提交 778b28b4 编写于 作者: R Russell King 提交者: Mark Brown

regulator: core: convert to use gpio_desc internally

Convert the regulator GPIO handling to use a gpio descriptor rather than
numbers.  This allows us to revise the interfaces to permit all GPIOs
to be used with the regulator core.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NMark Brown <broonie@linaro.org>
上级 7171511e
......@@ -24,6 +24,7 @@
#include <linux/suspend.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
......@@ -77,7 +78,7 @@ struct regulator_map {
*/
struct regulator_enable_gpio {
struct list_head list;
int gpio;
struct gpio_desc *gpiod;
u32 enable_count; /* a number of enabled shared GPIO */
u32 request_count; /* a number of requested shared GPIO */
unsigned int ena_gpio_invert:1;
......@@ -1660,10 +1661,13 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
const struct regulator_config *config)
{
struct regulator_enable_gpio *pin;
struct gpio_desc *gpiod;
int ret;
gpiod = gpio_to_desc(config->ena_gpio);
list_for_each_entry(pin, &regulator_ena_gpio_list, list) {
if (pin->gpio == config->ena_gpio) {
if (pin->gpiod == gpiod) {
rdev_dbg(rdev, "GPIO %d is already used\n",
config->ena_gpio);
goto update_ena_gpio_to_rdev;
......@@ -1682,7 +1686,7 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
return -ENOMEM;
}
pin->gpio = config->ena_gpio;
pin->gpiod = gpiod;
pin->ena_gpio_invert = config->ena_gpio_invert;
list_add(&pin->list, &regulator_ena_gpio_list);
......@@ -1701,10 +1705,10 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev)
/* Free the GPIO only in case of no use */
list_for_each_entry_safe(pin, n, &regulator_ena_gpio_list, list) {
if (pin->gpio == rdev->ena_pin->gpio) {
if (pin->gpiod == rdev->ena_pin->gpiod) {
if (pin->request_count <= 1) {
pin->request_count = 0;
gpio_free(pin->gpio);
gpiod_put(pin->gpiod);
list_del(&pin->list);
kfree(pin);
} else {
......@@ -1732,8 +1736,8 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable)
if (enable) {
/* Enable GPIO at initial use */
if (pin->enable_count == 0)
gpio_set_value_cansleep(pin->gpio,
!pin->ena_gpio_invert);
gpiod_set_value_cansleep(pin->gpiod,
!pin->ena_gpio_invert);
pin->enable_count++;
} else {
......@@ -1744,8 +1748,8 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable)
/* Disable GPIO if not used */
if (pin->enable_count <= 1) {
gpio_set_value_cansleep(pin->gpio,
pin->ena_gpio_invert);
gpiod_set_value_cansleep(pin->gpiod,
pin->ena_gpio_invert);
pin->enable_count = 0;
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册