提交 798fee48 编写于 作者: D David S. Miller

Merge tag 'linux-can-next-for-4.6-20160310' of...

Merge tag 'linux-can-next-for-4.6-20160310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2016-03-10

this is a pull request of 5 patch for net-next/master.

Marek Vasut contributes 4 patches for the ifi CAN driver, which makes
it work on real hardware. There is one patch by Ramesh Shanmugasundaram
for the rcar_can driver that adds support for the 3rd generation IP
core.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -9,8 +9,10 @@ Required properties:
"renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC.
"renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC.
"renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
"renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
"renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
"renesas,rcar-gen2-can" for a generic R-Car Gen2 compatible device.
"renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
followed by the generic version.
......@@ -22,6 +24,15 @@ Required properties:
- pinctrl-0: pin control group to be used for this controller.
- pinctrl-names: must be "default".
Required properties for "renesas,can-r8a7795" compatible:
In R8A7795 SoC, "clkp2" can be CANFD clock. This is a div6 clock and can be
used by both CAN and CAN FD controller at the same time. It needs to be scaled
to maximum frequency if any of these controllers use it. This is done using
the below properties.
- assigned-clocks: phandle of clkp2(CANFD) clock.
- assigned-clock-rates: maximum frequency of this clock.
Optional properties:
- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
<0x0> (default) : Peripheral clock (clkp1)
......
......@@ -106,7 +106,7 @@ config CAN_JANZ_ICAN3
config CAN_RCAR
tristate "Renesas R-Car CAN controller"
depends on ARM
depends on ARCH_RENESAS || ARM
---help---
Say Y here if you want to use CAN controller found on Renesas R-Car
SoCs.
......
......@@ -135,8 +135,12 @@
#define IFI_CANFD_RXFIFO_ID 0x6c
#define IFI_CANFD_RXFIFO_ID_ID_OFFSET 0
#define IFI_CANFD_RXFIFO_ID_ID_STD_MASK 0x3ff
#define IFI_CANFD_RXFIFO_ID_ID_XTD_MASK 0x1fffffff
#define IFI_CANFD_RXFIFO_ID_ID_STD_MASK CAN_SFF_MASK
#define IFI_CANFD_RXFIFO_ID_ID_STD_OFFSET 0
#define IFI_CANFD_RXFIFO_ID_ID_STD_WIDTH 10
#define IFI_CANFD_RXFIFO_ID_ID_XTD_MASK CAN_EFF_MASK
#define IFI_CANFD_RXFIFO_ID_ID_XTD_OFFSET 11
#define IFI_CANFD_RXFIFO_ID_ID_XTD_WIDTH 18
#define IFI_CANFD_RXFIFO_ID_IDE BIT(29)
#define IFI_CANFD_RXFIFO_DATA 0x70 /* 0x70..0xac */
......@@ -156,8 +160,12 @@
#define IFI_CANFD_TXFIFO_ID 0xbc
#define IFI_CANFD_TXFIFO_ID_ID_OFFSET 0
#define IFI_CANFD_TXFIFO_ID_ID_STD_MASK 0x3ff
#define IFI_CANFD_TXFIFO_ID_ID_XTD_MASK 0x1fffffff
#define IFI_CANFD_TXFIFO_ID_ID_STD_MASK CAN_SFF_MASK
#define IFI_CANFD_TXFIFO_ID_ID_STD_OFFSET 0
#define IFI_CANFD_TXFIFO_ID_ID_STD_WIDTH 10
#define IFI_CANFD_TXFIFO_ID_ID_XTD_MASK CAN_EFF_MASK
#define IFI_CANFD_TXFIFO_ID_ID_XTD_OFFSET 11
#define IFI_CANFD_TXFIFO_ID_ID_XTD_WIDTH 18
#define IFI_CANFD_TXFIFO_ID_IDE BIT(29)
#define IFI_CANFD_TXFIFO_DATA 0xc0 /* 0xb0..0xfc */
......@@ -229,10 +237,20 @@ static void ifi_canfd_read_fifo(struct net_device *ndev)
rxid = readl(priv->base + IFI_CANFD_RXFIFO_ID);
id = (rxid >> IFI_CANFD_RXFIFO_ID_ID_OFFSET);
if (id & IFI_CANFD_RXFIFO_ID_IDE)
if (id & IFI_CANFD_RXFIFO_ID_IDE) {
id &= IFI_CANFD_RXFIFO_ID_ID_XTD_MASK;
else
/*
* In case the Extended ID frame is received, the standard
* and extended part of the ID are swapped in the register,
* so swap them back to obtain the correct ID.
