Merge tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control bulk updates from Linus Walleij:
 "New drivers:

   - Qualcomm SDM845: this is their new flagship SoC platform which
     seems to be targeted at premium mobile handsets.

   - Renesas R-Car M3-N SoC.

   - Renesas R8A77980 SoC.

   - NXP (ex Freescale) i.MX 6SLL SoC.

   - Mediatek MT2712 SoC.

   - Allwinner H6 SoC.

  Improvements:

   - Uniphier adds a few new functions and pins.

   - Renesas refactorings and additional pin definitions.

   - Improved pin groups for Axis Artpec6.

  Cleanup:

   - Drop the TZ1090 drivers. This platform is no longer maintained and
     is being deleted.

   - Drop ST-Ericsson U8540/U9540 support as this was never
     productified.

   - Overall minor fixes and janitorial"

* tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: uniphier: add UART hardware flow control pin-mux settings
  pinctrl: sunxi: add support for the Allwinner H6 main pin controller
  pinctrl: sunxi: change irq_bank_base to irq_bank_map
  pinctrl: sunxi: introduce IRQ bank conversion function
  pinctrl: sunxi: refactor irq related register function to have desc
  pinctrl: msm8998: Remove owner assignment from platform_driver
  pinctrl: uniphier: divide I2S and S/PDIF audio out pin-mux group
  pinctrl: uniphier: add PXs2 Audio in/out pin-mux settings
  pinctrl/amd: poll InterruptEnable bits in enable_irq
  pinctrl: ocelot: fix gpio direction
  pinctrl: mtk: fix check warnings.
  pintcrl: mtk: support bias-disable of generic and special pins simultaneously
  pinctrl: add mt2712 pinctrl driver
  pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0
  pinctrl: imx: Add pinctrl driver support for imx6sll
  dt-bindings: imx: update pinctrl doc for imx6sll
  pinctrl: intel: Implement intel_gpio_get_direction callback
  pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency
  pinctrl: mediatek: mtk-common: use true and false for boolean values
  pinctrl: sunxi: always look for apb block
  ...

Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt

+Actions Semi S900 Pin Controller
+
+This binding describes the pin controller found in the S900 SoC.
+
+Required Properties:
+
+- compatible:   Should be "actions,s900-pinctrl"
+- reg:          Should contain the register base address and size of
+                the pin controller.
+- clocks:       phandle of the clock feeding the pin controller
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+Pinmux functions are available only for the pin groups while pinconf
+parameters are available for both pin groups and individual pins.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+Required Properties:
+
+- pins:           An array of strings, each string containing the name of a pin.
+                  These pins are used for selecting the pull control and schmitt
+                  trigger parameters. The following are the list of pins
+                  available:
+
+                  eth_txd0, eth_txd1, eth_txen, eth_rxer, eth_crs_dv,
+                  eth_rxd1, eth_rxd0, eth_ref_clk, eth_mdc, eth_mdio,
+                  sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, i2s_lrclk0,
+                  i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1,
+                  pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, eram_a5,
+                  eram_a6, eram_a7, eram_a8, eram_a9, eram_a10, eram_a11,
+                  lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
+                  lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan,
+                  lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp,
+                  lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean,
+                  sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, sd1_d1,
+                  sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
+                  spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
+                  uart0_tx, uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb,
+                  uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, uart4_rx,
+                  uart4_tx, i2c0_sclk, i2c0_sdata, i2c1_sclk, i2c1_sdata,
+                  i2c2_sclk, i2c2_sdata, csi0_dn0, csi0_dp0, csi0_dn1,
+                  csi0_dp1, csi0_cn, csi0_cp, csi0_dn2, csi0_dp2, csi0_dn3,
+                  csi0_dp3, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp,
+                  dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sensor0_pclk,
+                  csi1_dn0,csi1_dp0,csi1_dn1, csi1_dp1, csi1_cn, csi1_cp,
+                  sensor0_ckout, nand0_d0, nand0_d1, nand0_d2, nand0_d3,
+                  nand0_d4, nand0_d5, nand0_d6, nand0_d7, nand0_dqs,
+                  nand0_dqsn, nand0_ale, nand0_cle, nand0_ceb0, nand0_ceb1,
+                  nand0_ceb2, nand0_ceb3, nand1_d0, nand1_d1, nand1_d2,
+                  nand1_d3, nand1_d4, nand1_d5, nand1_d6, nand1_d7, nand1_dqs,
+                  nand1_dqsn, nand1_ale, nand1_cle, nand1_ceb0, nand1_ceb1,
+                  nand1_ceb2, nand1_ceb3, sgpio0, sgpio1, sgpio2, sgpio3
+
+- groups:         An array of strings, each string containing the name of a pin
+                  group. These pin groups are used for selecting the pinmux
+                  functions.
+
+                  lvds_oxx_uart4_mfp, rmii_mdc_mfp, rmii_mdio_mfp, sirq0_mfp,
+                  sirq1_mfp, rmii_txd0_mfp, rmii_txd1_mfp, rmii_txen_mfp,
+                  rmii_rxer_mfp, rmii_crs_dv_mfp, rmii_rxd1_mfp, rmii_rxd0_mfp,
+                  rmii_ref_clk_mfp, i2s_d0_mfp, i2s_d1_mfp, i2s_lr_m_clk0_mfp,
+                  i2s_bclk0_mfp, i2s_bclk1_mclk1_mfp, pcm1_in_out_mfp,
+                  pcm1_clk_mfp, pcm1_sync_mfp, eram_a5_mfp, eram_a6_mfp,
+                  eram_a7_mfp, eram_a8_mfp, eram_a9_mfp, eram_a10_mfp,
+                  eram_a11_mfp, lvds_oep_odn_mfp, lvds_ocp_obn_mfp,
+                  lvds_oap_oan_mfp, lvds_e_mfp, spi0_sclk_mosi_mfp, spi0_ss_mfp,
+                  spi0_miso_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
+                  uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
+                  sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_clk_mfp,
+                  uart0_rx_mfp, nand0_d0_ceb3_mfp, uart0_tx_mfp, i2c0_mfp,
+                  csi0_cn_cp_mfp, csi0_dn0_dp3_mfp, csi1_dn0_cp_mfp,
+                  dsi_dp3_dn1_mfp, dsi_cp_dn0_mfp, dsi_dp2_dn2_mfp,
+                  nand1_d0_ceb1_mfp, nand1_ceb3_mfp, nand1_ceb0_mfp,
+                  csi1_dn0_dp0_mfp, uart4_rx_tx_mfp
+
+
+                  These pin groups are used for selecting the drive strength
+                  parameters.
+
+                  sgpio3_drv, sgpio2_drv, sgpio1_drv, sgpio0_drv,
+                  rmii_tx_d0_d1_drv, rmii_txen_rxer_drv, rmii_crs_dv_drv,
+                  rmii_rx_d1_d0_drv, rmii_ref_clk_drv, rmii_mdc_mdio_drv,
+                  sirq_0_1_drv, sirq2_drv, i2s_d0_d1_drv, i2s_lr_m_clk0_drv,
+                  i2s_blk1_mclk1_drv, pcm1_in_out_drv, lvds_oap_oan_drv,
+                  lvds_oep_odn_drv, lvds_ocp_obn_drv, lvds_e_drv, sd0_d3_d0_drv,
+                  sd1_d3_d0_drv, sd0_sd1_cmd_clk_drv, spi0_sclk_mosi_drv,
+                  spi0_ss_miso_drv, uart0_rx_tx_drv, uart4_rx_tx_drv, uart2_drv,
+                  uart3_drv, i2c0_drv, i2c1_drv, i2c2_drv, sensor0_drv
+
+                  These pin groups are used for selecting the slew rate
+                  parameters.
+
+                  sgpio3_sr, sgpio2_sr, sgpio1_sr, sgpio0_sr, rmii_tx_d0_d1_sr,
+                  rmii_txen_rxer_sr, rmii_crs_dv_sr, rmii_rx_d1_d0_sr,
+                  rmii_ref_clk_sr, rmii_mdc_mdio_sr, sirq_0_1_sr, sirq2_sr,
+                  i2s_do_d1_sr, i2s_lr_m_clk0_sr, i2s_bclk0_mclk1_sr,
+                  pcm1_in_out_sr, sd1_d3_d0_sr, sd0_sd1_clk_cmd_sr,
+                  spi0_sclk_mosi_sr, spi0_ss_miso_sr, uart0_rx_tx_sr,
+                  uart4_rx_tx_sr, uart2_sr, uart3_sr, i2c0_sr, i2c1_sr, i2c2_sr,
+                  sensor0_sr
+
+- function:       An array of strings, each string containing the name of the
+                  pinmux functions. These functions can only be selected by
+                  the corresponding pin groups. The following are the list of
+                  pinmux functions available:
+
+                  eram, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
+                  uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1,
+                  pcm0, pcm1, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, sd0,
+                  sd1, sd2, sd3, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, lvds,
+                  usb30, usb20, gpu, mipi_csi0, mipi_csi1, mipi_dsi, nand0,
+                  nand1, spdif, sirq0, sirq1, sirq2
+
+Optional Properties:
+
+- bias-bus-hold:  No arguments. The specified pins should retain the previous
+                  state value.
+- bias-high-impedance: No arguments. The specified pins should be configured
+                  as high impedance.
+- bias-pull-down: No arguments. The specified pins should be configured as
+                  pull down.
+- bias-pull-up:   No arguments. The specified pins should be configured as
+                  pull up.
+- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
+                  pins
+- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
+                  pins
+- slew-rate:      Integer. Sets slew rate for the specified pins.
+                  Valid values are:
+                  <0>  - Slow
+                  <1>  - Fast
+- drive-strength: Integer. Selects the drive strength for the specified
+                  pins in mA.
+                  Valid values are:
+                  <2>
+                  <4>
+                  <8>
+                  <12>
+
+Example:
+
+          pinctrl: pinctrl@e01b0000 {
+                  compatible = "actions,s900-pinctrl";
+                  reg = <0x0 0xe01b0000 0x0 0x1000>;
+                  clocks = <&cmu CLK_GPIO>;
+
+                  uart2-default: uart2-default {
+                          pinmux {
+                                  groups = "lvds_oep_odn_mfp";
+                                  function = "uart2";
+                          };
+                          pinconf {
+                                  groups = "lvds_oep_odn_drv";
+                                  drive-strength = <12>;
+                          };
+                  };
+          };

Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt

@@ -27,6 +27,7 @@ Required properties:
   "allwinner,sun50i-a64-pinctrl"
   "allwinner,sun50i-a64-r-pinctrl"
   "allwinner,sun50i-h5-pinctrl"
+  "allwinner,sun50i-h6-pinctrl"
   "nextthing,gr8-pinctrl"
 
 - reg: Should contain the register physical address and length for the

Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt

@@ -19,8 +19,10 @@ Required subnode-properties:
 	Available functions and groups (function: group0, group1...):
 		gpio: cpuclkoutgrp0, udlclkoutgrp0, i2c1grp0, i2c2grp0,
 		      i2c3grp0, i2s0grp0, i2s1grp0, i2srefclkgrp0, spi0grp0,
-		      spi1grp0, pciedebuggrp0, uart0grp0, uart0grp1, uart1grp0,
-		      uart2grp0, uart2grp1, uart3grp0, uart4grp0, uart5grp0
+		      spi1grp0, pciedebuggrp0, uart0grp0, uart0grp1, uart0grp2,
+		      uart1grp0, uart1grp1, uart2grp0, uart2grp1, uart2grp2,
+		      uart3grp0, uart4grp0, uart4grp1, uart5grp0, uart5grp1,
+		      uart5nocts
 		cpuclkout: cpuclkoutgrp0
 		udlclkout: udlclkoutgrp0
 		i2c1: i2c1grp0
@@ -32,12 +34,12 @@ Required subnode-properties:
 		spi0: spi0grp0
 		spi1: spi1grp0
 		pciedebug: pciedebuggrp0
-		uart0: uart0grp0, uart0grp1
-		uart1: uart1grp0
-		uart2: uart2grp0, uart2grp1
+		uart0: uart0grp0, uart0grp1, uart0grp2
+		uart1: uart1grp0, uart1grp1
+		uart2: uart2grp0, uart2grp1, uart2grp2
 		uart3: uart3grp0
-		uart4: uart4grp0
-		uart5: uart5grp0
+		uart4: uart4grp0, uart4grp1
+		uart5: uart5grp0, uart5grp1, uart5nocts
 		nand: nandgrp0
 		sdio0: sdio0grp0
 		sdio1: sdio1grp0

Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt

+* Freescale i.MX6 SLL IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sll-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  imx6sll-pinfunc.h under device tree source folder.  The last integer CONFIG is
+  the pad setting value like pull-up on this pin.  Please refer to i.MX6SLL
+  Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE			(1 << 22)
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (0 << 6)
+PAD_CTL_SPEED_MED               (1 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_260ohm              (1 << 3)
+PAD_CTL_DSE_130ohm              (2 << 3)
+PAD_CTL_DSE_87ohm               (3 << 3)
+PAD_CTL_DSE_65ohm               (4 << 3)
+PAD_CTL_DSE_52ohm               (5 << 3)
+PAD_CTL_DSE_43ohm               (6 << 3)
+PAD_CTL_DSE_37ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
+
+Refer to imx6sll-pinfunc.h in device tree source folder for all available
+imx6sll PIN_FUNC_ID.

Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt

-ImgTec TZ1090 PDC pin controller
-
-Required properties:
-- compatible: "img,tz1090-pdc-pinctrl"
-- reg: Should contain the register physical address and length of the
-  SOC_GPIO_CONTROL registers in the PDC register region.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-TZ1090-PDC's pin configuration nodes act as a container for an arbitrary number
-of subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function. For this reason, even seemingly boolean
-values are actually tristates in this binding: unspecified, off, or on.
-Unspecified is represented as an absent property, and off/on are represented as
-integer values 0 and 1.
-
-Required subnode-properties:
-- tz1090,pins : An array of strings. Each string contains the name of a pin or
-  group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- tz1090,function: A string containing the name of the function to mux to the
-  pin or group. Valid values for function names are listed below, including
-  which pingroups can be muxed to them.
-- supported generic pinconfig properties (for further details see
-  Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt):
-  - bias-disable
-  - bias-high-impedance
-  - bias-bus-hold
-  - bias-pull-up
-  - bias-pull-down
-  - input-schmitt-enable
-  - input-schmitt-disable
-  - drive-strength: Integer, control drive strength of pins in mA.
-      2: 2mA
-      4: 4mA
-      8: 8mA
-      12: 12mA
-  - low-power-enable: Flag, power-on-start weak pull-down for invalid power.
-  - low-power-disable: Flag, power-on-start weak pull-down disabled.
-
-Note that many of these properties are only valid for certain specific pins
-or groups. See the TZ1090 TRM for complete details regarding which groups
-support which functionality. The Linux pinctrl driver may also be a useful
-reference.
-
-Valid values for pin and group names are:
-
-  pins:
-
-    These all support bias-high-impediance, bias-pull-up, bias-pull-down, and
-    bias-bus-hold (which can also be provided to any of the groups below to set
-    it for all gpio pins in that group).
-
-    gpio0, gpio1, sys_wake0, sys_wake1, sys_wake2, ir_data, ext_power.
-
-  mux groups:
-
-    These all support function.
-
-    gpio0
-        pins:       gpio0.
-        function:   ir_mod_stable_out.
-    gpio1
-        pins:       gpio1.
-        function:   ir_mod_power_out.
-
-  drive groups:
-
-    These support input-schmitt-enable, input-schmitt-disable,
-    drive-strength, low-power-enable, and low-power-disable.
-
-    pdc
-        pins:   gpio0, gpio1, sys_wake0, sys_wake1, sys_wake2, ir_data,
-                ext_power.
-
-Example:
-
-	pinctrl_pdc: pinctrl@2006500 {
-		#gpio-range-cells = <3>;
-		compatible = "img,tz1090-pdc-pinctrl";
-		reg = <0x02006500 0x100>;
-	};
-
-Example board file extracts:
-
-	&pinctrl_pdc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&syswake_default>;
-
-		syswake_default: syswakes {
-			syswake_cfg {
-				tz1090,pins =	"sys_wake0",
-						"sys_wake1",
-						"sys_wake2";
-				pull-up;
-			};
-		};
-		irmod_default: irmod {
-			gpio0_cfg {
-				tz1090,pins =	"gpio0";
-				tz1090,function = "ir_mod_stable_out";
-			};
-			gpio1_cfg {
-				tz1090,pins =	"gpio1";
-				tz1090,function = "ir_mod_power_out";
-			};
-		};
-	};
-
-	ir: ir@2006200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&irmod_default>;
-	};

Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt

-ImgTec TZ1090 pin controller
-
-Required properties:
-- compatible: "img,tz1090-pinctrl"
-- reg: Should contain the register physical address and length of the pad
-  configuration registers (CR_PADS_* and CR_IF_CTL0).
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-TZ1090's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function. For this reason, even seemingly boolean
-values are actually tristates in this binding: unspecified, off, or on.
-Unspecified is represented as an absent property, and off/on are represented as
-integer values 0 and 1.
-
-Required subnode-properties:
-- tz1090,pins : An array of strings. Each string contains the name of a pin or
-  group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- tz1090,function: A string containing the name of the function to mux to the
-  pin or group. Valid values for function names are listed below, including
-  which pingroups can be muxed to them.
-- supported generic pinconfig properties (for further details see
-  Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt):
-  - bias-disable
-  - bias-high-impedance
-  - bias-bus-hold
-  - bias-pull-up
-  - bias-pull-down
-  - input-schmitt-enable
-  - input-schmitt-disable
-  - drive-strength: Integer, control drive strength of pins in mA.
-      2: 2mA
-      4: 4mA
-      8: 8mA
-      12: 12mA
-
-
-Note that many of these properties are only valid for certain specific pins
-or groups. See the TZ1090 TRM for complete details regarding which groups
-support which functionality. The Linux pinctrl driver may also be a useful
-reference.
-
-Valid values for pin and group names are:
-
-  gpio pins:
-
-    These all support bias-high-impediance, bias-pull-up, bias-pull-down, and
-    bias-bus-hold (which can also be provided to any of the groups below to set
-    it for all pins in that group).
-
-    They also all support the some form of muxing. Any pins which are contained
-    in one of the mux groups (see below) can be muxed only to the functions
-    supported by the mux group. All other pins can be muxed to the "perip"
-    function which enables them with their intended peripheral.
-
-    Different pins in the same mux group cannot be muxed to different functions,
-    however it is possible to mux only a subset of the pins in a mux group to a
-    particular function and leave the remaining pins unmuxed. This is useful if
-    the board connects certain pins in a group to other devices to be controlled
-    by GPIO, and you don't want the usual peripheral to have any control of the
-    pin.
-
-    ant_sel0, ant_sel1, gain0, gain1, gain2, gain3, gain4, gain5, gain6, gain7,
-    i2s_bclk_out, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2, i2s_lrclk_out,
-    i2s_mclk, pa_on, pdm_a, pdm_b, pdm_c, pdm_d, pll_on, rx_hp, rx_on,
-    scb0_sclk, scb0_sdat, scb1_sclk, scb1_sdat, scb2_sclk, scb2_sdat, sdh_cd,
-    sdh_clk_in, sdh_wp, sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2, sdio_d3,
-    spi0_cs0, spi0_cs1, spi0_cs2, spi0_din, spi0_dout, spi0_mclk, spi1_cs0,
-    spi1_cs1, spi1_cs2, spi1_din, spi1_dout, spi1_mclk, tft_blank_ls, tft_blue0,
-    tft_blue1, tft_blue2, tft_blue3, tft_blue4, tft_blue5, tft_blue6, tft_blue7,
-    tft_green0, tft_green1, tft_green2, tft_green3, tft_green4, tft_green5,
-    tft_green6, tft_green7, tft_hsync_nr, tft_panelclk, tft_pwrsave, tft_red0,
-    tft_red1, tft_red2, tft_red3, tft_red4, tft_red5, tft_red6, tft_red7,
-    tft_vd12acb, tft_vdden_gd, tft_vsync_ns, tx_on, uart0_cts, uart0_rts,
-    uart0_rxd, uart0_txd, uart1_rxd, uart1_txd.
-
-        bias-high-impediance:  supported.
-        bias-pull-up:          supported.
-        bias-pull-down:        supported.
-        bias-bus-hold:         supported.
-        function:              perip or those supported by pin's mux group.
-
-  other pins:
-
-    These other pins are part of various pin groups below, but can't be
-    controlled as GPIOs. They do however support bias-high-impediance,
-    bias-pull-up, bias-pull-down, and bias-bus-hold (which can also be provided
-    to any of the groups below to set it for all pins in that group).
-
-    clk_out0, clk_out1, tck, tdi, tdo, tms, trst.
-
-        bias-high-impediance:  supported.
-        bias-pull-up:          supported.
-        bias-pull-down:        supported.
-        bias-bus-hold:         supported.
-
-  mux groups:
-
-    These all support function, and some support drive configs.
-
-    afe
-        pins:                  tx_on, rx_on, pll_on, pa_on, rx_hp, ant_sel0,
-                               ant_sel1, gain0, gain1, gain2, gain3, gain4,
-                               gain5, gain6, gain7.
-        function:              afe, ts_out_0.
-        input-schmitt-enable:  supported.
-        input-schmitt-disable: supported.
-        drive-strength:        supported.
-    pdm_d
-        pins:                  pdm_d.
-        function:              pdm_dac, usb_vbus.
-    sdh
-        pins:                  sdh_cd, sdh_wp, sdh_clk_in.
-        function:              sdh, sdio.
-    sdio
-        pins:                  sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2,
-                               sdio_d3.
-        function:              sdio, sdh.
-    spi1_cs2
-        pins:                  spi1_cs2.
-        function:              spi1_cs2, usb_vbus.
-    tft
-        pins:                  tft_red0, tft_red1, tft_red2, tft_red3,
-                               tft_red4, tft_red5, tft_red6, tft_red7,
-                               tft_green0, tft_green1, tft_green2, tft_green3,
-                               tft_green4, tft_green5, tft_green6, tft_green7,
-                               tft_blue0, tft_blue1, tft_blue2, tft_blue3,
-                               tft_blue4, tft_blue5, tft_blue6, tft_blue7,
-                               tft_vdden_gd, tft_panelclk, tft_blank_ls,
-                               tft_vsync_ns, tft_hsync_nr, tft_vd12acb,
-                               tft_pwrsave.
-        function:              tft, ext_dac, not_iqadc_stb, iqdac_stb, ts_out_1,
-                               lcd_trace, phy_ringosc.
-        input-schmitt-enable:  supported.
-        input-schmitt-disable: supported.
-        drive-strength:        supported.
-
-  drive groups:
-
-    These all support input-schmitt-enable, input-schmitt-disable,
-    and drive-strength.
-
-    jtag
-        pins:   tck, trst, tdi, tdo, tms.
-    scb1
-        pins:   scb1_sdat, scb1_sclk.
-    scb2
-        pins:   scb2_sdat, scb2_sclk.
-    spi0
-        pins:   spi0_mclk, spi0_cs0, spi0_cs1, spi0_cs2, spi0_dout, spi0_din.
-    spi1
-        pins:   spi1_mclk, spi1_cs0, spi1_cs1, spi1_cs2, spi1_dout, spi1_din.
-    uart
-        pins:   uart0_txd, uart0_rxd, uart0_rts, uart0_cts,
-                uart1_txd, uart1_rxd.
-    drive_i2s
-        pins:   clk_out1, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2,
-                i2s_lrclk_out, i2s_bclk_out, i2s_mclk.
-    drive_pdm
-        pins:   clk_out0, pdm_b, pdm_a.
-    drive_scb0
-        pins:   scb0_sclk, scb0_sdat, pdm_d, pdm_c.
-    drive_sdio
-        pins:   sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2, sdio_d3,
-                sdh_wp, sdh_cd, sdh_clk_in.
-
-  convenience groups:
-
-    These are just convenient groupings of pins and don't support any drive
-    configs.
-
-    uart0
-        pins:   uart0_cts, uart0_rts, uart0_rxd, uart0_txd.
-    uart1
-        pins:   uart1_rxd, uart1_txd.
-    scb0
-        pins:   scb0_sclk, scb0_sdat.
-    i2s
-        pins:   i2s_bclk_out, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2,
-                i2s_lrclk_out, i2s_mclk.
-
-Example:
-
-	pinctrl: pinctrl@2005800 {
-		#gpio-range-cells = <3>;
-		compatible = "img,tz1090-pinctrl";
-		reg = <0x02005800 0xe4>;
-	};
-
-Example board file extract:
-
-	&pinctrl {
-		uart0_default: uart0 {
-			uart0_cfg {
-				tz1090,pins =	"uart0_rxd",
-						"uart0_txd";
-				tz1090,function = "perip";
-			};
-		};
-		tft_default: tft {
-			tft_cfg {
-				tz1090,pins =	"tft";
-				tz1090,function = "tft";
-			};
-		};
-	};
-
-	uart@2004b00 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_default>;
-	};

Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt

@@ -45,6 +45,8 @@ Optional properties:
   - first cell is the pin number
   - second cell is used to specify flags.
 - interrupt-controller: Marks the device node as a interrupt controller.
+- drive-open-drain: Sets the ODR flag in the IOCON register. This configures
+        the IRQ output as open drain active low.
 
 Optional device specific properties:
 - microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices

Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt

@@ -76,12 +76,12 @@ Examples:
 
 ...
 {
-	syscfg_pctl_a: syscfg_pctl_a@10005000 {
+	syscfg_pctl_a: syscfg-pctl-a@10005000 {
 		compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	syscfg_pctl_b: syscfg_pctl_b@1020c020 {
+	syscfg_pctl_b: syscfg-pctl-b@1020c020 {
 		compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
 		reg = <0 0x1020C020 0 0x1000>;
 	};

Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt

+Qualcomm SDM845 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+SDM845 platform.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,sdm845-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.
+
+		    Valid pins are:
+		      gpio0-gpio149
+		        Supports mux, bias and drive-strength
+
+		      sdc2_clk, sdc2_cmd, sdc2_data
+		        Supports bias and drive-strength
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+
+		    gpio, adsp_ext, agera_pll, atest_char, atest_tsens,
+		    atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
+		    atest_usb12, atest_usb13, atest_usb2, atest_usb20,
+		    atest_usb21, atest_usb22, atest_usb23, audio_ref,
+		    btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0,
+		    cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+		    cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+		    ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1,
+		    gcc_gp2, gcc_gp3, jitter_bist, ldo_en, ldo_update,
+		    lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1,
+		    mdp_vsync2, mdp_vsync3, mss_lte, nav_pps, pa_indicator,
+		    pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl,
+		    pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti,
+		    qdss, qlink_enable, qlink_request, qua_mi2s, qup0, qup1,
+		    qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3, qup4,
+		    qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6,
+		    qspi_clk, qspi_cs, qspi_data, sd_write, sdc4_clk, sdc4_cmd,
+		    sdc4_data, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu_ch0,
+		    tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2,
+		    tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync,
+		    tsif2_clk, tsif2_data, tsif2_en, tsif2_error, tsif2_sync,
+		    uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+		    uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy,
+		    vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0,
+		    wlan2_adc1,
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+		    Not valid for sdc pins.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+		    Not valid for sdc pins.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	tlmm: pinctrl@3400000 {
+		compatible = "qcom,sdm845-pinctrl";
+		reg = <0x03400000 0xc00000>;
+		interrupts = <GIC_SPI 208 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		qup9_active: qup9-active {
+			mux {
+				pins = "gpio4", "gpio5";
+				function = "qup9";
+			};
+
+			config {
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};

Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt

@@ -15,7 +15,7 @@ Required Properties:
     - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
     - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller.
     - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller.
-    - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller.
+    - "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller.
     - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
     - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
     - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller.
@@ -24,7 +24,9 @@ Required Properties:
     - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller.
     - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller.
     - "renesas,pfc-r8a7796": for R8A7796 (R-Car M3-W) compatible pin-controller.
+    - "renesas,pfc-r8a77965": for R8A77965 (R-Car M3-N) compatible pin-controller.
     - "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller.
+    - "renesas,pfc-r8a77980": for R8A77980 (R-Car V3H) compatible pin-controller.
     - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller.
     - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
 

drivers/pinctrl/Kconfig

@@ -244,18 +244,6 @@ config PINCTRL_ST
 	select PINCONF
 	select GPIOLIB_IRQCHIP
 
-config PINCTRL_TZ1090
-	bool "Toumaz Xenif TZ1090 pin control driver"
-	depends on SOC_TZ1090
-	select PINMUX
-	select GENERIC_PINCONF
-
-config PINCTRL_TZ1090_PDC
-	bool "Toumaz Xenif TZ1090 PDC pin control driver"
-	depends on SOC_TZ1090
-	select PINMUX
-	select PINCONF
-
 config PINCTRL_U300
 	bool "U300 pin controller driver"
 	depends on ARCH_U300

drivers/pinctrl/Makefile

@@ -31,8 +31,6 @@ obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= sirf/
 obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
-obj-$(CONFIG_PINCTRL_TZ1090)	+= pinctrl-tz1090.o
-obj-$(CONFIG_PINCTRL_TZ1090_PDC)	+= pinctrl-tz1090-pdc.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o

drivers/pinctrl/core.c

@@ -1416,6 +1416,7 @@ int pinctrl_register_mappings(const struct pinctrl_map *maps,
 {
 	return pinctrl_register_map(maps, num_maps, true);
 }
+EXPORT_SYMBOL_GPL(pinctrl_register_mappings);
 
 void pinctrl_unregister_map(const struct pinctrl_map *map)
 {
@@ -1586,6 +1587,7 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(pinctrl_pins);
 
 static int pinctrl_groups_show(struct seq_file *s, void *what)
 {
@@ -1631,6 +1633,7 @@ static int pinctrl_groups_show(struct seq_file *s, void *what)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(pinctrl_groups);
 
 static int pinctrl_gpioranges_show(struct seq_file *s, void *what)
 {
@@ -1664,6 +1667,7 @@ static int pinctrl_gpioranges_show(struct seq_file *s, void *what)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(pinctrl_gpioranges);
 
 static int pinctrl_devices_show(struct seq_file *s, void *what)
 {
@@ -1690,6 +1694,7 @@ static int pinctrl_devices_show(struct seq_file *s, void *what)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(pinctrl_devices);
 
 static inline const char *map_type(enum pinctrl_map_type type)
 {
@@ -1743,6 +1748,7 @@ static int pinctrl_maps_show(struct seq_file *s, void *what)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(pinctrl_maps);
 
 static int pinctrl_show(struct seq_file *s, void *what)
 {
@@ -1788,87 +1794,30 @@ static int pinctrl_show(struct seq_file *s, void *what)
 
 	return 0;
 }
-
-static int pinctrl_pins_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_pins_show, inode->i_private);
-}
-
-static int pinctrl_groups_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_groups_show, inode->i_private);
-}
-
-static int pinctrl_gpioranges_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_gpioranges_show, inode->i_private);
-}
-
-static int pinctrl_devices_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_devices_show, NULL);
-}
-
-static int pinctrl_maps_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_maps_show, NULL);
-}
-
-static int pinctrl_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_show, NULL);
-}
-
-static const struct file_operations pinctrl_pins_ops = {
-	.open		= pinctrl_pins_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static const struct file_operations pinctrl_groups_ops = {
-	.open		= pinctrl_groups_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static const struct file_operations pinctrl_gpioranges_ops = {
-	.open		= pinctrl_gpioranges_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static const struct file_operations pinctrl_devices_ops = {
-	.open		= pinctrl_devices_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static const struct file_operations pinctrl_maps_ops = {
-	.open		= pinctrl_maps_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static const struct file_operations pinctrl_ops = {
-	.open		= pinctrl_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(pinctrl);
 
 static struct dentry *debugfs_root;
 
 static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
 {
 	struct dentry *device_root;
+	const char *debugfs_name;
+
+	if (pctldev->desc->name &&
+			strcmp(dev_name(pctldev->dev), pctldev->desc->name)) {
+		debugfs_name = devm_kasprintf(pctldev->dev, GFP_KERNEL,
+				"%s-%s", dev_name(pctldev->dev),
+				pctldev->desc->name);
+		if (!debugfs_name) {
+			pr_warn("failed to determine debugfs dir name for %s\n",
+				dev_name(pctldev->dev));
+			return;
+		}
+	} else {
+		debugfs_name = dev_name(pctldev->dev);
+	}
 
-	device_root = debugfs_create_dir(dev_name(pctldev->dev),
-					 debugfs_root);
+	device_root = debugfs_create_dir(debugfs_name, debugfs_root);
 	pctldev->device_root = device_root;
 
 	if (IS_ERR(device_root) || !device_root) {
@@ -1877,11 +1826,11 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
 		return;
 	}
 	debugfs_create_file("pins", S_IFREG | S_IRUGO,
-			    device_root, pctldev, &pinctrl_pins_ops);
+			    device_root, pctldev, &pinctrl_pins_fops);
 	debugfs_create_file("pingroups", S_IFREG | S_IRUGO,
-			    device_root, pctldev, &pinctrl_groups_ops);
+			    device_root, pctldev, &pinctrl_groups_fops);
 	debugfs_create_file("gpio-ranges", S_IFREG | S_IRUGO,
-			    device_root, pctldev, &pinctrl_gpioranges_ops);
+			    device_root, pctldev, &pinctrl_gpioranges_fops);
 	if (pctldev->desc->pmxops)
 		pinmux_init_device_debugfs(device_root, pctldev);
 	if (pctldev->desc->confops)
@@ -1903,11 +1852,11 @@ static void pinctrl_init_debugfs(void)
 	}
 
 	debugfs_create_file("pinctrl-devices", S_IFREG | S_IRUGO,
-			    debugfs_root, NULL, &pinctrl_devices_ops);
+			    debugfs_root, NULL, &pinctrl_devices_fops);
 	debugfs_create_file("pinctrl-maps", S_IFREG | S_IRUGO,
-			    debugfs_root, NULL, &pinctrl_maps_ops);
+			    debugfs_root, NULL, &pinctrl_maps_fops);
 	debugfs_create_file("pinctrl-handles", S_IFREG | S_IRUGO,
-			    debugfs_root, NULL, &pinctrl_ops);
+			    debugfs_root, NULL, &pinctrl_fops);
 }
 
 #else /* CONFIG_DEBUG_FS */

drivers/pinctrl/devicetree.c

@@ -122,8 +122,10 @@ static int dt_to_map_one_config(struct pinctrl *p,
 			/* OK let's just assume this will appear later then */
 			return -EPROBE_DEFER;
 		}
-		if (!pctldev)
-			pctldev = get_pinctrl_dev_from_of_node(np_pctldev);
+		/* If we're creating a hog we can use the passed pctldev */
+		if (pctldev && (np_pctldev == p->dev->of_node))
+			break;
+		pctldev = get_pinctrl_dev_from_of_node(np_pctldev);
 		if (pctldev)
 			break;
 		/* Do not defer probing of hogs (circular loop) */

drivers/pinctrl/freescale/Kconfig

@@ -82,6 +82,13 @@ config PINCTRL_IMX6SL
 	help
 	  Say Y here to enable the imx6sl pinctrl driver
 
