提交 777a4475 编写于 作者: D David S. Miller

[SPARC64]: Unify timer interrupt handler.

Things were scattered all over the place, split between
SMP and non-SMP.

Unify it all so that dyntick support is easier to add.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 a58c9f3c
......@@ -589,32 +589,6 @@ void ack_bad_irq(unsigned int virt_irq)
ino, virt_irq);
}
#ifndef CONFIG_SMP
extern irqreturn_t timer_interrupt(int, void *);
void timer_irq(int irq, struct pt_regs *regs)
{
unsigned long clr_mask = 1 << irq;
unsigned long tick_mask = tick_ops->softint_mask;
struct pt_regs *old_regs;
if (get_softint() & tick_mask) {
irq = 0;
clr_mask = tick_mask;
}
clear_softint(clr_mask);
old_regs = set_irq_regs(regs);
irq_enter();
kstat_this_cpu.irqs[0]++;
timer_interrupt(irq, NULL);
irq_exit();
set_irq_regs(old_regs);
}
#endif
void handler_irq(int irq, struct pt_regs *regs)
{
struct ino_bucket *bucket;
......
......@@ -45,7 +45,7 @@
extern void calibrate_delay(void);
/* Please don't make this stuff initdata!!! --DaveM */
static unsigned char boot_cpu_id;
unsigned char boot_cpu_id;
cpumask_t cpu_online_map __read_mostly = CPU_MASK_NONE;
cpumask_t phys_cpu_present_map __read_mostly = CPU_MASK_NONE;
......@@ -81,8 +81,6 @@ void __init smp_store_cpu_info(int id)
struct device_node *dp;
int def;
/* multiplier and counter set by
smp_setup_percpu_timer() */
cpu_data(id).udelay_val = loops_per_jiffy;
cpu_find_by_mid(id, &dp);
......@@ -1180,75 +1178,10 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs)
preempt_enable();
}
#define prof_multiplier(__cpu) cpu_data(__cpu).multiplier
#define prof_counter(__cpu) cpu_data(__cpu).counter
void smp_percpu_timer_interrupt(struct pt_regs *regs)
{
unsigned long compare, tick, pstate;
int cpu = smp_processor_id();
int user = user_mode(regs);
struct pt_regs *old_regs;
/*
* Check for level 14 softint.
*/
{
unsigned long tick_mask = tick_ops->softint_mask;
if (!(get_softint() & tick_mask)) {
extern void handler_irq(int, struct pt_regs *);
handler_irq(14, regs);
return;
}
clear_softint(tick_mask);
}
old_regs = set_irq_regs(regs);
do {
profile_tick(CPU_PROFILING);
if (!--prof_counter(cpu)) {
irq_enter();
if (cpu == boot_cpu_id) {
kstat_this_cpu.irqs[0]++;
timer_tick_interrupt(regs);
}
update_process_times(user);
irq_exit();
prof_counter(cpu) = prof_multiplier(cpu);
}
/* Guarantee that the following sequences execute
* uninterrupted.
*/
__asm__ __volatile__("rdpr %%pstate, %0\n\t"
"wrpr %0, %1, %%pstate"
: "=r" (pstate)
: "i" (PSTATE_IE));
compare = tick_ops->add_compare(current_tick_offset);
tick = tick_ops->get_tick();
/* Restore PSTATE_IE. */
__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
: /* no outputs */
: "r" (pstate));
} while (time_after_eq(tick, compare));
set_irq_regs(old_regs);
}
static void __init smp_setup_percpu_timer(void)
{
int cpu = smp_processor_id();
unsigned long pstate;
prof_counter(cpu) = prof_multiplier(cpu) = 1;
/* Guarantee that the following sequences execute
* uninterrupted.
*/
......@@ -1269,28 +1202,12 @@ void __init smp_tick_init(void)
{
boot_cpu_id = hard_smp_processor_id();
current_tick_offset = timer_tick_offset;
prof_counter(boot_cpu_id) = prof_multiplier(boot_cpu_id) = 1;
}
/* /proc/profile writes can call this, don't __init it please. */
static DEFINE_SPINLOCK(prof_setup_lock);
int setup_profiling_timer(unsigned int multiplier)
{
unsigned long flags;
int i;
if ((!multiplier) || (timer_tick_offset / multiplier) < 1000)
return -EINVAL;
spin_lock_irqsave(&prof_setup_lock, flags);
for_each_possible_cpu(i)
prof_multiplier(i) = multiplier;
current_tick_offset = (timer_tick_offset / multiplier);
spin_unlock_irqrestore(&prof_setup_lock, flags);
return 0;
return -EINVAL;
}
static void __init smp_tune_scheduling(void)
......
......@@ -31,6 +31,7 @@
#include <linux/profile.h>
#include <linux/miscdevice.h>
#include <linux/rtc.h>
#include <linux/kernel_stat.h>
