Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID subsystem updates from Jiri Kosina:

 - The need for HID_QUIRK_NO_INIT_REPORTS per-device quirk has been
   growing dramatically during past years, so the time has come to
   switch over the default, and perform the pro-active reading only in
   cases where it's really needed (multitouch, wacom).

   The only place where this behavior is (in some form) preserved is
   hiddev so that we don't introduce userspace-visible change of
   behavior.

   From Benjamin Tissoires

 - HID++ support for power_supply / baterry reporting.

   From Benjamin Tissoires and Bastien Nocera

 - Vast improvements / rework of DS3 and DS4 in Sony driver.

   From Roderick Colenbrander

 - Improvment (in terms of getting closer to the Microsoft's
   interpretation of slightly ambiguous specification) of logical range
   interpretation in case null-state is set in the rdesc.

   From Valtteri Heikkilä and Tomasz Kramkowski

 - A lot of newly supported device IDs and small assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (71 commits)
  HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch
  HID: asus: support backlight on USB keyboards
  HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq
  HID: wacom: generic: sync pad events only for actual packets
  HID: sony: remove redundant check for -ve err
  HID: sony: Make sure to unregister sensors on failure
  HID: sony: Make DS4 bt poll interval adjustable
  HID: sony: Set proper bit flags on DS4 output report
  HID: sony: DS4 use brighter LED colors
  HID: sony: Improve navigation controller axis/button mapping
  HID: sony: Use DS3 MAC address as unique identifier on USB
  HID: logitech-hidpp: add a sysfs file to tell we support power_supply
  HID: logitech-hidpp: enable HID++ 1.0 battery reporting
  HID: logitech-hidpp: add support for battery status for the K750
  HID: logitech-hidpp: battery: provide CAPACITY_LEVEL
  HID: logitech-hidpp: rename battery level into capacity
  HID: logitech-hidpp: battery: provide ONLINE property
  HID: logitech-hidpp: notify battery on connect
  HID: logitech-hidpp: return an error if the queried feature is not present
  HID: logitech-hidpp: create the battery for all types of HID++ devices
  ...

Documentation/admin-guide/kernel-parameters.txt

@@ -4127,6 +4127,9 @@
 	usbhid.mousepoll=
 			[USBHID] The interval which mice are to be polled at.
 
+	usbhid.jspoll=
+			[USBHID] The interval which joysticks are to be polled at.
+
 	usb-storage.delay_use=
 			[UMS] The delay in seconds before a new device is
 			scanned for Logical Units (default 1).

Documentation/devicetree/bindings/input/hid-over-i2c.txt

@@ -17,6 +17,22 @@ Required properties:
 - interrupt-parent: the phandle for the interrupt controller
 - interrupts: interrupt line
 
+Additional optional properties:
+
+Some devices may support additional optional properties to help with, e.g.,
+power sequencing. The following properties can be supported by one or more
+device-specific compatible properties, which should be used in addition to the
+"hid-over-i2c" string.
+
+- compatible:
+  * "wacom,w9013" (Wacom W9013 digitizer). Supports:
+    - vdd-supply
+    - post-power-on-delay-ms
+
+- vdd-supply: phandle of the regulator that provides the supply voltage.
+- post-power-on-delay-ms: time required by the device after enabling its regulators
+  before it is ready for communication. Must be used with 'vdd-supply'.
+
 Example:
 
 	i2c-hid-dev@2c {

Documentation/input/event-codes.txt

@@ -301,7 +301,10 @@ them as any other INPUT_PROP_BUTTONPAD device.
 INPUT_PROP_ACCELEROMETER
 -------------------------
 Directional axes on this device (absolute and/or relative x, y, z) represent
-accelerometer data. All other axes retain their meaning. A device must not mix
+accelerometer data. Some devices also report gyroscope data, which devices
+can report through the rotational axes (absolute and/or relative rx, ry, rz).
+
+All other axes retain their meaning. A device must not mix
 regular directional axes and accelerometer axes on the same event node.
 
 Guidelines:

drivers/hid/Kconfig

@@ -98,6 +98,18 @@ config HID_A4TECH
 	---help---
 	Support for A4 tech X5 and WOP-35 / Trust 450L mice.
 
+config HID_ACCUTOUCH
+	tristate "Accutouch touch device"
+	depends on USB_HID
+	---help---
+	  This selects a driver for the Accutouch 2216 touch controller.
+
+	  The driver works around a problem in the reported device capabilities
+	  which causes userspace to detect the device as a mouse rather than
+          a touchscreen.
+
+	  Say Y here if you have a Accutouch 2216 touch controller.
+
 config HID_ACRUX
 	tristate "ACRUX game controller support"
 	depends on HID
@@ -136,13 +148,16 @@ config HID_APPLEIR
 
 config HID_ASUS
 	tristate "Asus"
-	depends on I2C_HID
+	depends on LEDS_CLASS
 	---help---
-	Support for Asus notebook built-in keyboard and touchpad via i2c.
+	Support for Asus notebook built-in keyboard and touchpad via i2c, and
+	the Asus Republic of Gamers laptop keyboard special keys.
 
 	Supported devices:
 	- EeeBook X205TA
 	- VivoBook E200HA
+	- GL553V series
+	- GL753V series
 
 config HID_AUREAL
 	tristate "Aureal"
@@ -215,7 +230,8 @@ config HID_CMEDIA
 
 config HID_CP2112
 	tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
-	depends on USB_HID && I2C && GPIOLIB && GPIOLIB_IRQCHIP
+	depends on USB_HID && I2C && GPIOLIB
+	select GPIOLIB_IRQCHIP
 	---help---
 	Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
 	This is a HID device driver which registers as an i2c adapter
@@ -441,6 +457,7 @@ config HID_LOGITECH_DJ
 config HID_LOGITECH_HIDPP
 	tristate "Logitech HID++ devices support"
 	depends on HID_LOGITECH
+	select POWER_SUPPLY
 	---help---
 	Support for Logitech devices relyingon the HID++ Logitech specification
 
@@ -581,6 +598,12 @@ config HID_MULTITOUCH
 	  To compile this driver as a module, choose M here: the
 	  module will be called hid-multitouch.
 
+config HID_NTI
+	tristate "NTI keyboard adapters"
+	---help---
+	Support for the "extra" Sun keyboard keys on keyboards attached
+	through Network Technologies USB-SUN keyboard adapters.
+
 config HID_NTRIG
 	tristate "N-Trig touch screen"
 	depends on USB_HID

drivers/hid/Makefile

@@ -21,6 +21,7 @@ hid-wiimote-y		:= hid-wiimote-core.o hid-wiimote-modules.o
 hid-wiimote-$(CONFIG_DEBUG_FS)	+= hid-wiimote-debug.o
 
 obj-$(CONFIG_HID_A4TECH)	+= hid-a4tech.o
+obj-$(CONFIG_HID_ACCUTOUCH)	+= hid-accutouch.o
 obj-$(CONFIG_HID_ALPS)		+= hid-alps.o
 obj-$(CONFIG_HID_ACRUX)		+= hid-axff.o
 obj-$(CONFIG_HID_APPLE)		+= hid-apple.o
@@ -62,6 +63,7 @@ obj-$(CONFIG_HID_MAYFLASH)	+= hid-mf.o
 obj-$(CONFIG_HID_MICROSOFT)	+= hid-microsoft.o
 obj-$(CONFIG_HID_MONTEREY)	+= hid-monterey.o
 obj-$(CONFIG_HID_MULTITOUCH)	+= hid-multitouch.o
+obj-$(CONFIG_HID_NTI)			+= hid-nti.o
 obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
 obj-$(CONFIG_HID_ORTEK)		+= hid-ortek.o
 obj-$(CONFIG_HID_PRODIKEYS)	+= hid-prodikeys.o

drivers/hid/hid-accutouch.c

+/*
+ * HID driver for Elo Accutouch touchscreens
+ *
+ * Copyright (c) 2016, Collabora Ltd.
+ * Copyright (c) 2016, General Electric Company
+ *
+ * based on hid-penmount.c
+ *  Copyright (c) 2014 Christian Gmeiner <christian.gmeiner <at> gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/hid.h>
+#include <linux/module.h>
+#include "hid-ids.h"
+
+static int accutouch_input_mapping(struct hid_device *hdev,
+				   struct hid_input *hi,
+				   struct hid_field *field,
+				   struct hid_usage *usage,
+				   unsigned long **bit, int *max)
+{
+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) {
+		hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+		return 1;
+	}
+
+	return 0;
+}
+
+static const struct hid_device_id accutouch_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_ACCUTOUCH_2216) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, accutouch_devices);
+
+static struct hid_driver accutouch_driver = {
+	.name = "hid-accutouch",
+	.id_table = accutouch_devices,
+	.input_mapping = accutouch_input_mapping,
+};
+
+module_hid_driver(accutouch_driver);
+
+MODULE_AUTHOR("Martyn Welch <martyn.welch@collabora.co.uk");
+MODULE_DESCRIPTION("Elo Accutouch HID TouchScreen driver");
+MODULE_LICENSE("GPL");

drivers/hid/hid-asus.c

@@ -40,8 +40,12 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
 
 #define FEATURE_REPORT_ID 0x0d
 #define INPUT_REPORT_ID 0x5d
+#define FEATURE_KBD_REPORT_ID 0x5a
 