+config PINCTRL_IMX6SLL
+	bool "IMX6SLL pinctrl driver"
+	depends on SOC_IMX6SLL
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx6sll pinctrl driver
+
 config PINCTRL_IMX6SX
 	bool "IMX6SX pinctrl driver"
 	depends on SOC_IMX6SX

drivers/pinctrl/freescale/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_PINCTRL_IMX53)	+= pinctrl-imx53.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6q.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6dl.o
 obj-$(CONFIG_PINCTRL_IMX6SL)	+= pinctrl-imx6sl.o
+obj-$(CONFIG_PINCTRL_IMX6SLL)	+= pinctrl-imx6sll.o
 obj-$(CONFIG_PINCTRL_IMX6SX)	+= pinctrl-imx6sx.o
 obj-$(CONFIG_PINCTRL_IMX6UL)	+= pinctrl-imx6ul.o
 obj-$(CONFIG_PINCTRL_IMX7D)	+= pinctrl-imx7d.o

drivers/pinctrl/freescale/pinctrl-imx6sll.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-imx.h"
+
+enum imx6sll_pads {
+	MX6SLL_PAD_RESERVE0 = 0,
+	MX6SLL_PAD_RESERVE1 = 1,
+	MX6SLL_PAD_RESERVE2 = 2,
+	MX6SLL_PAD_RESERVE3 = 3,
+	MX6SLL_PAD_RESERVE4 = 4,
+	MX6SLL_PAD_WDOG_B = 5,
+	MX6SLL_PAD_REF_CLK_24M = 6,
+	MX6SLL_PAD_REF_CLK_32K = 7,
+	MX6SLL_PAD_PWM1 = 8,
+	MX6SLL_PAD_KEY_COL0 = 9,
+	MX6SLL_PAD_KEY_ROW0 = 10,
+	MX6SLL_PAD_KEY_COL1 = 11,
+	MX6SLL_PAD_KEY_ROW1 = 12,
+	MX6SLL_PAD_KEY_COL2 = 13,
+	MX6SLL_PAD_KEY_ROW2 = 14,
+	MX6SLL_PAD_KEY_COL3 = 15,
+	MX6SLL_PAD_KEY_ROW3 = 16,
+	MX6SLL_PAD_KEY_COL4 = 17,
+	MX6SLL_PAD_KEY_ROW4 = 18,
+	MX6SLL_PAD_KEY_COL5 = 19,
+	MX6SLL_PAD_KEY_ROW5 = 20,
+	MX6SLL_PAD_KEY_COL6 = 21,
+	MX6SLL_PAD_KEY_ROW6 = 22,
+	MX6SLL_PAD_KEY_COL7 = 23,
+	MX6SLL_PAD_KEY_ROW7 = 24,
+	MX6SLL_PAD_EPDC_DATA00 = 25,
+	MX6SLL_PAD_EPDC_DATA01 = 26,
+	MX6SLL_PAD_EPDC_DATA02 = 27,
+	MX6SLL_PAD_EPDC_DATA03 = 28,
+	MX6SLL_PAD_EPDC_DATA04 = 29,
+	MX6SLL_PAD_EPDC_DATA05 = 30,
+	MX6SLL_PAD_EPDC_DATA06 = 31,
+	MX6SLL_PAD_EPDC_DATA07 = 32,
+	MX6SLL_PAD_EPDC_DATA08 = 33,
+	MX6SLL_PAD_EPDC_DATA09 = 34,
+	MX6SLL_PAD_EPDC_DATA10 = 35,
+	MX6SLL_PAD_EPDC_DATA11 = 36,
+	MX6SLL_PAD_EPDC_DATA12 = 37,
+	MX6SLL_PAD_EPDC_DATA13 = 38,
+	MX6SLL_PAD_EPDC_DATA14 = 39,
+	MX6SLL_PAD_EPDC_DATA15 = 40,
+	MX6SLL_PAD_EPDC_SDCLK = 41,
+	MX6SLL_PAD_EPDC_SDLE = 42,
+	MX6SLL_PAD_EPDC_SDOE = 43,
+	MX6SLL_PAD_EPDC_SDSHR = 44,
+	MX6SLL_PAD_EPDC_SDCE0 = 45,
+	MX6SLL_PAD_EPDC_SDCE1 = 46,
+	MX6SLL_PAD_EPDC_SDCE2 = 47,
+	MX6SLL_PAD_EPDC_SDCE3 = 48,
+	MX6SLL_PAD_EPDC_GDCLK = 49,
+	MX6SLL_PAD_EPDC_GDOE = 50,
+	MX6SLL_PAD_EPDC_GDRL = 51,
+	MX6SLL_PAD_EPDC_GDSP = 52,
+	MX6SLL_PAD_EPDC_VCOM0 = 53,
+	MX6SLL_PAD_EPDC_VCOM1 = 54,
+	MX6SLL_PAD_EPDC_BDR0 = 55,
+	MX6SLL_PAD_EPDC_BDR1 = 56,
+	MX6SLL_PAD_EPDC_PWR_CTRL0 = 57,
+	MX6SLL_PAD_EPDC_PWR_CTRL1 = 58,
+	MX6SLL_PAD_EPDC_PWR_CTRL2 = 59,
+	MX6SLL_PAD_EPDC_PWR_CTRL3 = 60,
+	MX6SLL_PAD_EPDC_PWR_COM = 61,
+	MX6SLL_PAD_EPDC_PWR_INT = 62,
+	MX6SLL_PAD_EPDC_PWR_STAT = 63,
+	MX6SLL_PAD_EPDC_PWR_WAKE = 64,
+	MX6SLL_PAD_LCD_CLK = 65,
+	MX6SLL_PAD_LCD_ENABLE = 66,
+	MX6SLL_PAD_LCD_HSYNC = 67,
+	MX6SLL_PAD_LCD_VSYNC = 68,
+	MX6SLL_PAD_LCD_RESET = 69,
+	MX6SLL_PAD_LCD_DATA00 = 70,
+	MX6SLL_PAD_LCD_DATA01 = 71,
+	MX6SLL_PAD_LCD_DATA02 = 72,
+	MX6SLL_PAD_LCD_DATA03 = 73,
+	MX6SLL_PAD_LCD_DATA04 = 74,
+	MX6SLL_PAD_LCD_DATA05 = 75,
+	MX6SLL_PAD_LCD_DATA06 = 76,
+	MX6SLL_PAD_LCD_DATA07 = 77,
+	MX6SLL_PAD_LCD_DATA08 = 78,
+	MX6SLL_PAD_LCD_DATA09 = 79,
+	MX6SLL_PAD_LCD_DATA10 = 80,
+	MX6SLL_PAD_LCD_DATA11 = 81,
+	MX6SLL_PAD_LCD_DATA12 = 82,
+	MX6SLL_PAD_LCD_DATA13 = 83,
+	MX6SLL_PAD_LCD_DATA14 = 84,
+	MX6SLL_PAD_LCD_DATA15 = 85,
+	MX6SLL_PAD_LCD_DATA16 = 86,
+	MX6SLL_PAD_LCD_DATA17 = 87,
+	MX6SLL_PAD_LCD_DATA18 = 88,
+	MX6SLL_PAD_LCD_DATA19 = 89,
+	MX6SLL_PAD_LCD_DATA20 = 90,
+	MX6SLL_PAD_LCD_DATA21 = 91,
+	MX6SLL_PAD_LCD_DATA22 = 92,
+	MX6SLL_PAD_LCD_DATA23 = 93,
+	MX6SLL_PAD_AUD_RXFS = 94,
+	MX6SLL_PAD_AUD_RXC = 95,
+	MX6SLL_PAD_AUD_RXD = 96,
+	MX6SLL_PAD_AUD_TXC = 97,
+	MX6SLL_PAD_AUD_TXFS = 98,
+	MX6SLL_PAD_AUD_TXD = 99,
+	MX6SLL_PAD_AUD_MCLK = 100,
+	MX6SLL_PAD_UART1_RXD = 101,
+	MX6SLL_PAD_UART1_TXD = 102,
+	MX6SLL_PAD_I2C1_SCL = 103,
+	MX6SLL_PAD_I2C1_SDA = 104,
+	MX6SLL_PAD_I2C2_SCL = 105,
+	MX6SLL_PAD_I2C2_SDA = 106,
+	MX6SLL_PAD_ECSPI1_SCLK = 107,
+	MX6SLL_PAD_ECSPI1_MOSI = 108,
+	MX6SLL_PAD_ECSPI1_MISO = 109,
+	MX6SLL_PAD_ECSPI1_SS0 = 110,
+	MX6SLL_PAD_ECSPI2_SCLK = 111,
+	MX6SLL_PAD_ECSPI2_MOSI = 112,
+	MX6SLL_PAD_ECSPI2_MISO = 113,
+	MX6SLL_PAD_ECSPI2_SS0 = 114,
+	MX6SLL_PAD_SD1_CLK = 115,
+	MX6SLL_PAD_SD1_CMD = 116,
+	MX6SLL_PAD_SD1_DATA0 = 117,
+	MX6SLL_PAD_SD1_DATA1 = 118,
+	MX6SLL_PAD_SD1_DATA2 = 119,
+	MX6SLL_PAD_SD1_DATA3 = 120,
+	MX6SLL_PAD_SD1_DATA4 = 121,
+	MX6SLL_PAD_SD1_DATA5 = 122,
+	MX6SLL_PAD_SD1_DATA6 = 123,
+	MX6SLL_PAD_SD1_DATA7 = 124,
+	MX6SLL_PAD_SD2_RESET = 125,
+	MX6SLL_PAD_SD2_CLK = 126,
+	MX6SLL_PAD_SD2_CMD = 127,
+	MX6SLL_PAD_SD2_DATA0 = 128,
+	MX6SLL_PAD_SD2_DATA1 = 129,
+	MX6SLL_PAD_SD2_DATA2 = 130,
+	MX6SLL_PAD_SD2_DATA3 = 131,
+	MX6SLL_PAD_SD2_DATA4 = 132,
+	MX6SLL_PAD_SD2_DATA5 = 133,
+	MX6SLL_PAD_SD2_DATA6 = 134,
+	MX6SLL_PAD_SD2_DATA7 = 135,
+	MX6SLL_PAD_SD3_CLK = 136,
+	MX6SLL_PAD_SD3_CMD = 137,
+	MX6SLL_PAD_SD3_DATA0 = 138,
+	MX6SLL_PAD_SD3_DATA1 = 139,
+	MX6SLL_PAD_SD3_DATA2 = 140,
+	MX6SLL_PAD_SD3_DATA3 = 141,
+	MX6SLL_PAD_GPIO4_IO20 = 142,
+	MX6SLL_PAD_GPIO4_IO21 = 143,
+	MX6SLL_PAD_GPIO4_IO19 = 144,
+	MX6SLL_PAD_GPIO4_IO25 = 145,
+	MX6SLL_PAD_GPIO4_IO18 = 146,
+	MX6SLL_PAD_GPIO4_IO24 = 147,
+	MX6SLL_PAD_GPIO4_IO23 = 148,
+	MX6SLL_PAD_GPIO4_IO17 = 149,
+	MX6SLL_PAD_GPIO4_IO22 = 150,
+	MX6SLL_PAD_GPIO4_IO16 = 151,
+	MX6SLL_PAD_GPIO4_IO26 = 152,
+};
+
+/* Pad names for the pinmux subsystem */
+static const struct pinctrl_pin_desc imx6sll_pinctrl_pads[] = {
+	IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE2),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE3),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE4),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_WDOG_B),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_REF_CLK_24M),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_REF_CLK_32K),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_PWM1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL2),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW2),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL3),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW3),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL4),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW4),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL5),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW5),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL6),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW6),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL7),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW7),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA00),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA01),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA02),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA03),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA04),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA05),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA06),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA07),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA08),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA09),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA10),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA11),