI stuff during a
* potentially bad time, such as a timer interrupt.
*/
led_workqueue = create_singlethread_workqueue("led_workqueue");
if (!led_workqueue)
goto out6;
......@@ -1363,7 +1354,7 @@ static int __devinit asus_acpi_init(struct acpi_device *device)
return -ENODEV;
}
result = asus_laptop_get_info();
result = asus_laptop_get_info(asus);
if (result)
return result;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册