提交 7b6d0b6a 编写于 作者: G Guenter Roeck 提交者: Wim Van Sebroeck

watchdog: w83627hf: Add support for W83697HF and W83697UG

Major difference is that the watchdog control and counter registers
are different on both chips.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
上级 962c04f5
......@@ -902,6 +902,8 @@ config W83627HF_WDT
W83637HF
W83667HG/HG-B
W83687THF
W83697HF
W83697UG
NCT6775
NCT6776
NCT6779
......
......@@ -45,10 +45,12 @@
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
static int wdt_io;
static int cr_wdt_timeout; /* WDT timeout register */
static int cr_wdt_control; /* WDT control register */
enum chips { w83627hf, w83627s, w83637hf, w83627thf, w83687thf,
w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p, w83667hg_b,
nct6775, nct6776, nct6779 };
enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
w83667hg_b, nct6775, nct6776, nct6779 };
static int timeout; /* in seconds */
module_param(timeout, int, 0);
......@@ -75,6 +77,8 @@ MODULE_PARM_DESC(nowayout,
#define W83627HF_ID 0x52
#define W83627S_ID 0x59
#define W83697HF_ID 0x60
#define W83697UG_ID 0x68
#define W83637HF_ID 0x70
#define W83627THF_ID 0x82
#define W83687THF_ID 0x85
......@@ -88,6 +92,12 @@ MODULE_PARM_DESC(nowayout,
#define NCT6776_ID 0xc3
#define NCT6779_ID 0xc5
#define W83627HF_WDT_TIMEOUT 0xf6
#define W83697HF_WDT_TIMEOUT 0xf4
#define W83627HF_WDT_CONTROL 0xf5
#define W83697HF_WDT_CONTROL 0xf3
static void superio_outb(int reg, int val)
{
outb(reg, WDT_EFER);
......@@ -144,6 +154,17 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
t = superio_inb(0x2B) & ~0x10;
superio_outb(0x2B, t); /* set GPIO24 to WDT0 */
break;
case w83697hf:
/* Set pin 119 to WDTO# mode (= CR29, WDT0) */
t = superio_inb(0x29) & ~0x60;
t |= 0x20;
superio_outb(0x29, t);
break;
case w83697ug:
/* Set pin 118 to WDTO# mode */
t = superio_inb(0x2b) & ~0x04;
superio_outb(0x2b, t);
break;
case w83627thf:
t = (superio_inb(0x2B) & ~0x08) | 0x04;
superio_outb(0x2B, t); /* set GPIO3 to WDT0 */
......@@ -152,10 +173,10 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
case w83627dhg_p:
t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */
superio_outb(0x2D, t); /* set GPIO5 to WDT0 */
t = superio_inb(0xF5);
t = superio_inb(cr_wdt_control);
t |= 0x02; /* enable the WDTO# output low pulse
* to the KBRST# pin */
superio_outb(0xF5, t);
superio_outb(cr_wdt_control, t);
break;
case w83637hf:
break;
......@@ -176,25 +197,25 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
* Don't touch its configuration, and hope the BIOS
* does the right thing.
*/
t = superio_inb(0xF5);
t = superio_inb(cr_wdt_control);
t |= 0x02; /* enable the WDTO# output low pulse
* to the KBRST# pin */
superio_outb(0xF5, t);
superio_outb(cr_wdt_control, t);
break;
default:
break;
}
t = superio_inb(0xF6);
t = superio_inb(cr_wdt_timeout);
if (t != 0) {
pr_info("Watchdog already running. Resetting timeout to %d sec\n",
wdog->timeout);
superio_outb(0xF6, wdog->timeout);
superio_outb(cr_wdt_timeout, wdog->timeout);
}
/* set second mode & disable keyboard turning off watchdog */
t = superio_inb(0xF5) & ~0x0C;
superio_outb(0xF5, t);
t = superio_inb(cr_wdt_control) & ~0x0C;
superio_outb(cr_wdt_control, t);
/* disable keyboard & mouse turning off watchdog */
t = superio_inb(0xF7) & ~0xC0;
......@@ -214,7 +235,7 @@ static int wdt_set_time(unsigned int timeout)
return ret;
superio_select(W83627HF_LD_WDT);
superio_outb(0xF6, timeout);
superio_outb(cr_wdt_timeout, timeout);
superio_exit();
return 0;
......@@ -247,7 +268,7 @@ static unsigned int wdt_get_time(struct watchdog_device *wdog)
return 0;
superio_select(W83627HF_LD_WDT);
timeleft = superio_inb(0xF6);
timeleft = superio_inb(cr_wdt_timeout);
superio_exit();
return timeleft;
......@@ -304,6 +325,9 @@ static int wdt_find(int addr)
u8 val;
int ret;
cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
cr_wdt_control = W83627HF_WDT_CONTROL;
ret = superio_enter();
if (ret)
return ret;
......@@ -316,6 +340,16 @@ static int wdt_find(int addr)
case W83627S_ID:
ret = w83627s;
break;
case W83697HF_ID:
ret = w83697hf;
cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
cr_wdt_control = W83697HF_WDT_CONTROL;
break;
case W83697UG_ID:
ret = w83697ug;
cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
cr_wdt_control = W83697HF_WDT_CONTROL;
break;
case W83637HF_ID:
ret = w83637hf;
break;
......@@ -371,6 +405,8 @@ static int __init wdt_init(void)
const char * const chip_name[] = {
"W83627HF",
"W83627S",
"W83697HF",
"W83697UG",
"W83637HF",
"W83627THF",
"W83687THF",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册