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA12),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA13),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA14),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA15),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCLK),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDLE),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDOE),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDSHR),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE2),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE3),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDCLK),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDOE),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDRL),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDSP),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_VCOM0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_VCOM1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_BDR0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_BDR1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL2),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL3),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_COM),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_INT),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_STAT),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_WAKE),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_CLK),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_ENABLE),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_HSYNC),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_VSYNC),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_RESET),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA00),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA01),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA02),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA03),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA04),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA05),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA06),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA07),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA08),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA09),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA10),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA11),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA12),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA13),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA14),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA15),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA16),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA17),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA18),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA19),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA20),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA21),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA22),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA23),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXFS),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXC),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXD),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXC),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXFS),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXD),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_MCLK),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_UART1_RXD),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_UART1_TXD),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_I2C1_SCL),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_I2C1_SDA),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_I2C2_SCL),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_I2C2_SDA),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_SCLK),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_MOSI),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_MISO),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_SS0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_SCLK),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_MOSI),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_MISO),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_SS0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_CLK),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_CMD),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA2),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA3),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA4),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA5),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA6),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA7),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_RESET),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_CLK),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_CMD),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA2),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA3),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA4),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA5),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA6),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA7),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_CLK),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_CMD),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA0),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA1),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA2),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA3),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO20),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO21),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO19),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO25),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO18),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO24),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO23),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO17),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO22),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO16),
+	IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO26),
+};
+
+static const struct imx_pinctrl_soc_info imx6sll_pinctrl_info = {
+	.pins = imx6sll_pinctrl_pads,
+	.npins = ARRAY_SIZE(imx6sll_pinctrl_pads),
+	.gpr_compatible = "fsl,imx6sll-iomuxc-gpr",
+};
+
+static const struct of_device_id imx6sll_pinctrl_of_match[] = {
+	{ .compatible = "fsl,imx6sll-iomuxc", .data = &imx6sll_pinctrl_info, },
+	{ /* sentinel */ }
+};
+
+static int imx6sll_pinctrl_probe(struct platform_device *pdev)
+{
+	return imx_pinctrl_probe(pdev, &imx6sll_pinctrl_info);
+}
+
+static struct platform_driver imx6sll_pinctrl_driver = {
+	.driver = {
+		.name = "imx6sll-pinctrl",
+		.of_match_table = of_match_ptr(imx6sll_pinctrl_of_match),
+		.suppress_bind_attrs = true,
+	},
+	.probe = imx6sll_pinctrl_probe,
+};
+
+static int __init imx6sll_pinctrl_init(void)
+{
+	return platform_driver_register(&imx6sll_pinctrl_driver);
+}
+arch_initcall(imx6sll_pinctrl_init);

drivers/pinctrl/intel/pinctrl-intel.c

@@ -788,6 +788,24 @@ static void intel_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
 }
 