 #define INPUT_REPORT_SIZE 28
+#define FEATURE_KBD_REPORT_SIZE 16
+
+#define SUPPORT_KBD_BACKLIGHT BIT(0)
 
 #define MAX_CONTACTS 5
 
@@ -63,18 +67,31 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
 #define QUIRK_NO_INIT_REPORTS		BIT(1)
 #define QUIRK_SKIP_INPUT_MAPPING	BIT(2)
 #define QUIRK_IS_MULTITOUCH		BIT(3)
+#define QUIRK_NO_CONSUMER_USAGES	BIT(4)
+#define QUIRK_USE_KBD_BACKLIGHT		BIT(5)
 
-#define KEYBOARD_QUIRKS			(QUIRK_FIX_NOTEBOOK_REPORT | \
-						 QUIRK_NO_INIT_REPORTS)
-#define TOUCHPAD_QUIRKS			(QUIRK_NO_INIT_REPORTS | \
+#define I2C_KEYBOARD_QUIRKS			(QUIRK_FIX_NOTEBOOK_REPORT | \
+						 QUIRK_NO_INIT_REPORTS | \
+						 QUIRK_NO_CONSUMER_USAGES)
+#define I2C_TOUCHPAD_QUIRKS			(QUIRK_NO_INIT_REPORTS | \
 						 QUIRK_SKIP_INPUT_MAPPING | \
 						 QUIRK_IS_MULTITOUCH)
 
 #define TRKID_SGN       ((TRKID_MAX + 1) >> 1)
 
+struct asus_kbd_leds {
+	struct led_classdev cdev;
+	struct hid_device *hdev;
+	struct work_struct work;
+	unsigned int brightness;
+	bool removed;
+};
+
 struct asus_drvdata {
 	unsigned long quirks;
 	struct input_dev *input;
+	struct asus_kbd_leds *kbd_backlight;
+	bool enable_backlight;
 };
 
 static void asus_report_contact_down(struct input_dev *input,
@@ -169,6 +186,148 @@ static int asus_raw_event(struct hid_device *hdev,
 	return 0;
 }
 
+static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size)
+{
+	unsigned char *dmabuf;
+	int ret;
+
+	dmabuf = kmemdup(buf, buf_size, GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, dmabuf,
+				 buf_size, HID_FEATURE_REPORT,
+				 HID_REQ_SET_REPORT);
+	kfree(dmabuf);
+
+	return ret;
+}
+
+static int asus_kbd_init(struct hid_device *hdev)
+{
+	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54,
+		     0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
+	int ret;
+
+	ret = asus_kbd_set_report(hdev, buf, sizeof(buf));
+	if (ret < 0)
+		hid_err(hdev, "Asus failed to send init command: %d\n", ret);
+
+	return ret;
+}
+
+static int asus_kbd_get_functions(struct hid_device *hdev,
+				  unsigned char *kbd_func)
+{
+	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 };
+	u8 *readbuf;
+	int ret;
+
+	ret = asus_kbd_set_report(hdev, buf, sizeof(buf));
+	if (ret < 0) {
+		hid_err(hdev, "Asus failed to send configuration command: %d\n", ret);
+		return ret;
+	}
+
+	readbuf = kzalloc(FEATURE_KBD_REPORT_SIZE, GFP_KERNEL);
+	if (!readbuf)
+		return -ENOMEM;
+
+	ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, readbuf,
+				 FEATURE_KBD_REPORT_SIZE, HID_FEATURE_REPORT,
+				 HID_REQ_GET_REPORT);
+	if (ret < 0) {
+		hid_err(hdev, "Asus failed to request functions: %d\n", ret);
+		kfree(readbuf);
+		return ret;
+	}
+
+	*kbd_func = readbuf[6];
+
+	kfree(readbuf);
+	return ret;
+}
+
+static void asus_kbd_backlight_set(struct led_classdev *led_cdev,
+				   enum led_brightness brightness)
+{
+	struct asus_kbd_leds *led = container_of(led_cdev, struct asus_kbd_leds,
+						 cdev);
+	if (led->brightness == brightness)
+		return;
+
+	led->brightness = brightness;
+	schedule_work(&led->work);
+}
+
+static enum led_brightness asus_kbd_backlight_get(struct led_classdev *led_cdev)
+{
+	struct asus_kbd_leds *led = container_of(led_cdev, struct asus_kbd_leds,
+						 cdev);
+
+	return led->brightness;
+}
+
+static void asus_kbd_backlight_work(struct work_struct *work)
+{
+	struct asus_kbd_leds *led = container_of(work, struct asus_kbd_leds, work);
+	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0xba, 0xc5, 0xc4, 0x00 };
+	int ret;
+
+	if (led->removed)
+		return;
+
+	buf[4] = led->brightness;
+
+	ret = asus_kbd_set_report(led->hdev, buf, sizeof(buf));
+	if (ret < 0)
+		hid_err(led->hdev, "Asus failed to set keyboard backlight: %d\n", ret);
+}
+
+static int asus_kbd_register_leds(struct hid_device *hdev)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+	unsigned char kbd_func;
+	int ret;
+
+	/* Initialize keyboard */
+	ret = asus_kbd_init(hdev);
+	if (ret < 0)
+		return ret;
+
+	/* Get keyboard functions */
+	ret = asus_kbd_get_functions(hdev, &kbd_func);
+	if (ret < 0)
+		return ret;
+
+	/* Check for backlight support */
+	if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
+		return -ENODEV;
+
+	drvdata->kbd_backlight = devm_kzalloc(&hdev->dev,
+					      sizeof(struct asus_kbd_leds),
+					      GFP_KERNEL);
+	if (!drvdata->kbd_backlight)
+		return -ENOMEM;
+
+	drvdata->kbd_backlight->removed = false;
+	drvdata->kbd_backlight->brightness = 0;
+	drvdata->kbd_backlight->hdev = hdev;
+	drvdata->kbd_backlight->cdev.name = "asus::kbd_backlight";
+	drvdata->kbd_backlight->cdev.max_brightness = 3;
+	drvdata->kbd_backlight->cdev.brightness_set = asus_kbd_backlight_set;
+	drvdata->kbd_backlight->cdev.brightness_get = asus_kbd_backlight_get;
+	INIT_WORK(&drvdata->kbd_backlight->work, asus_kbd_backlight_work);
+
+	ret = devm_led_classdev_register(&hdev->dev, &drvdata->kbd_backlight->cdev);
+	if (ret < 0) {
+		/* No need to have this still around */
+		devm_kfree(&hdev->dev, drvdata->kbd_backlight);
+	}
+
+	return ret;
+}
+
 static int asus_input_configured(struct hid_device *hdev, struct hid_input *hi)
 {
 	struct input_dev *input = hi->input;
@@ -196,9 +355,14 @@ static int asus_input_configured(struct hid_device *hdev, struct hid_input *hi)
 
 	drvdata->input = input;
 
+	if (drvdata->enable_backlight && asus_kbd_register_leds(hdev))
+		hid_warn(hdev, "Failed to initialize backlight.\n");
+
 	return 0;
 }
 
+#define asus_map_key_clear(c)	hid_map_usage_clear(hi, usage, bit, \
+						    max, EV_KEY, (c))
 static int asus_input_mapping(struct hid_device *hdev,
 		struct hid_input *hi, struct hid_field *field,
 		struct hid_usage *usage, unsigned long **bit,
@@ -213,6 +377,65 @@ static int asus_input_mapping(struct hid_device *hdev,
 		return -1;
 	}
 
+	/* ASUS-specific keyboard hotkeys */
+	if ((usage->hid & HID_USAGE_PAGE) == 0xff310000) {
+		set_bit(EV_REP, hi->input->evbit);
+		switch (usage->hid & HID_USAGE) {
+		case 0x10: asus_map_key_clear(KEY_BRIGHTNESSDOWN);	break;
+		case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP);		break;
+		case 0x35: asus_map_key_clear(KEY_DISPLAY_OFF);		break;
+		case 0x6c: asus_map_key_clear(KEY_SLEEP);		break;
+		case 0x82: asus_map_key_clear(KEY_CAMERA);		break;
+		case 0x88: asus_map_key_clear(KEY_RFKILL);			break;
+		case 0xb5: asus_map_key_clear(KEY_CALC);			break;
+		case 0xc4: asus_map_key_clear(KEY_KBDILLUMUP);		break;
+		case 0xc5: asus_map_key_clear(KEY_KBDILLUMDOWN);		break;
+
+		/* ASUS touchpad toggle */
+		case 0x6b: asus_map_key_clear(KEY_F21);			break;
+
+		/* ROG key */
+		case 0x38: asus_map_key_clear(KEY_PROG1);		break;
+
+		/* Fn+C ASUS Splendid */
+		case 0xba: asus_map_key_clear(KEY_PROG2);		break;
+
+		/* Fn+Space Power4Gear Hybrid */
+		case 0x5c: asus_map_key_clear(KEY_PROG3);		break;
+
+		default:
+			/* ASUS lazily declares 256 usages, ignore the rest,
+			 * as some make the keyboard appear as a pointer device. */
+			return -1;
+		}
+
+		/*
+		 * Check and enable backlight only on devices with UsagePage ==
+		 * 0xff31 to avoid initializing the keyboard firmware multiple
+		 * times on devices with multiple HID descriptors but same
+		 * PID/VID.
+		 */
+		if (drvdata->quirks & QUIRK_USE_KBD_BACKLIGHT)
+			drvdata->enable_backlight = true;
+
+		return 1;
+	}
+
+	if (drvdata->quirks & QUIRK_NO_CONSUMER_USAGES &&
+		(usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER) {
+		switch (usage->hid & HID_USAGE) {
+		case 0xe2: /* Mute */
+		case 0xe9: /* Volume up */
+		case 0xea: /* Volume down */
+			return 0;
+		default:
+			/* Ignore dummy Consumer usages which make the
+			 * keyboard incorrectly appear as a pointer device.
+			 */
+			return -1;
+		}
+	}
+
 	return 0;
 }
 