*/
id = (id >> IFI_CANFD_RXFIFO_ID_ID_XTD_OFFSET) |
((id & IFI_CANFD_RXFIFO_ID_ID_STD_MASK) <<
IFI_CANFD_RXFIFO_ID_ID_XTD_WIDTH);
id |= CAN_EFF_FLAG;
} else {
id &= IFI_CANFD_RXFIFO_ID_ID_STD_MASK;
}
cf->can_id = id;
if (rxdlc & IFI_CANFD_RXFIFO_DLC_ESI) {
......@@ -514,25 +532,25 @@ static irqreturn_t ifi_canfd_isr(int irq, void *dev_id)
static const struct can_bittiming_const ifi_canfd_bittiming_const = {
.name = KBUILD_MODNAME,
.tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */
.tseg1_min = 1, /* Time segment 1 = prop_seg + phase_seg1 */
.tseg1_max = 64,
.tseg2_min = 1, /* Time segment 2 = phase_seg2 */
.tseg2_max = 16,
.tseg2_min = 2, /* Time segment 2 = phase_seg2 */
.tseg2_max = 64,
.sjw_max = 16,
.brp_min = 1,
.brp_max = 1024,
.brp_min = 2,
.brp_max = 256,
.brp_inc = 1,
};
static const struct can_bittiming_const ifi_canfd_data_bittiming_const = {
.name = KBUILD_MODNAME,
.tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */
.tseg1_max = 16,
.tseg2_min = 1, /* Time segment 2 = phase_seg2 */
.tseg2_max = 8,
.sjw_max = 4,
.brp_min = 1,
.brp_max = 32,
.tseg1_min = 1, /* Time segment 1 = prop_seg + phase_seg1 */
.tseg1_max = 64,
.tseg2_min = 2, /* Time segment 2 = phase_seg2 */
.tseg2_max = 64,
.sjw_max = 16,
.brp_min = 2,
.brp_max = 256,
.brp_inc = 1,
};
......@@ -545,32 +563,34 @@ static void ifi_canfd_set_bittiming(struct net_device *ndev)
u32 noniso_arg = 0;
u32 time_off;
if (priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO) {
if ((priv->can.ctrlmode & CAN_CTRLMODE_FD) &&
!(priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO)) {
time_off = IFI_CANFD_TIME_SJW_OFF_ISO;
} else {
noniso_arg = IFI_CANFD_TIME_SET_TIMEB_BOSCH |
IFI_CANFD_TIME_SET_TIMEA_BOSCH |
IFI_CANFD_TIME_SET_PRESC_BOSCH |
IFI_CANFD_TIME_SET_SJW_BOSCH;
time_off = IFI_CANFD_TIME_SJW_OFF_BOSCH;
} else {
time_off = IFI_CANFD_TIME_SJW_OFF_ISO;
}
/* Configure bit timing */
brp = bt->brp - 1;
brp = bt->brp - 2;
sjw = bt->sjw - 1;
tseg1 = bt->prop_seg + bt->phase_seg1 - 1;
tseg2 = bt->phase_seg2 - 1;
tseg2 = bt->phase_seg2 - 2;
writel((tseg2 << IFI_CANFD_TIME_TIMEB_OFF) |
(tseg1 << IFI_CANFD_TIME_TIMEA_OFF) |
(brp << IFI_CANFD_TIME_PRESCALE_OFF) |
(sjw << time_off),
(sjw << time_off) |
noniso_arg,
priv->base + IFI_CANFD_TIME);
/* Configure data bit timing */
brp = dbt->brp - 1;
