提交 792afe63 编写于 作者: K Keerthy 提交者: Linus Walleij

dt-bindings: gpio: davinci: Add keystone-k2g compatible

The patch adds keystone-k2g compatible, specific properties and
an example. The patch also adds the details of supported SoCs
for each compatible.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 659d8a62
Davinci/Keystone GPIO controller bindings
Required Properties:
- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio"
- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs
"ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L,
66AK2E SoCs
"ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G
- reg: Physical base address of the controller and the size of memory mapped
registers.
......@@ -20,7 +23,21 @@ Required Properties:
- ti,ngpio: The number of GPIO pins supported.
- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt
line to processor.
line to processor.
- clocks: Should contain the device's input clock, and should be defined as per
the appropriate clock bindings consumer usage in,
Documentation/devicetree/bindings/clock/keystone-gate.txt
for 66AK2HK/66AK2L/66AK2E SoCs or,
Documentation/devicetree/bindings/clock/ti,sci-clk.txt
for 66AK2G SoCs
- clock-names: Name should be "gpio";
Currently clock-names and clocks are needed for all keystone 2 platforms
Davinci platforms do not have DT clocks as of now.
The GPIO controller also acts as an interrupt controller. It uses the default
two cells specifier as described in Documentation/devicetree/bindings/
......@@ -60,3 +77,73 @@ leds {
...
};
};
Example for 66AK2G:
gpio0: gpio@2603000 {
compatible = "ti,k2g-gpio", "ti,keystone-gpio";
reg = <0x02603000 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <144>;
ti,davinci-gpio-unbanked = <0>;
clocks = <&k2g_clks 0x001b 0x0>;
clock-names = "gpio";
};
Example for 66AK2HK/66AK2L/66AK2E:
gpio0: gpio@260bf00 {
compatible = "ti,keystone-gpio";
reg = <0x0260bf00 0x100>;
gpio-controller;
#gpio-cells = <2>;
/* HW Interrupts mapped to GPIO pins */
interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkgpio>;
clock-names = "gpio";
ti,ngpio = <32>;
ti,davinci-gpio-unbanked = <32>;
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册