@@ -305,6 +528,16 @@ static int asus_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	return ret;
 }
 
+static void asus_remove(struct hid_device *hdev)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->kbd_backlight) {
+		drvdata->kbd_backlight->removed = true;
+		cancel_work_sync(&drvdata->kbd_backlight->work);
+	}
+}
+
 static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
@@ -320,9 +553,13 @@ static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 
 static const struct hid_device_id asus_devices[] = {
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
-		 USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD), KEYBOARD_QUIRKS},
+		USB_DEVICE_ID_ASUSTEK_I2C_KEYBOARD), I2C_KEYBOARD_QUIRKS},
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
-			 USB_DEVICE_ID_ASUSTEK_TOUCHPAD), TOUCHPAD_QUIRKS },
+		USB_DEVICE_ID_ASUSTEK_I2C_TOUCHPAD), I2C_TOUCHPAD_QUIRKS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
+		USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
+		USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2), QUIRK_USE_KBD_BACKLIGHT },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, asus_devices);
@@ -332,6 +569,7 @@ static struct hid_driver asus_driver = {
 	.id_table		= asus_devices,
 	.report_fixup		= asus_report_fixup,
 	.probe                  = asus_probe,
+	.remove			= asus_remove,
 	.input_mapping          = asus_input_mapping,
 	.input_configured       = asus_input_configured,
 #ifdef CONFIG_PM

drivers/hid/hid-core.c

@@ -1694,7 +1694,7 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
 		len += sprintf(buf + len, "input");
 	if (hdev->claimed & HID_CLAIMED_HIDDEV)
 		len += sprintf(buf + len, "%shiddev%d", len ? "," : "",
-				hdev->minor);
+				((struct hiddev *)hdev->hiddev)->minor);
 	if (hdev->claimed & HID_CLAIMED_HIDRAW)
 		len += sprintf(buf + len, "%shidraw%d", len ? "," : "",
 				((struct hidraw *)hdev->hidraw)->minor);
@@ -1851,8 +1851,10 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD) },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_TOUCHPAD) },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_I2C_KEYBOARD) },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_I2C_TOUCHPAD) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AUREAL, USB_DEVICE_ID_AUREAL_W01RN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185BFM, 0x2208) },
@@ -1891,6 +1893,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_ACCUTOUCH_2216) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
@@ -1991,6 +1994,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTI, USB_DEVICE_ID_USB_SUN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2) },

drivers/hid/hid-cp2112.c

@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio/driver.h>
 #include <linux/hid.h>
+#include <linux/hidraw.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/nls.h>
@@ -1297,7 +1298,8 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	dev->adap.algo_data	= dev;
 	dev->adap.dev.parent	= &hdev->dev;
 	snprintf(dev->adap.name, sizeof(dev->adap.name),
-		 "CP2112 SMBus Bridge on hiddev%d", hdev->minor);
+		 "CP2112 SMBus Bridge on hidraw%d",
+		 ((struct hidraw *)hdev->hidraw)->minor);
 	dev->hwversion = buf[2];
 	init_waitqueue_head(&dev->wait);
 

drivers/hid/hid-debug.c

@@ -140,9 +140,11 @@ static const struct hid_usage_entry hid_usage_table[] = {
     {0, 0x03, "LightPen"},
     {0, 0x04, "TouchScreen"},
     {0, 0x05, "TouchPad"},
+    {0, 0x0e, "DeviceConfiguration"},
     {0, 0x20, "Stylus"},
     {0, 0x21, "Puck"},
     {0, 0x22, "Finger"},
+    {0, 0x23, "DeviceSettings"},
     {0, 0x30, "TipPressure"},
     {0, 0x31, "BarrelPressure"},
     {0, 0x32, "InRange"},

drivers/hid/hid-ids.h

@@ -173,8 +173,10 @@
 #define USB_VENDOR_ID_ASUSTEK		0x0b05
 #define USB_DEVICE_ID_ASUSTEK_LCM	0x1726
 #define USB_DEVICE_ID_ASUSTEK_LCM2	0x175b
-#define USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD	0x8585
-#define USB_DEVICE_ID_ASUSTEK_TOUCHPAD	0x0101
+#define USB_DEVICE_ID_ASUSTEK_I2C_KEYBOARD	0x8585
+#define USB_DEVICE_ID_ASUSTEK_I2C_TOUCHPAD	0x0101
+#define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854
+#define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837
 
 #define USB_VENDOR_ID_ATEN		0x0557
 #define USB_DEVICE_ID_ATEN_UC100KM	0x2004
@@ -184,6 +186,7 @@
 #define USB_DEVICE_ID_ATEN_4PORTKVMC	0x2208
 #define USB_DEVICE_ID_ATEN_CS682	0x2213
 #define USB_DEVICE_ID_ATEN_CS692	0x8021
+#define USB_DEVICE_ID_ATEN_CS1758	0x2220
 
 #define USB_VENDOR_ID_ATMEL		0x03eb
 #define USB_DEVICE_ID_ATMEL_MULTITOUCH	0x211c
@@ -366,6 +369,7 @@
 #define USB_VENDOR_ID_ELO		0x04E7
 #define USB_DEVICE_ID_ELO_TS2515	0x0022
 #define USB_DEVICE_ID_ELO_TS2700	0x0020
+#define USB_DEVICE_ID_ELO_ACCUTOUCH_2216	0x0050
 
 #define USB_VENDOR_ID_EMS		0x2006
 #define USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II 0x0118
@@ -548,6 +552,9 @@
 #define USB_VENDOR_ID_IRTOUCHSYSTEMS	0x6615
 #define USB_DEVICE_ID_IRTOUCH_INFRARED_USB	0x0070
 
+#define USB_VENDOR_ID_INNOMEDIA			0x1292
+#define USB_DEVICE_ID_INNEX_GENESIS_ATARI	0x4745
+
 #define USB_VENDOR_ID_ITE               0x048d
 #define USB_DEVICE_ID_ITE_LENOVO_YOGA   0x8386
 #define USB_DEVICE_ID_ITE_LENOVO_YOGA2  0x8350
@@ -771,6 +778,9 @@
 #define USB_DEVICE_ID_NOVATEK_PCT	0x0600
 #define USB_DEVICE_ID_NOVATEK_MOUSE	0x1602
 
+#define USB_VENDOR_ID_NTI               0x0757
+#define USB_DEVICE_ID_USB_SUN           0x0a00
+
 #define USB_VENDOR_ID_NTRIG		0x1b96
 #define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN   0x0001
 #define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1   0x0003

drivers/hid/hid-input.c

@@ -1150,18 +1150,26 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 
 	/*
 	 * Ignore out-of-range values as per HID specification,
-	 * section 5.10 and 6.2.25.
+	 * section 5.10 and 6.2.25, when NULL state bit is present.
+	 * When it's not, clamp the value to match Microsoft's input
+	 * driver as mentioned in "Required HID usages for digitizers":
+	 * https://msdn.microsoft.com/en-us/library/windows/hardware/dn672278(v=vs.85).asp
 	 *
 	 * The logical_minimum < logical_maximum check is done so that we
 	 * don't unintentionally discard values sent by devices which
 	 * don't specify logical min and max.
 	 */
 	if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
-	    (field->logical_minimum < field->logical_maximum) &&
-	    (value < field->logical_minimum ||
-	     value > field->logical_maximum)) {
-		dbg_hid("Ignoring out-of-range value %x\n", value);
-		return;
+	    (field->logical_minimum < field->logical_maximum)) {
+		if (field->flags & HID_MAIN_ITEM_NULL_STATE &&
+		    (value < field->logical_minimum ||
+		     value > field->logical_maximum)) {
+			dbg_hid("Ignoring out-of-range value %x\n", value);
+			return;
+		}
+		value = clamp(value,
+			      field->logical_minimum,
+			      field->logical_maximum);
 	}
 