brp = dbt->brp - 2;
sjw = dbt->sjw - 1;
tseg1 = dbt->prop_seg + dbt->phase_seg1 - 1;
tseg2 = dbt->phase_seg2 - 1;
tseg2 = dbt->phase_seg2 - 2;
writel((tseg2 << IFI_CANFD_TIME_TIMEB_OFF) |
(tseg1 << IFI_CANFD_TIME_TIMEA_OFF) |
(brp << IFI_CANFD_TIME_PRESCALE_OFF) |
......@@ -747,8 +767,7 @@ static netdev_tx_t ifi_canfd_start_xmit(struct sk_buff *skb,
{
struct ifi_canfd_priv *priv = netdev_priv(ndev);
struct canfd_frame *cf = (struct canfd_frame *)skb->data;
u32 txst, txid;
u32 txdlc = 0;
u32 txst, txid, txdlc;
int i;
if (can_dropped_invalid_skb(ndev, skb))
......@@ -766,17 +785,25 @@ static netdev_tx_t ifi_canfd_start_xmit(struct sk_buff *skb,
if (cf->can_id & CAN_EFF_FLAG) {
txid = cf->can_id & CAN_EFF_MASK;
/*
* In case the Extended ID frame is transmitted, the
* standard and extended part of the ID are swapped
* in the register, so swap them back to send the
* correct ID.
*/
txid = (txid >> IFI_CANFD_TXFIFO_ID_ID_XTD_WIDTH) |
((txid & IFI_CANFD_TXFIFO_ID_ID_XTD_MASK) <<
IFI_CANFD_TXFIFO_ID_ID_XTD_OFFSET);
txid |= IFI_CANFD_TXFIFO_ID_IDE;
} else {
txid = cf->can_id & CAN_SFF_MASK;
}
if (priv->can.ctrlmode & (CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO)) {
if (can_is_canfd_skb(skb)) {
txdlc |= IFI_CANFD_TXFIFO_DLC_EDL;
if (cf->flags & CANFD_BRS)
txdlc |= IFI_CANFD_TXFIFO_DLC_BRS;
}
txdlc = can_len2dlc(cf->len);
if ((priv->can.ctrlmode & CAN_CTRLMODE_FD) && can_is_canfd_skb(skb)) {
txdlc |= IFI_CANFD_TXFIFO_DLC_EDL;
if (cf->flags & CANFD_BRS)
txdlc |= IFI_CANFD_TXFIFO_DLC_BRS;
}
if (cf->can_id & CAN_RTR_FLAG)
......@@ -847,7 +874,7 @@ static int ifi_canfd_plat_probe(struct platform_device *pdev)
priv->can.state = CAN_STATE_STOPPED;
priv->can.clock.freq = readl(addr + IFI_CANFD_SYSCLOCK);
priv->can.clock.freq = readl(addr + IFI_CANFD_CANCLOCK);
priv->can.bittiming_const = &ifi_canfd_bittiming_const;
priv->can.data_bittiming_const = &ifi_canfd_data_bittiming_const;
......
......@@ -906,6 +906,7 @@ static const struct of_device_id rcar_can_of_table[] __maybe_unused = {
{ .compatible = "renesas,can-r8a7791" },
{ .compatible = "renesas,rcar-gen1-can" },
{ .compatible = "renesas,rcar-gen2-can" },
{ .compatible = "renesas,rcar-gen3-can" },
{ }
};
MODULE_DEVICE_TABLE(of, rcar_can_of_table);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册