提交 7975d1ee 编写于 作者: S Sreenivasa Honnur 提交者: David S. Miller

vxge: Removed ioremap of unused bar addresses and their references

- Removed ioremap of bar1 address
  Driver needs only bar0 address for register access
- Removed references to bar1 and bar2 addresses
Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e04af024
......@@ -313,14 +313,6 @@ __vxge_hw_device_reg_addr_get(struct __vxge_hw_device *hldev)
hldev->kdfc = (u8 __iomem *)(hldev->bar0 +
VXGE_HW_TOC_GET_KDFC_INITIAL_OFFSET(val64));
break;
case 2:
hldev->kdfc = (u8 __iomem *)(hldev->bar1 +
VXGE_HW_TOC_GET_KDFC_INITIAL_OFFSET(val64));
break;
case 4:
hldev->kdfc = (u8 __iomem *)(hldev->bar2 +
VXGE_HW_TOC_GET_KDFC_INITIAL_OFFSET(val64));
break;
default:
break;
}
......@@ -831,8 +823,6 @@ vxge_hw_device_initialize(
sizeof(struct vxge_hw_device_config));
hldev->bar0 = attr->bar0;
hldev->bar1 = attr->bar1;
hldev->bar2 = attr->bar2;
hldev->pdev = attr->pdev;
hldev->uld_callbacks.link_up = attr->uld_callbacks.link_up;
......
......@@ -682,8 +682,6 @@ struct __vxge_hw_vpath_handle{
* @major_revision: PCI Device major revision
* @minor_revision: PCI Device minor revision
* @bar0: BAR0 virtual address.
* @bar1: BAR1 virtual address.
* @bar2: BAR2 virtual address.
* @pdev: Physical device handle
* @config: Confguration passed by the LL driver at initialization
* @link_state: Link state
......@@ -698,8 +696,6 @@ struct __vxge_hw_device {
u8 major_revision;
u8 minor_revision;
void __iomem *bar0;
void __iomem *bar1;
void __iomem *bar2;
struct pci_dev *pdev;
struct net_device *ndev;
struct vxge_hw_device_config config;
......@@ -788,17 +784,13 @@ struct vxge_hw_device_hw_info {
/**
* struct vxge_hw_device_attr - Device memory spaces.
* @bar0: BAR0 virtual address.
* @bar1: BAR1 virtual address.
* @bar2: BAR2 virtual address.
* @pdev: PCI device object.
*
* Device memory spaces. Includes configuration, BAR0, BAR1, etc. per device
* Device memory spaces. Includes configuration, BAR0 etc. per device
* mapped memories. Also, includes a pointer to OS-specific PCI device object.
*/
struct vxge_hw_device_attr {
void __iomem *bar0;
void __iomem *bar1;
void __iomem *bar2;
struct pci_dev *pdev;
struct vxge_hw_uld_cbs uld_callbacks;
};
......
......@@ -4152,18 +4152,6 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
attr.bar0,
(unsigned long long)pci_resource_start(pdev, 0));
attr.bar1 = pci_ioremap_bar(pdev, 2);
if (!attr.bar1) {
vxge_debug_init(VXGE_ERR,
"%s : cannot remap io memory bar2", __func__);
ret = -ENODEV;
goto _exit3;
}
vxge_debug_ll_config(VXGE_TRACE,
"pci ioremap bar1: %p:0x%llx",
attr.bar1,
(unsigned long long)pci_resource_start(pdev, 2));
status = vxge_hw_device_hw_info_get(attr.bar0,
&ll_config.device_hw_info);
if (status != VXGE_HW_OK) {
......@@ -4171,7 +4159,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
"%s: Reading of hardware info failed."
"Please try upgrading the firmware.", VXGE_DRIVER_NAME);
ret = -EINVAL;
goto _exit4;
goto _exit3;
}
if (ll_config.device_hw_info.fw_version.major !=
......@@ -4181,7 +4169,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
ll_config.device_hw_info.fw_version.major,
VXGE_DRIVER_VERSION_MAJOR);
ret = -EINVAL;
goto _exit4;
goto _exit3;
}
vpath_mask = ll_config.device_hw_info.vpath_mask;
......@@ -4189,7 +4177,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
vxge_debug_ll_config(VXGE_TRACE,
"%s: No vpaths available in device", VXGE_DRIVER_NAME);
ret = -EINVAL;
goto _exit4;
goto _exit3;
}
vxge_debug_ll_config(VXGE_TRACE,
......@@ -4222,7 +4210,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
vxge_debug_ll_config(VXGE_ERR,
"%s: No more vpaths to configure", VXGE_DRIVER_NAME);
ret = 0;
goto _exit4;
goto _exit3;
}
/* Setting driver callbacks */
......@@ -4235,7 +4223,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
vxge_debug_init(VXGE_ERR,
"Failed to initialize device (%d)", status);
ret = -EINVAL;
goto _exit4;
goto _exit3;
}
vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
......@@ -4260,7 +4248,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
if (vxge_device_register(hldev, &ll_config, high_dma, no_of_vpath,
&vdev)) {
ret = -EINVAL;
goto _exit5;
goto _exit4;
}
vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL);
......@@ -4271,7 +4259,6 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
hldev->ndev = vdev->ndev;
vdev->mtu = VXGE_HW_DEFAULT_MTU;
vdev->bar0 = attr.bar0;
vdev->bar1 = attr.bar1;
vdev->max_vpath_supported = max_vpath_supported;
vdev->no_of_vpath = no_of_vpath;
......@@ -4353,7 +4340,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
"%s: mac_addr_list : memory allocation failed",
vdev->ndev->name);
ret = -EPERM;
goto _exit6;
goto _exit5;
}
macaddr = (u8 *)&entry->macaddr;
memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN);
......@@ -4370,16 +4357,14 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
return 0;
_exit6:
_exit5:
for (i = 0; i < vdev->no_of_vpath; i++)
vxge_free_mac_add_list(&vdev->vpaths[i]);
vxge_device_unregister(hldev);
_exit5:
_exit4:
pci_disable_sriov(pdev);
vxge_hw_device_terminate(hldev);
_exit4:
iounmap(attr.bar1);
_exit3:
iounmap(attr.bar0);
_exit2:
......@@ -4438,7 +4423,6 @@ vxge_remove(struct pci_dev *pdev)
kfree(vdev->vpaths);
iounmap(vdev->bar0);
iounmap(vdev->bar1);
pci_disable_sriov(pdev);
......
......@@ -363,7 +363,6 @@ struct vxgedev {
struct __vxge_hw_vpath_handle *vp_handles[VXGE_HW_MAX_VIRTUAL_PATHS];
void __iomem *bar0;
void __iomem *bar1;
struct vxge_sw_stats stats;
int mtu;
/* Below variables are used for vpath selection to transmit a packet */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册