 	/*

drivers/hid/hid-logitech-dj.c

@@ -692,8 +692,12 @@ static void logi_dj_ll_close(struct hid_device *hid)
 	dbg_hid("%s:%s\n", __func__, hid->phys);
 }
 
-static u8 unifying_name_query[]  = {0x10, 0xff, 0x83, 0xb5, 0x40, 0x00, 0x00};
-static u8 unifying_name_answer[] = {0x11, 0xff, 0x83, 0xb5};
+/*
+ * Register 0xB5 is "pairing information". It is solely intended for the
+ * receiver, so do not overwrite the device index.
+ */
+static u8 unifying_pairing_query[]  = {0x10, 0xff, 0x83, 0xb5};
+static u8 unifying_pairing_answer[] = {0x11, 0xff, 0x83, 0xb5};
 
 static int logi_dj_ll_raw_request(struct hid_device *hid,
 				  unsigned char reportnum, __u8 *buf,
@@ -712,9 +716,9 @@ static int logi_dj_ll_raw_request(struct hid_device *hid,
 
 		/* special case where we should not overwrite
 		 * the device_index */
-		if (count == 7 && !memcmp(buf, unifying_name_query,
-					  sizeof(unifying_name_query)))
-			buf[4] |= djdev->device_index - 1;
+		if (count == 7 && !memcmp(buf, unifying_pairing_query,
+					  sizeof(unifying_pairing_query)))
+			buf[4] = (buf[4] & 0xf0) | (djdev->device_index - 1);
 		else
 			buf[1] = djdev->device_index;
 		return hid_hw_raw_request(djrcv_dev->hdev, reportnum, buf,
@@ -911,9 +915,8 @@ static int logi_dj_hidpp_event(struct hid_device *hdev,
 		/* special case were the device wants to know its unifying
 		 * name */
 		if (size == HIDPP_REPORT_LONG_LENGTH &&
-		    !memcmp(data, unifying_name_answer,
-			    sizeof(unifying_name_answer)) &&
-		    ((data[4] & 0xF0) == 0x40))
+		    !memcmp(data, unifying_pairing_answer,
+			    sizeof(unifying_pairing_answer)))
 			device_index = (data[4] & 0x0F) + 1;
 		else
 			return false;

drivers/hid/hid-multitouch.c

@@ -69,6 +69,7 @@ MODULE_LICENSE("GPL");
 #define MT_QUIRK_CONTACT_CNT_ACCURATE	(1 << 12)
 #define MT_QUIRK_FORCE_GET_FEATURE	(1 << 13)
 #define MT_QUIRK_FIX_CONST_CONTACT_ID	(1 << 14)
+#define MT_QUIRK_TOUCH_SIZE_SCALING	(1 << 15)
 
 #define MT_INPUTMODE_TOUCHSCREEN	0x02
 #define MT_INPUTMODE_TOUCHPAD		0x03
@@ -222,7 +223,8 @@ static struct mt_class mt_classes[] = {
 	 */
 	{ .name = MT_CLS_3M,
 		.quirks = MT_QUIRK_VALID_IS_CONFIDENCE |
-			MT_QUIRK_SLOT_IS_CONTACTID,
+			MT_QUIRK_SLOT_IS_CONTACTID |
+			MT_QUIRK_TOUCH_SIZE_SCALING,
 		.sn_move = 2048,
 		.sn_width = 128,
 		.sn_height = 128,
@@ -658,9 +660,17 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input)
 		if (active) {
 			/* this finger is in proximity of the sensor */
 			int wide = (s->w > s->h);
-			/* divided by two to match visual scale of touch */
-			int major = max(s->w, s->h) >> 1;
-			int minor = min(s->w, s->h) >> 1;
+			int major = max(s->w, s->h);
+			int minor = min(s->w, s->h);
+
+			/*
+			 * divided by two to match visual scale of touch
+			 * for devices with this quirk
+			 */
+			if (td->mtclass.quirks & MT_QUIRK_TOUCH_SIZE_SCALING) {
+				major = major >> 1;
+				minor = minor >> 1;
+			}
 
 			input_event(input, EV_ABS, ABS_MT_POSITION_X, s->x);
 			input_event(input, EV_ABS, ABS_MT_POSITION_Y, s->y);

drivers/hid/hid-nti.c

+/*
+ *  USB HID quirks support for Network Technologies, Inc. "USB-SUN" USB
+ *  adapter for pre-USB Sun keyboards
+ *
+ *  Copyright (c) 2011 Google, Inc.
+ *
+ * Based on HID apple driver by
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+MODULE_AUTHOR("Jonathan Klabunde Tomer <jktomer@google.com>");
+MODULE_DESCRIPTION("HID driver for Network Technologies USB-SUN keyboard adapter");
+
+/*
+ * NTI Sun keyboard adapter has wrong logical maximum in report descriptor
+ */
+static __u8 *nti_usbsun_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	if (*rsize >= 60 && rdesc[53] == 0x65 && rdesc[59] == 0x65) {
+		hid_info(hdev, "fixing up NTI USB-SUN keyboard adapter report descriptor\n");
+		rdesc[53] = rdesc[59] = 0xe7;
+	}
+	return rdesc;
+}
+
+static const struct hid_device_id nti_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTI, USB_DEVICE_ID_USB_SUN) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, nti_devices);
+
+static struct hid_driver nti_driver = {
+	.name = "nti",
+	.id_table = nti_devices,
+	.report_fixup = nti_usbsun_report_fixup
+};
+
+module_hid_driver(nti_driver);
+
+MODULE_LICENSE("GPL");

drivers/hid/i2c-hid/i2c-hid.c

@@ -508,66 +508,6 @@ static int i2c_hid_get_report_length(struct hid_report *report)
 		report->device->report_enum[report->type].numbered + 2;
 }
 
-static void i2c_hid_init_report(struct hid_report *report, u8 *buffer,
-	size_t bufsize)
-{
-	struct hid_device *hid = report->device;
-	struct i2c_client *client = hid->driver_data;
-	struct i2c_hid *ihid = i2c_get_clientdata(client);
-	unsigned int size, ret_size;
-
-	size = i2c_hid_get_report_length(report);
-	if (i2c_hid_get_report(client,
-			report->type == HID_FEATURE_REPORT ? 0x03 : 0x01,
-			report->id, buffer, size))
-		return;
-
-	i2c_hid_dbg(ihid, "report (len=%d): %*ph\n", size, size, buffer);
-
-	ret_size = buffer[0] | (buffer[1] << 8);
-
-	if (ret_size != size) {
-		dev_err(&client->dev, "error in %s size:%d / ret_size:%d\n",
-			__func__, size, ret_size);
-		return;
-	}
-
-	/* hid->driver_lock is held as we are in probe function,
-	 * we just need to setup the input fields, so using
-	 * hid_report_raw_event is safe. */
-	hid_report_raw_event(hid, report->type, buffer + 2, size - 2, 1);
-}
-
-/*
- * Initialize all reports
- */
-static void i2c_hid_init_reports(struct hid_device *hid)
-{
-	struct hid_report *report;
-	struct i2c_client *client = hid->driver_data;
-	struct i2c_hid *ihid = i2c_get_clientdata(client);
-	u8 *inbuf = kzalloc(ihid->bufsize, GFP_KERNEL);
-
-	if (!inbuf) {
-		dev_err(&client->dev, "can not retrieve initial reports\n");
-		return;
-	}
-
-	/*
-	 * The device must be powered on while we fetch initial reports
-	 * from it.
-	 */
-	pm_runtime_get_sync(&client->dev);
-
-	list_for_each_entry(report,
-		&hid->report_enum[HID_FEATURE_REPORT].report_list, list)
-		i2c_hid_init_report(report, inbuf, ihid->bufsize);
-
-	pm_runtime_put(&client->dev);
-
-	kfree(inbuf);
-}
-
 /*
  * Traverse the supplied list of reports and find the longest
  */
@@ -789,9 +729,6 @@ static int i2c_hid_start(struct hid_device *hid)
 			return ret;
 	}
 
-	if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS))
-		i2c_hid_init_reports(hid);
-
 	return 0;
 }
 
@@ -994,6 +931,11 @@ static int i2c_hid_of_probe(struct i2c_client *client,
 	}
 	pdata->hid_descriptor_address = val;
 
+	ret = of_property_read_u32(dev->of_node, "post-power-on-delay-ms",
+				   &val);
+	if (!ret)
+		pdata->post_power_delay_ms = val;
+
 	return 0;
 }
 
@@ -1053,6 +995,24 @@ static int i2c_hid_probe(struct i2c_client *client,
 		ihid->pdata = *platform_data;
 	}
 
