提交 787b121d 编写于 作者: M Mark Brown

Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328',...

Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', 'asoc/fix/fsl', 'asoc/fix/fsl-sai' and 'asoc/fix/intel' into asoc-linus
......@@ -205,18 +205,18 @@ static const struct snd_kcontrol_new es8328_right_line_controls =
/* Left Mixer */
static const struct snd_kcontrol_new es8328_left_mixer_controls[] = {
SOC_DAPM_SINGLE("Playback Switch", ES8328_DACCONTROL17, 8, 1, 0),
SOC_DAPM_SINGLE("Left Bypass Switch", ES8328_DACCONTROL17, 7, 1, 0),
SOC_DAPM_SINGLE("Right Playback Switch", ES8328_DACCONTROL18, 8, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", ES8328_DACCONTROL18, 7, 1, 0),
SOC_DAPM_SINGLE("Playback Switch", ES8328_DACCONTROL17, 7, 1, 0),
SOC_DAPM_SINGLE("Left Bypass Switch", ES8328_DACCONTROL17, 6, 1, 0),
SOC_DAPM_SINGLE("Right Playback Switch", ES8328_DACCONTROL18, 7, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", ES8328_DACCONTROL18, 6, 1, 0),
};
/* Right Mixer */
static const struct snd_kcontrol_new es8328_right_mixer_controls[] = {
SOC_DAPM_SINGLE("Left Playback Switch", ES8328_DACCONTROL19, 8, 1, 0),
SOC_DAPM_SINGLE("Left Bypass Switch", ES8328_DACCONTROL19, 7, 1, 0),
SOC_DAPM_SINGLE("Playback Switch", ES8328_DACCONTROL20, 8, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", ES8328_DACCONTROL20, 7, 1, 0),
SOC_DAPM_SINGLE("Left Playback Switch", ES8328_DACCONTROL19, 7, 1, 0),
SOC_DAPM_SINGLE("Left Bypass Switch", ES8328_DACCONTROL19, 6, 1, 0),
SOC_DAPM_SINGLE("Playback Switch", ES8328_DACCONTROL20, 7, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", ES8328_DACCONTROL20, 6, 1, 0),
};
static const char * const es8328_pga_sel[] = {
......
......@@ -681,8 +681,8 @@ static int davinci_mcasp_set_tdm_slot(struct snd_soc_dai *dai,
}
mcasp->tdm_slots = slots;
mcasp->tdm_mask[SNDRV_PCM_STREAM_PLAYBACK] = rx_mask;
mcasp->tdm_mask[SNDRV_PCM_STREAM_CAPTURE] = tx_mask;
mcasp->tdm_mask[SNDRV_PCM_STREAM_PLAYBACK] = tx_mask;
mcasp->tdm_mask[SNDRV_PCM_STREAM_CAPTURE] = rx_mask;
mcasp->slot_width = slot_width;
return davinci_mcasp_set_ch_constraints(mcasp);
......@@ -908,6 +908,14 @@ static int mcasp_i2s_hw_param(struct davinci_mcasp *mcasp, int stream,
mcasp_set_bits(mcasp, DAVINCI_MCASP_RXFMT_REG, busel | RXORD);
mcasp_mod_bits(mcasp, DAVINCI_MCASP_RXFMCTL_REG,
FSRMOD(total_slots), FSRMOD(0x1FF));
/*
* If McASP is set to be TX/RX synchronous and the playback is
* not running already we need to configure the TX slots in
* order to have correct FSX on the bus
*/
if (mcasp_is_synchronous(mcasp) && !mcasp->channels)
mcasp_mod_bits(mcasp, DAVINCI_MCASP_TXFMCTL_REG,
FSXMOD(total_slots), FSXMOD(0x1FF));
}
return 0;
......
......@@ -283,6 +283,8 @@ config SND_SOC_IMX_MC13783
config SND_SOC_FSL_ASOC_CARD
tristate "Generic ASoC Sound Card with ASRC support"
depends on OF && I2C
# enforce SND_SOC_FSL_ASOC_CARD=m if SND_AC97_CODEC=m:
depends on SND_AC97_CODEC || SND_AC97_CODEC=n
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_PCM_DMA
select SND_SOC_FSL_ESAI
......
......@@ -454,7 +454,8 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
* Rx sync with Tx clocks: Clear SYNC for Tx, set it for Rx.
* Tx sync with Rx clocks: Clear SYNC for Rx, set it for Tx.
*/
regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC, 0);
regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
sai->synchronous[TX] ? FSL_SAI_CR2_SYNC : 0);
regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC,
sai->synchronous[RX] ? FSL_SAI_CR2_SYNC : 0);
......
......@@ -144,7 +144,7 @@ config SND_SOC_INTEL_SKYLAKE
config SND_SOC_INTEL_SKL_RT286_MACH
tristate "ASoC Audio driver for SKL with RT286 I2S mode"
depends on X86 && ACPI
depends on X86 && ACPI && I2C
select SND_SOC_INTEL_SST
select SND_SOC_INTEL_SKYLAKE
select SND_SOC_RT286
......
......@@ -1240,6 +1240,7 @@ int skl_tplg_init(struct snd_soc_platform *platform, struct hdac_ext_bus *ebus)
*/
ret = snd_soc_tplg_component_load(&platform->component,
&skl_tplg_ops, fw, 0);
release_firmware(fw);
if (ret < 0) {
dev_err(bus->dev, "tplg component load failed%d\n", ret);
return -EINVAL;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册