#include <asm/oplib.h>
#include <asm/mostek.h>
......@@ -423,12 +424,6 @@ static struct sparc64_tick_ops hbtick_operations __read_mostly = {
.softint_mask = 1UL << 0,
};
/* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
*
* NOTE: On SUN5 systems the ticker interrupt comes in using 2
* interrupts, one at level14 and one with softint bit 0.
*/
unsigned long timer_tick_offset __read_mostly;
static unsigned long timer_ticks_per_nsec_quotient __read_mostly;
......@@ -487,18 +482,27 @@ void notify_arch_cmos_timer(void)
mod_timer(&sync_cmos_timer, jiffies + 1);
}
irqreturn_t timer_interrupt(int irq, void *dev_id)
void timer_interrupt(int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
unsigned long ticks, compare, pstate;
unsigned long tick_mask = tick_ops->softint_mask;
clear_softint(tick_mask);
irq_enter();
write_seqlock(&xtime_lock);
kstat_this_cpu.irqs[0]++;
do {
#ifndef CONFIG_SMP
profile_tick(CPU_PROFILING);
update_process_times(user_mode(get_irq_regs()));
#endif
do_timer(1);
if (smp_processor_id() == boot_cpu_id) {
write_seqlock(&xtime_lock);
do_timer(1);
write_sequnlock(&xtime_lock);
}
/* Guarantee that the following sequences execute
* uninterrupted.
......@@ -515,24 +519,13 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
: /* no outputs */
: "r" (pstate));
} while (time_after_eq(ticks, compare));
} while (unlikely(time_after_eq(ticks, compare)));
write_sequnlock(&xtime_lock);
irq_exit();
return IRQ_HANDLED;
set_irq_regs(old_regs);
}
#ifdef CONFIG_SMP
void timer_tick_interrupt(struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
do_timer(1);
write_sequnlock(&xtime_lock);
}
#endif
/* Kick start a stopped clock (procedure from the Sun NVRAM/hostid FAQ). */
static void __init kick_start_clock(void)
{
......
......@@ -60,11 +60,7 @@ tl0_irq4: BTRAP(0x44)
tl0_irq5: TRAP_IRQ(handler_irq, 5)
tl0_irq6: BTRAP(0x46) BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
tl0_irq10: BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
#ifndef CONFIG_SMP
tl0_irq14: TRAP_IRQ(timer_irq, 14)
#else
tl0_irq14: TICK_SMP_IRQ
#endif
tl0_irq14: TRAP_IRQ(timer_interrupt, 14)
tl0_irq15: TRAP_IRQ(handler_irq, 15)
tl0_resv050: BTRAP(0x50) BTRAP(0x51) BTRAP(0x52) BTRAP(0x53) BTRAP(0x54) BTRAP(0x55)
tl0_resv056: BTRAP(0x56) BTRAP(0x57) BTRAP(0x58) BTRAP(0x59) BTRAP(0x5a) BTRAP(0x5b)
......
......@@ -17,8 +17,8 @@
typedef struct {
/* Dcache line 1 */
unsigned int __softirq_pending; /* must be 1st, see rtrap.S */
unsigned int multiplier;
unsigned int counter;
unsigned int __pad0_1;
unsigned int __pad0_2;
unsigned int __pad1;
unsigned long clock_tick; /* %tick's per second */
unsigned long udelay_val;
......
......@@ -42,15 +42,15 @@ extern int hard_smp_processor_id(void);
#define raw_smp_processor_id() (current_thread_info()->cpu)
extern void smp_setup_cpu_possible_map(void);
extern unsigned char boot_cpu_id;
#endif /* !(__ASSEMBLY__) */
#else
#define smp_setup_cpu_possible_map() do { } while (0)
#define boot_cpu_id (0)
#endif /* !(CONFIG_SMP) */
#define NO_PROC_ID 0xFF
#endif /* !(_SPARC64_SMP_H) */
......@@ -157,23 +157,6 @@
ba,a,pt %xcc, rtrap_irq; \
.previous;
#define TICK_SMP_IRQ \
rdpr %pil, %g2; \
wrpr %g0, 15, %pil; \
sethi %hi(1f-4), %g7; \
ba,pt %xcc, etrap_irq; \
or %g7, %lo(1f-4), %g7; \
nop; \
nop; \
nop; \
.subsection 2; \
1: call trace_hardirqs_off; \
nop; \
call smp_percpu_timer_interrupt; \
add %sp, PTREGS_OFF, %o0; \
ba,a,pt %xcc, rtrap_irq; \
.previous;
#else
#define TRAP_IRQ(routine, level) \
......@@ -186,16 +169,6 @@
add %sp, PTREGS_OFF, %o1; \
ba,a,pt %xcc, rtrap_irq;
#define TICK_SMP_IRQ \
rdpr %pil, %g2; \
wrpr %g0, 15, %pil; \
sethi %hi(109f), %g7; \
ba,pt %xcc, etrap_irq; \
109: or %g7, %lo(109b), %g7; \
call smp_percpu_timer_interrupt; \
add %sp, PTREGS_OFF, %o0; \
ba,a,pt %xcc, rtrap_irq;
#endif
#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册