+	ihid->pdata.supply = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(ihid->pdata.supply)) {
+		ret = PTR_ERR(ihid->pdata.supply);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&client->dev, "Failed to get regulator: %d\n",
+				ret);
+		goto err;
+	}
+
+	ret = regulator_enable(ihid->pdata.supply);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to enable regulator: %d\n",
+			ret);
+		goto err;
+	}
+	if (ihid->pdata.post_power_delay_ms)
+		msleep(ihid->pdata.post_power_delay_ms);
+
 	i2c_set_clientdata(client, ihid);
 
 	ihid->client = client;
@@ -1068,7 +1028,7 @@ static int i2c_hid_probe(struct i2c_client *client,
 	 * real computation later. */
 	ret = i2c_hid_alloc_buffers(ihid, HID_MIN_BUFFER_SIZE);
 	if (ret < 0)
-		goto err;
+		goto err_regulator;
 
 	pm_runtime_get_noresume(&client->dev);
 	pm_runtime_set_active(&client->dev);
@@ -1125,6 +1085,9 @@ static int i2c_hid_probe(struct i2c_client *client,
 	pm_runtime_put_noidle(&client->dev);
 	pm_runtime_disable(&client->dev);
 
+err_regulator:
+	regulator_disable(ihid->pdata.supply);
+
 err:
 	i2c_hid_free_buffers(ihid);
 	kfree(ihid);
@@ -1149,6 +1112,8 @@ static int i2c_hid_remove(struct i2c_client *client)
 	if (ihid->bufsize)
 		i2c_hid_free_buffers(ihid);
 
+	regulator_disable(ihid->pdata.supply);
+
 	kfree(ihid);
 
 	return 0;
@@ -1199,6 +1164,10 @@ static int i2c_hid_suspend(struct device *dev)
 		else
 			hid_warn(hid, "Failed to enable irq wake: %d\n",
 				wake_status);
+	} else {
+		ret = regulator_disable(ihid->pdata.supply);
+		if (ret < 0)
+			hid_warn(hid, "Failed to disable supply: %d\n", ret);
 	}
 
 	return 0;
@@ -1212,7 +1181,13 @@ static int i2c_hid_resume(struct device *dev)
 	struct hid_device *hid = ihid->hid;
 	int wake_status;
 
-	if (device_may_wakeup(&client->dev) && ihid->irq_wake_enabled) {
+	if (!device_may_wakeup(&client->dev)) {
+		ret = regulator_enable(ihid->pdata.supply);
+		if (ret < 0)
+			hid_warn(hid, "Failed to enable supply: %d\n", ret);
+		if (ihid->pdata.post_power_delay_ms)
+			msleep(ihid->pdata.post_power_delay_ms);
+	} else if (ihid->irq_wake_enabled) {
 		wake_status = disable_irq_wake(client->irq);
 		if (!wake_status)
 			ihid->irq_wake_enabled = false;

drivers/hid/usbhid/hid-core.c

@@ -52,6 +52,10 @@ static unsigned int hid_mousepoll_interval;
 module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
 MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
 
+static unsigned int hid_jspoll_interval;
+module_param_named(jspoll, hid_jspoll_interval, uint, 0644);
+MODULE_PARM_DESC(jspoll, "Polling interval of joysticks");
+
 static unsigned int ignoreled;
 module_param_named(ignoreled, ignoreled, uint, 0644);
 MODULE_PARM_DESC(ignoreled, "Autosuspend with active leds");
@@ -753,11 +757,9 @@ void usbhid_init_reports(struct hid_device *hid)
 	struct hid_report_enum *report_enum;
 	int err, ret;
 
-	if (!(hid->quirks & HID_QUIRK_NO_INIT_INPUT_REPORTS)) {
-		report_enum = &hid->report_enum[HID_INPUT_REPORT];
-		list_for_each_entry(report, &report_enum->report_list, list)
-			usbhid_submit_report(hid, report, USB_DIR_IN);
-	}
+	report_enum = &hid->report_enum[HID_INPUT_REPORT];
+	list_for_each_entry(report, &report_enum->report_list, list)
+		usbhid_submit_report(hid, report, USB_DIR_IN);
 
 	report_enum = &hid->report_enum[HID_FEATURE_REPORT];
 	list_for_each_entry(report, &report_enum->report_list, list)
@@ -1004,10 +1006,9 @@ static int usbhid_parse(struct hid_device *hid)
 		return -EINVAL;
 	}
 
-	if (!(rdesc = kmalloc(rsize, GFP_KERNEL))) {
-		dbg_hid("couldn't allocate rdesc memory\n");
+	rdesc = kmalloc(rsize, GFP_KERNEL);
+	if (!rdesc)
 		return -ENOMEM;
-	}
 
 	hid_set_idle(dev, interface->desc.bInterfaceNumber, 0, 0);
 
@@ -1077,13 +1078,21 @@ static int usbhid_start(struct hid_device *hid)
 		if (hid->quirks & HID_QUIRK_FULLSPEED_INTERVAL &&
 		    dev->speed == USB_SPEED_HIGH) {
 			interval = fls(endpoint->bInterval*8);
-			printk(KERN_INFO "%s: Fixing fullspeed to highspeed interval: %d -> %d\n",
-			       hid->name, endpoint->bInterval, interval);
+			pr_info("%s: Fixing fullspeed to highspeed interval: %d -> %d\n",
+				hid->name, endpoint->bInterval, interval);
 		}
 
-		/* Change the polling interval of mice. */
-		if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0)
-			interval = hid_mousepoll_interval;
+		/* Change the polling interval of mice and joysticks. */
+		switch (hid->collection->usage) {
+		case HID_GD_MOUSE:
+			if (hid_mousepoll_interval > 0)
+				interval = hid_mousepoll_interval;
+			break;
+		case HID_GD_JOYSTICK:
+			if (hid_jspoll_interval > 0)
+				interval = hid_jspoll_interval;
+			break;
+		}
 
 		ret = -ENOMEM;
 		if (usb_endpoint_dir_in(endpoint)) {
@@ -1120,9 +1129,6 @@ static int usbhid_start(struct hid_device *hid)
 	usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma;
 	usbhid->urbctrl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-	if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS))
-		usbhid_init_reports(hid);
-
 	set_bit(HID_STARTED, &usbhid->iofl);
 
 	if (hid->quirks & HID_QUIRK_ALWAYS_POLL) {
@@ -1456,10 +1462,9 @@ static int hid_post_reset(struct usb_interface *intf)
 	 * the size of the HID report descriptor has not changed.
 	 */
 	rdesc = kmalloc(hid->dev_rsize, GFP_KERNEL);
-	if (!rdesc) {
-		dbg_hid("couldn't allocate rdesc memory (post_reset)\n");
+	if (!rdesc)
 		return -ENOMEM;
-	}
+
 	status = hid_get_class_descriptor(dev,
 				interface->desc.bInterfaceNumber,
 				HID_DT_REPORT, rdesc, hid->dev_rsize);
@@ -1637,7 +1642,7 @@ static int __init hid_init(void)
 	retval = usb_register(&hid_driver);
 	if (retval)
 		goto usb_register_fail;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
+	pr_info(KBUILD_MODNAME ": " DRIVER_DESC "\n");
 
 	return 0;
 usb_register_fail:

drivers/hid/usbhid/hid-quirks.c

@@ -65,6 +65,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS682, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS692, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS1758, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET },
@@ -161,10 +162,11 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_HD, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_QUAD_HD, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_TP_V103, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A096, HID_QUIRK_NO_INIT_INPUT_REPORTS },
+	{ USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A096, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MULTIPLE_1781, USB_DEVICE_ID_RAPHNET_4NES4SNES_OLD, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_DRACAL_RAPHNET, USB_DEVICE_ID_RAPHNET_2NES2SNES, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_DRACAL_RAPHNET, USB_DEVICE_ID_RAPHNET_4NES4SNES, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_INNOMEDIA, USB_DEVICE_ID_INNEX_GENESIS_ATARI, HID_QUIRK_MULTI_INPUT },
 
 	{ 0, 0 }
 };
@@ -240,10 +242,8 @@ static int usbhid_modify_dquirk(const u16 idVendor, const u16 idProduct,
 	}
 
 	q_new = kmalloc(sizeof(struct quirks_list_struct), GFP_KERNEL);
-	if (!q_new) {
-		dbg_hid("Could not allocate quirks_list_struct\n");
+	if (!q_new)
 		return -ENOMEM;
-	}
 
 	q_new->hid_bl_item.idVendor = idVendor;
 	q_new->hid_bl_item.idProduct = idProduct;
@@ -309,10 +309,9 @@ int usbhid_quirks_init(char **quirks_param)
 				&idVendor, &idProduct, &quirks);
 
 		if (m != 3 ||
-				usbhid_modify_dquirk(idVendor, idProduct, quirks) != 0) {
-			printk(KERN_WARNING
-					"Could not parse HID quirk module param %s\n",
-					quirks_param[n]);
+		    usbhid_modify_dquirk(idVendor, idProduct, quirks) != 0) {
+			pr_warn("Could not parse HID quirk module param %s\n",
+				quirks_param[n]);
 		}
 	}
 

drivers/hid/usbhid/hiddev.c

@@ -47,16 +47,6 @@
 #endif
 #define HIDDEV_BUFFER_SIZE	2048
 
-struct hiddev {
-	int exist;
-	int open;
-	struct mutex existancelock;
-	wait_queue_head_t wait;
-	struct hid_device *hid;
-	struct list_head list;
-	spinlock_t list_lock;
-};
-
 struct hiddev_list {
 	struct hiddev_usage_ref buffer[HIDDEV_BUFFER_SIZE];
 	int head;
@@ -690,6 +680,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	case HIDIOCINITREPORT:
 		usbhid_init_reports(hid);
+		hiddev->initialized = true;
 		r = 0;
 		break;
 
