i2c-eg20t : Support Combined R/W transfer mode

Currently, Combined R/W transfer mode is not supported.
This patch enables Combined R/W transfer mode.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

drivers/i2c/busses/i2c-eg20t.c

@@ -673,25 +673,26 @@ static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap,
 	/* transfer not completed */
 	adap->pch_i2c_xfer_in_progress = true;
 
-	pmsg = &msgs[0];
-	pmsg->flags |= adap->pch_buff_mode_en;
-	status = pmsg->flags;
-	pch_dbg(adap,
-		"After invoking I2C_MODE_SEL :flag= 0x%x\n", status);
-	/* calculate sub address length and message length */
-	/* these are applicable only for buffer mode */
-	subaddrlen = pmsg->buf[0];
-	/* calculate actual message length excluding
-	 * the sub address fields */
-	msglen = (pmsg->len) - (subaddrlen + 1);
-	if (status & (I2C_M_RD)) {
-		pch_dbg(adap, "invoking pch_i2c_readbytes\n");
-		ret = pch_i2c_readbytes(i2c_adap, pmsg, (i + 1 == num),
-				   (i == 0));
-	} else {
-		pch_dbg(adap, "invoking pch_i2c_writebytes\n");
-		ret = pch_i2c_writebytes(i2c_adap, pmsg, (i + 1 == num),
-				    (i == 0));
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+		pmsg->flags |= adap->pch_buff_mode_en;
+		status = pmsg->flags;
+		pch_dbg(adap,
+			"After invoking I2C_MODE_SEL :flag= 0x%x\n", status);
+		/* calculate sub address length and message length */
+		/* these are applicable only for buffer mode */
+		subaddrlen = pmsg->buf[0];
+		/* calculate actual message length excluding
+		 * the sub address fields */
+		msglen = (pmsg->len) - (subaddrlen + 1);
+
+		if ((status & (I2C_M_RD)) != false) {
+			ret = pch_i2c_readbytes(i2c_adap, pmsg, (i + 1 == num),
+						(i == 0));
+		} else {
+			ret = pch_i2c_writebytes(i2c_adap, pmsg, (i + 1 == num),
+						 (i == 0));
+		}
 	}
 
 	adap->pch_i2c_xfer_in_progress = false;	/* transfer completed */