@@ -791,6 +782,10 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case HIDIOCGUSAGES:
 	case HIDIOCSUSAGES:
 	case HIDIOCGCOLLECTIONINDEX:
+		if (!hiddev->initialized) {
+			usbhid_init_reports(hid);
+			hiddev->initialized = true;
+		}
 		r = hiddev_ioctl_usage(hiddev, cmd, user_arg);
 		break;
 
@@ -911,6 +906,15 @@ int hiddev_connect(struct hid_device *hid, unsigned int force)
 		kfree(hiddev);
 		return -1;
 	}
+
+	/*
+	 * If HID_QUIRK_NO_INIT_REPORTS is set, make sure we don't initialize
+	 * the reports.
+	 */
+	hiddev->initialized = hid->quirks & HID_QUIRK_NO_INIT_REPORTS;
+
+	hiddev->minor = usbhid->intf->minor;
+
 	return 0;
 }
 

drivers/hid/wacom.h

@@ -110,6 +110,7 @@ enum wacom_worker {
 	WACOM_WORKER_WIRELESS,
 	WACOM_WORKER_BATTERY,
 	WACOM_WORKER_REMOTE,
+	WACOM_WORKER_MODE_CHANGE,
 };
 
 struct wacom;
@@ -167,6 +168,7 @@ struct wacom {
 	struct work_struct remote_work;
 	struct delayed_work init_work;
 	struct wacom_remote *remote;
+	struct work_struct mode_change_work;
 	bool generic_has_leds;
 	struct wacom_leds {
 		struct wacom_group_leds *groups;
@@ -196,6 +198,9 @@ static inline void wacom_schedule_work(struct wacom_wac *wacom_wac,
 	case WACOM_WORKER_REMOTE:
 		schedule_work(&wacom->remote_work);
 		break;
+	case WACOM_WORKER_MODE_CHANGE:
+		schedule_work(&wacom->mode_change_work);
+		break;
 	}
 }
 

drivers/hid/wacom_sys.c

@@ -325,6 +325,13 @@ static void wacom_post_parse_hid(struct hid_device *hdev,
 
 	if (features->type == HID_GENERIC) {
 		/* Any last-minute generic device setup */
+		if (wacom_wac->has_mode_change) {
+			if (wacom_wac->is_direct_mode)
+				features->device_type |= WACOM_DEVICETYPE_DIRECT;
+			else
+				features->device_type &= ~WACOM_DEVICETYPE_DIRECT;
+		}
+
 		if (features->touch_max > 1) {
 			if (features->device_type & WACOM_DEVICETYPE_DIRECT)
 				input_mt_init_slots(wacom_wac->touch_input,
@@ -2093,8 +2100,10 @@ static void wacom_set_shared_values(struct wacom_wac *wacom_wac)
 		wacom_wac->shared->touch_input = wacom_wac->touch_input;
 	}
 
-	if (wacom_wac->has_mute_touch_switch)
+	if (wacom_wac->has_mute_touch_switch) {
 		wacom_wac->shared->has_mute_touch_switch = true;
+		wacom_wac->shared->is_touch_on = true;
+	}
 
 	if (wacom_wac->shared->has_mute_touch_switch &&
 	    wacom_wac->shared->touch_input) {
@@ -2490,6 +2499,46 @@ static void wacom_remote_work(struct work_struct *work)
 	}
 }
 
+static void wacom_mode_change_work(struct work_struct *work)
+{
+	struct wacom *wacom = container_of(work, struct wacom, mode_change_work);
+	struct wacom_shared *shared = wacom->wacom_wac.shared;
+	struct wacom *wacom1 = NULL;
+	struct wacom *wacom2 = NULL;
+	bool is_direct = wacom->wacom_wac.is_direct_mode;
+	int error = 0;
+
+	if (shared->pen) {
+		wacom1 = hid_get_drvdata(shared->pen);
+		wacom_release_resources(wacom1);
+		hid_hw_stop(wacom1->hdev);
+		wacom1->wacom_wac.has_mode_change = true;
+		wacom1->wacom_wac.is_direct_mode = is_direct;
+	}
+
+	if (shared->touch) {
+		wacom2 = hid_get_drvdata(shared->touch);
+		wacom_release_resources(wacom2);
+		hid_hw_stop(wacom2->hdev);
+		wacom2->wacom_wac.has_mode_change = true;
+		wacom2->wacom_wac.is_direct_mode = is_direct;
+	}
+
+	if (wacom1) {
+		error = wacom_parse_and_register(wacom1, false);
+		if (error)
+			return;
+	}
+
+	if (wacom2) {
+		error = wacom_parse_and_register(wacom2, false);
+		if (error)
+			return;
+	}
+
+	return;
+}
+
 static int wacom_probe(struct hid_device *hdev,
 		const struct hid_device_id *id)
 {
@@ -2534,6 +2583,7 @@ static int wacom_probe(struct hid_device *hdev,
 	INIT_WORK(&wacom->wireless_work, wacom_wireless_work);
 	INIT_WORK(&wacom->battery_work, wacom_battery_work);
 	INIT_WORK(&wacom->remote_work, wacom_remote_work);
+	INIT_WORK(&wacom->mode_change_work, wacom_mode_change_work);
 
 	/* ask for the report descriptor to be loaded by HID */
 	error = hid_parse(hdev);
@@ -2576,6 +2626,7 @@ static void wacom_remove(struct hid_device *hdev)
 	cancel_work_sync(&wacom->wireless_work);
 	cancel_work_sync(&wacom->battery_work);
 	cancel_work_sync(&wacom->remote_work);
+	cancel_work_sync(&wacom->mode_change_work);
 	if (hdev->bus == BUS_BLUETOOTH)
 		device_remove_file(&hdev->dev, &dev_attr_speed);
 

drivers/hid/wacom_wac.c

@@ -773,131 +773,6 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 	return 0;
 }
 
-static int wacom_remote_irq(struct wacom_wac *wacom_wac, size_t len)
-{
-	unsigned char *data = wacom_wac->data;
-	struct input_dev *input;
-	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
-	struct wacom_remote *remote = wacom->remote;
-	int bat_charging, bat_percent, touch_ring_mode;
-	__u32 serial;
-	int i, index = -1;
-	unsigned long flags;
-
-	if (data[0] != WACOM_REPORT_REMOTE) {
-		hid_dbg(wacom->hdev, "%s: received unknown report #%d",
-			__func__, data[0]);
-		return 0;
-	}
-
-	serial = data[3] + (data[4] << 8) + (data[5] << 16);
-	wacom_wac->id[0] = PAD_DEVICE_ID;
-
-	spin_lock_irqsave(&remote->remote_lock, flags);
-
-	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
-		if (remote->remotes[i].serial == serial) {
-			index = i;
-			break;
-		}
-	}
-
-	if (index < 0 || !remote->remotes[index].registered)
-		goto out;
-
-	input = remote->remotes[index].input;
-
-	input_report_key(input, BTN_0, (data[9] & 0x01));
-	input_report_key(input, BTN_1, (data[9] & 0x02));
-	input_report_key(input, BTN_2, (data[9] & 0x04));
-	input_report_key(input, BTN_3, (data[9] & 0x08));
-	input_report_key(input, BTN_4, (data[9] & 0x10));
-	input_report_key(input, BTN_5, (data[9] & 0x20));
-	input_report_key(input, BTN_6, (data[9] & 0x40));
-	input_report_key(input, BTN_7, (data[9] & 0x80));
-
-	input_report_key(input, BTN_8, (data[10] & 0x01));
-	input_report_key(input, BTN_9, (data[10] & 0x02));
-	input_report_key(input, BTN_A, (data[10] & 0x04));
-	input_report_key(input, BTN_B, (data[10] & 0x08));
-	input_report_key(input, BTN_C, (data[10] & 0x10));
-	input_report_key(input, BTN_X, (data[10] & 0x20));
-	input_report_key(input, BTN_Y, (data[10] & 0x40));
-	input_report_key(input, BTN_Z, (data[10] & 0x80));
-
-	input_report_key(input, BTN_BASE, (data[11] & 0x01));
-	input_report_key(input, BTN_BASE2, (data[11] & 0x02));
-
-	if (data[12] & 0x80)
-		input_report_abs(input, ABS_WHEEL, (data[12] & 0x7f));
-	else
-		input_report_abs(input, ABS_WHEEL, 0);
-
-	bat_percent = data[7] & 0x7f;
-	bat_charging = !!(data[7] & 0x80);
-
-	if (data[9] | data[10] | (data[11] & 0x03) | data[12])
-		input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
-	else
-		input_report_abs(input, ABS_MISC, 0);
-
-	input_event(input, EV_MSC, MSC_SERIAL, serial);
-
-	input_sync(input);
-
-	/*Which mode select (LED light) is currently on?*/
-	touch_ring_mode = (data[11] & 0xC0) >> 6;
-
-	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
-		if (remote->remotes[i].serial == serial)
-			wacom->led.groups[i].select = touch_ring_mode;
-	}
-
-	__wacom_notify_battery(&remote->remotes[index].battery, bat_percent,
-				bat_charging, 1, bat_charging);
-
-out:
-	spin_unlock_irqrestore(&remote->remote_lock, flags);
-	return 0;
-}
-
-static void wacom_remote_status_irq(struct wacom_wac *wacom_wac, size_t len)
-{
-	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
-	unsigned char *data = wacom_wac->data;
-	struct wacom_remote *remote = wacom->remote;
-	struct wacom_remote_data remote_data;
-	unsigned long flags;
-	int i, ret;
-
-	if (data[0] != WACOM_REPORT_DEVICE_LIST)
-		return;
-
-	memset(&remote_data, 0, sizeof(struct wacom_remote_data));
-
-	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
-		int j = i * 6;
-		int serial = (data[j+6] << 16) + (data[j+5] << 8) + data[j+4];
-		bool connected = data[j+2];
-
-		remote_data.remote[i].serial = serial;
-		remote_data.remote[i].connected = connected;
-	}
-
-	spin_lock_irqsave(&remote->remote_lock, flags);
-
-	ret = kfifo_in(&remote->remote_fifo, &remote_data, sizeof(remote_data));
-	if (ret != sizeof(remote_data)) {
-		spin_unlock_irqrestore(&remote->remote_lock, flags);
-		hid_err(wacom->hdev, "Can't queue Remote status event.\n");
-		return;
-	}
-
-	spin_unlock_irqrestore(&remote->remote_lock, flags);
-
-	wacom_schedule_work(wacom_wac, WACOM_WORKER_REMOTE);
-}
-
 static inline bool report_touch_events(struct wacom_wac *wacom)
 {
 	return (touch_arbitration ? !wacom->shared->stylus_in_proximity : 1);
@@ -1116,6 +991,131 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	return 0;
 }
 
+static int wacom_remote_irq(struct wacom_wac *wacom_wac, size_t len)
+{
+	unsigned char *data = wacom_wac->data;
+	struct input_dev *input;
+	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+	struct wacom_remote *remote = wacom->remote;
+	int bat_charging, bat_percent, touch_ring_mode;
+	__u32 serial;
+	int i, index = -1;
+	unsigned long flags;
+
+	if (data[0] != WACOM_REPORT_REMOTE) {
+		hid_dbg(wacom->hdev, "%s: received unknown report #%d",
+			__func__, data[0]);
+		return 0;
+	}
+
+	serial = data[3] + (data[4] << 8) + (data[5] << 16);
+	wacom_wac->id[0] = PAD_DEVICE_ID;
+
+	spin_lock_irqsave(&remote->remote_lock, flags);
+
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		if (remote->remotes[i].serial == serial) {
+			index = i;
+			break;
+		}
+	}
+
+	if (index < 0 || !remote->remotes[index].registered)
+		goto out;
+
+	input = remote->remotes[index].input;
+
+	input_report_key(input, BTN_0, (data[9] & 0x01));
+	input_report_key(input, BTN_1, (data[9] & 0x02));
+	input_report_key(input, BTN_2, (data[9] & 0x04));
+	input_report_key(input, BTN_3, (data[9] & 0x08));
+	input_report_key(input, BTN_4, (data[9] & 0x10));
+	input_report_key(input, BTN_5, (data[9] & 0x20));
+	input_report_key(input, BTN_6, (data[9] & 0x40));
+	input_report_key(input, BTN_7, (data[9] & 0x80));
+
+	input_report_key(input, BTN_8, (data[10] & 0x01));
+	input_report_key(input, BTN_9, (data[10] & 0x02));
+	input_report_key(input, BTN_A, (data[10] & 0x04));
+	input_report_key(input, BTN_B, (data[10] & 0x08));
+	input_report_key(input, BTN_C, (data[10] & 0x10));
+	input_report_key(input, BTN_X, (data[10] & 0x20));
+	input_report_key(input, BTN_Y, (data[10] & 0x40));
+	input_report_key(input, BTN_Z, (data[10] & 0x80));
+
+	input_report_key(input, BTN_BASE, (data[11] & 0x01));
+	input_report_key(input, BTN_BASE2, (data[11] & 0x02));
+
+	if (data[12] & 0x80)
+		input_report_abs(input, ABS_WHEEL, (data[12] & 0x7f));
+	else
+		input_report_abs(input, ABS_WHEEL, 0);
+
+	bat_percent = data[7] & 0x7f;
+	bat_charging = !!(data[7] & 0x80);
+
+	if (data[9] | data[10] | (data[11] & 0x03) | data[12])
+		input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+	else
+		input_report_abs(input, ABS_MISC, 0);
+
+	input_event(input, EV_MSC, MSC_SERIAL, serial);
+
+	input_sync(input);
+
+	/*Which mode select (LED light) is currently on?*/
+	touch_ring_mode = (data[11] & 0xC0) >> 6;
+
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		if (remote->remotes[i].serial == serial)
+			wacom->led.groups[i].select = touch_ring_mode;
+	}
+
+	__wacom_notify_battery(&remote->remotes[index].battery, bat_percent,
+				bat_charging, 1, bat_charging);
+
+out:
+	spin_unlock_irqrestore(&remote->remote_lock, flags);
+	return 0;
+}
+
+static void wacom_remote_status_irq(struct wacom_wac *wacom_wac, size_t len)
+{
+	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+	unsigned char *data = wacom_wac->data;
+	struct wacom_remote *remote = wacom->remote;
+	struct wacom_remote_data remote_data;
+	unsigned long flags;
+	int i, ret;
+
+	if (data[0] != WACOM_REPORT_DEVICE_LIST)
+		return;
+
+	memset(&remote_data, 0, sizeof(struct wacom_remote_data));
+
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		int j = i * 6;
+		int serial = (data[j+6] << 16) + (data[j+5] << 8) + data[j+4];
+		bool connected = data[j+2];
+
+		remote_data.remote[i].serial = serial;
+		remote_data.remote[i].connected = connected;
+	}
+
+	spin_lock_irqsave(&remote->remote_lock, flags);
+
+	ret = kfifo_in(&remote->remote_fifo, &remote_data, sizeof(remote_data));
+	if (ret != sizeof(remote_data)) {
+		spin_unlock_irqrestore(&remote->remote_lock, flags);
+		hid_err(wacom->hdev, "Can't queue Remote status event.\n");
+		return;
+	}
+
+	spin_unlock_irqrestore(&remote->remote_lock, flags);
+
+	wacom_schedule_work(wacom_wac, WACOM_WORKER_REMOTE);
+}
+
 static int int_dist(int x1, int y1, int x2, int y2)
 {
 	int x = x2 - x1;
@@ -1739,6 +1739,7 @@ static void wacom_wac_pad_usage_mapping(struct hid_device *hdev,
 		features->device_type |= WACOM_DEVICETYPE_PAD;
 		break;
 	case WACOM_HID_WD_TOUCHONOFF:
+	case WACOM_HID_WD_MUTE_DEVICE:
 		/*
 		 * This usage, which is used to mute touch events, comes
 		 * from the pad packet, but is reported on the touch
@@ -1768,6 +1769,26 @@ static void wacom_wac_pad_usage_mapping(struct hid_device *hdev,
 		wacom_map_usage(input, usage, field, EV_ABS, ABS_WHEEL, 0);
 		features->device_type |= WACOM_DEVICETYPE_PAD;
 		break;
+	case WACOM_HID_WD_BUTTONCONFIG:
+		wacom_map_usage(input, usage, field, EV_KEY, KEY_BUTTONCONFIG, 0);
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+		break;
+	case WACOM_HID_WD_ONSCREEN_KEYBOARD:
+		wacom_map_usage(input, usage, field, EV_KEY, KEY_ONSCREEN_KEYBOARD, 0);
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+		break;
+	case WACOM_HID_WD_CONTROLPANEL:
+		wacom_map_usage(input, usage, field, EV_KEY, KEY_CONTROLPANEL, 0);
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+		break;
+	case WACOM_HID_WD_MODE_CHANGE:
+		/* do not overwrite previous data */
+		if (!wacom_wac->has_mode_change) {
+			wacom_wac->has_mode_change = true;
+			wacom_wac->is_direct_mode = true;
+		}
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+		break;
 	}
 
 	switch (equivalent_usage & 0xfffffff0) {
@@ -1811,12 +1832,13 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
 	struct wacom_features *features = &wacom_wac->features;
 	unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
 	int i;
+	bool is_touch_on = value;
 
 	/*
 	 * Avoid reporting this event and setting inrange_state if this usage
 	 * hasn't been mapped.
 	 */
-	if (!usage->type)
+	if (!usage->type && equivalent_usage != WACOM_HID_WD_MODE_CHANGE)
 		return;
 
 	if (wacom_equivalent_usage(field->physical) == HID_DG_TABLETFUNCTIONKEY) {
@@ -1830,14 +1852,28 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
 			input_event(input, usage->type, usage->code, 0);
 		break;
 
+	case WACOM_HID_WD_MUTE_DEVICE:
+		if (wacom_wac->shared->touch_input && value) {
+			wacom_wac->shared->is_touch_on = !wacom_wac->shared->is_touch_on;
+			is_touch_on = wacom_wac->shared->is_touch_on;
+		}
+
+		/* fall through*/
 	case WACOM_HID_WD_TOUCHONOFF:
 		if (wacom_wac->shared->touch_input) {
 			input_report_switch(wacom_wac->shared->touch_input,
-					    SW_MUTE_DEVICE, !value);
+					    SW_MUTE_DEVICE, !is_touch_on);
 			input_sync(wacom_wac->shared->touch_input);
 		}
 		break;
 
+	case WACOM_HID_WD_MODE_CHANGE:
+		if (wacom_wac->is_direct_mode != value) {
+			wacom_wac->is_direct_mode = value;
+			wacom_schedule_work(&wacom->wacom_wac, WACOM_WORKER_MODE_CHANGE);
+		}
+		break;
+
 	case WACOM_HID_WD_BUTTONCENTER:
 		for (i = 0; i < wacom->led.count; i++)
 			wacom_update_led(wacom, features->numbered_buttons,
@@ -1845,6 +1881,8 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
 		 /* fall through*/
 	default:
 		input_event(input, usage->type, usage->code, value);
+		if (value)
+			wacom_wac->hid_data.pad_input_event_flag = true;
 		break;
 	}
 }
@@ -1885,9 +1923,12 @@ static void wacom_wac_pad_report(struct hid_device *hdev,
 	bool active = wacom_wac->hid_data.inrange_state != 0;
 
 	/* report prox for expresskey events */
-	if (wacom_equivalent_usage(report->field[0]->physical) == HID_DG_TABLETFUNCTIONKEY) {
+	if ((wacom_equivalent_usage(report->field[0]->physical) == HID_DG_TABLETFUNCTIONKEY) &&
+	    wacom_wac->hid_data.pad_input_event_flag) {
 		input_event(input, EV_ABS, ABS_MISC, active ? PAD_DEVICE_ID : 0);
 		input_sync(input);
+		if (!active)
+			wacom_wac->hid_data.pad_input_event_flag = false;
 	}
 
 }
@@ -2197,6 +2238,13 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
 	bool prox = hid_data->tipswitch &&
 		    report_touch_events(wacom_wac);
 
+	if (wacom_wac->shared->has_mute_touch_switch &&
+	    !wacom_wac->shared->is_touch_on) {
+		if (!wacom_wac->shared->touch_down)
+			return;
+		prox = 0;
+	}
+
 	wacom_wac->hid_data.num_received++;
 	if (wacom_wac->hid_data.num_received > wacom_wac->hid_data.num_expected)
 		return;
@@ -4127,7 +4175,7 @@ static const struct wacom_features wacom_features_0x300 =
 	  BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x301 =
 	{ "Wacom Bamboo One M", 21648, 13530, 1023, 31,
-	  BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x302 =
 	{ "Wacom Intuos PT S", 15200, 9500, 1023, 31,
 	  INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,

drivers/hid/wacom_wac.h

@@ -120,6 +120,11 @@
 #define WACOM_HID_WD_BATTERY_LEVEL      (WACOM_HID_UP_WACOMDIGITIZER | 0x043b)
 #define WACOM_HID_WD_EXPRESSKEY00       (WACOM_HID_UP_WACOMDIGITIZER | 0x0910)
 #define WACOM_HID_WD_EXPRESSKEYCAP00    (WACOM_HID_UP_WACOMDIGITIZER | 0x0950)
+#define WACOM_HID_WD_MODE_CHANGE        (WACOM_HID_UP_WACOMDIGITIZER | 0x0980)
+#define WACOM_HID_WD_MUTE_DEVICE        (WACOM_HID_UP_WACOMDIGITIZER | 0x0981)
+#define WACOM_HID_WD_CONTROLPANEL       (WACOM_HID_UP_WACOMDIGITIZER | 0x0982)
+#define WACOM_HID_WD_ONSCREEN_KEYBOARD  (WACOM_HID_UP_WACOMDIGITIZER | 0x0983)
+#define WACOM_HID_WD_BUTTONCONFIG       (WACOM_HID_UP_WACOMDIGITIZER | 0x0986)
 #define WACOM_HID_WD_BUTTONHOME         (WACOM_HID_UP_WACOMDIGITIZER | 0x0990)
 #define WACOM_HID_WD_BUTTONUP           (WACOM_HID_UP_WACOMDIGITIZER | 0x0991)
 #define WACOM_HID_WD_BUTTONDOWN         (WACOM_HID_UP_WACOMDIGITIZER | 0x0992)
@@ -270,6 +275,7 @@ struct wacom_shared {
 	struct hid_device *pen;
 	struct hid_device *touch;
 	bool has_mute_touch_switch;
+	bool is_touch_on;
 };
 
 struct hid_data {
@@ -295,6 +301,7 @@ struct hid_data {
 	int bat_charging;
 	int bat_connected;
 	int ps_connected;
+	bool pad_input_event_flag;
 };
 
 struct wacom_remote_data {
@@ -327,6 +334,9 @@ struct wacom_wac {
 	int mode_value;
 	struct hid_data hid_data;
 	bool has_mute_touch_switch;
+	bool has_mode_change;
+	bool is_direct_mode;
+
 };
 
 #endif

include/linux/hid.h

@@ -268,6 +268,8 @@ struct hid_item {
 #define HID_CP_APPLICATIONLAUNCHBUTTONS	0x000c0180
 #define HID_CP_GENERICGUIAPPLICATIONCONTROLS	0x000c0200
 
+#define HID_DG_DEVICECONFIG	0x000d000e
+#define HID_DG_DEVICESETTINGS	0x000d0023
 #define HID_DG_CONFIDENCE	0x000d0047
 #define HID_DG_WIDTH		0x000d0048
 #define HID_DG_HEIGHT		0x000d0049
@@ -322,7 +324,7 @@ struct hid_item {
 #define HID_QUIRK_MULTI_INPUT			0x00000040
 #define HID_QUIRK_HIDINPUT_FORCE		0x00000080
 #define HID_QUIRK_NO_EMPTY_INPUT		0x00000100
-#define HID_QUIRK_NO_INIT_INPUT_REPORTS		0x00000200
+/* 0x00000200 reserved for backward compatibility, was NO_INIT_INPUT_REPORTS */
 #define HID_QUIRK_ALWAYS_POLL			0x00000400
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00010000
 #define HID_QUIRK_SKIP_OUTPUT_REPORT_ID		0x00020000
@@ -541,7 +543,6 @@ struct hid_device {							/* device report descriptor */
 	struct list_head inputs;					/* The list of inputs */
 	void *hiddev;							/* The hiddev structure */
 	void *hidraw;
-	int minor;							/* Hiddev minor number */
 
 	int open;							/* is the device open by anyone? */
 	char name[128];							/* Device name */

include/linux/hiddev.h

@@ -32,6 +32,18 @@
  * In-kernel definitions.
  */
 
+struct hiddev {
+	int minor;
+	int exist;
+	int open;
+	struct mutex existancelock;
+	wait_queue_head_t wait;
+	struct hid_device *hid;
+	struct list_head list;
+	spinlock_t list_lock;
+	bool initialized;
+};
+
 struct hid_device;
 struct hid_usage;
 struct hid_field;

include/linux/i2c/i2c-hid.h

@@ -14,9 +14,13 @@
 
 #include <linux/types.h>
 
+struct regulator;
+
 /**
  * struct i2chid_platform_data - used by hid over i2c implementation.
  * @hid_descriptor_address: i2c register where the HID descriptor is stored.
+ * @supply: regulator for powering on the device.
+ * @post_power_delay_ms: delay after powering on before device is usable.
  *
  * Note that it is the responsibility of the platform driver (or the acpi 5.0
  * driver, or the flattened device tree) to setup the irq related to the gpio in
@@ -31,6 +35,8 @@
  */
 struct i2c_hid_platform_data {
 	u16 hid_descriptor_address;
+	struct regulator *supply;
+	int post_power_delay_ms;
 };
 
 #endif /* __LINUX_I2C_HID_H */

include/uapi/linux/input-event-codes.h

@@ -641,6 +641,7 @@
  * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.)
  */
 #define KEY_DATA			0x277
+#define KEY_ONSCREEN_KEYBOARD		0x278
 
 #define BTN_TRIGGER_HAPPY		0x2c0
 #define BTN_TRIGGER_HAPPY1		0x2c0

include/uapi/linux/input.h

@@ -61,9 +61,14 @@ struct input_id {
  * Note that input core does not clamp reported values to the
  * [minimum, maximum] limits, such task is left to userspace.
  *
- * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
- * units per millimeter (units/mm), resolution for rotational axes
- * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z)
+ * is reported in units per millimeter (units/mm), resolution
+ * for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported
+ * in units per radian.
+ * When INPUT_PROP_ACCELEROMETER is set the resolution changes.
+ * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in
+ * in units per g (units/g) and in units per degree per second
+ * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ).
  */
 struct input_absinfo {
 	__s32 value;