+static int intel_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct intel_pinctrl *pctrl = gpiochip_get_data(chip);
+	void __iomem *reg;
+	u32 padcfg0;
+
+	reg = intel_get_padcfg(pctrl, offset, PADCFG0);
+	if (!reg)
+		return -EINVAL;
+
+	padcfg0 = readl(reg);
+
+	if (padcfg0 & PADCFG0_PMODE_MASK)
+		return -EINVAL;
+
+	return !!(padcfg0 & PADCFG0_GPIOTXDIS);
+}
+
 static int intel_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	return pinctrl_gpio_direction_input(chip->base + offset);
@@ -804,6 +822,7 @@ static const struct gpio_chip intel_gpio_chip = {
 	.owner = THIS_MODULE,
 	.request = gpiochip_generic_request,
 	.free = gpiochip_generic_free,
+	.get_direction = intel_gpio_get_direction,
 	.direction_input = intel_gpio_direction_input,
 	.direction_output = intel_gpio_direction_output,
 	.get = intel_gpio_get,

drivers/pinctrl/mediatek/Kconfig

@@ -32,6 +32,13 @@ config PINCTRL_MT8127
 	select PINCTRL_MTK
 
 # For ARMv8 SoCs
+config PINCTRL_MT2712
+	bool "MediaTek MT2712 pin control"
+	depends on OF
+	depends on ARM64 || COMPILE_TEST
+	default ARM64 && ARCH_MEDIATEK
+	select PINCTRL_MTK
+
 config PINCTRL_MT7622
 	bool "MediaTek MT7622 pin control"
 	depends on OF

drivers/pinctrl/mediatek/Makefile

@@ -4,6 +4,7 @@ obj-$(CONFIG_PINCTRL_MTK)	+= pinctrl-mtk-common.o
 
 # SoC Drivers
 obj-$(CONFIG_PINCTRL_MT2701)	+= pinctrl-mt2701.o
+obj-$(CONFIG_PINCTRL_MT2712)	+= pinctrl-mt2712.o
 obj-$(CONFIG_PINCTRL_MT8135)	+= pinctrl-mt8135.o
 obj-$(CONFIG_PINCTRL_MT8127)	+= pinctrl-mt8127.o
 obj-$(CONFIG_PINCTRL_MT7622)	+= pinctrl-mt7622.o

drivers/pinctrl/mediatek/pinctrl-mtk-common.c

@@ -293,7 +293,7 @@ static int mtk_pconf_set_pull_select(struct mtk_pinctrl *pctl,
 		unsigned int pin, bool enable, bool isup, unsigned int arg)
 {
 	unsigned int bit;
-	unsigned int reg_pullen, reg_pullsel;
+	unsigned int reg_pullen, reg_pullsel, r1r0;
 	int ret;
 
 	/* Some pins' pull setting are very different,
@@ -301,8 +301,12 @@ static int mtk_pconf_set_pull_select(struct mtk_pinctrl *pctl,
 	 * resistor bit, so we need this special handle.
 	 */
 	if (pctl->devdata->spec_pull_set) {
+		/* For special pins, bias-disable is set by R1R0,
+		 * the parameter should be "MTK_PUPD_SET_R1R0_00".
+		 */
+		r1r0 = enable ? arg : MTK_PUPD_SET_R1R0_00;
 		ret = pctl->devdata->spec_pull_set(mtk_get_regmap(pctl, pin),
-			pin, pctl->devdata->port_align, isup, arg);
+			pin, pctl->devdata->port_align, isup, r1r0);
 		if (!ret)
 			return 0;
 	}
@@ -501,7 +505,7 @@ static int mtk_pctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	int num_pins, num_funcs, maps_per_pin;
 	unsigned long *configs;
 	unsigned int num_configs;
-	bool has_config = 0;
+	bool has_config = false;
 	int i, err;
 	unsigned reserve = 0;
 	struct mtk_pinctrl_group *grp;
@@ -520,7 +524,7 @@ static int mtk_pctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		return err;
 
 	if (num_configs)
-		has_config = 1;
+		has_config = true;
 
 	num_pins = pins->length / sizeof(u32);
 	num_funcs = num_pins;

drivers/pinctrl/mediatek/pinctrl-mtk-mt6397.h

@@ -6,74 +6,64 @@
 #include "pinctrl-mtk-common.h"
 
 static const struct mtk_desc_pin mtk_pins_mt6397[] = {
-	MTK_PIN(
-		PINCTRL_PIN(0, "INT"),
+	MTK_PIN(PINCTRL_PIN(0, "INT"),
 		"N2", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO0"),
 		MTK_FUNCTION(1, "INT")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(1, "SRCVOLTEN"),
+	MTK_PIN(PINCTRL_PIN(1, "SRCVOLTEN"),
 		"M4", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO1"),
 		MTK_FUNCTION(1, "SRCVOLTEN"),
 		MTK_FUNCTION(6, "TEST_CK1")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(2, "SRCLKEN_PERI"),
+	MTK_PIN(PINCTRL_PIN(2, "SRCLKEN_PERI"),
 		"M2", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO2"),
 		MTK_FUNCTION(1, "SRCLKEN_PERI"),
 		MTK_FUNCTION(6, "TEST_CK2")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(3, "RTC_32K1V8"),
+	MTK_PIN(PINCTRL_PIN(3, "RTC_32K1V8"),
 		"K3", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO3"),
 		MTK_FUNCTION(1, "RTC_32K1V8"),
 		MTK_FUNCTION(6, "TEST_CK3")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(4, "WRAP_EVENT"),
+	MTK_PIN(PINCTRL_PIN(4, "WRAP_EVENT"),
 		"J2", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO4"),
 		MTK_FUNCTION(1, "WRAP_EVENT")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(5, "SPI_CLK"),
+	MTK_PIN(PINCTRL_PIN(5, "SPI_CLK"),
 		"L4", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO5"),
 		MTK_FUNCTION(1, "SPI_CLK")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(6, "SPI_CSN"),
+	MTK_PIN(PINCTRL_PIN(6, "SPI_CSN"),
 		"J3", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO6"),
 		MTK_FUNCTION(1, "SPI_CSN")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(7, "SPI_MOSI"),
+	MTK_PIN(PINCTRL_PIN(7, "SPI_MOSI"),
 		"J1", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO7"),
 		MTK_FUNCTION(1, "SPI_MOSI")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(8, "SPI_MISO"),
+	MTK_PIN(PINCTRL_PIN(8, "SPI_MISO"),
 		"L3", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO8"),
 		MTK_FUNCTION(1, "SPI_MISO")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(9, "AUD_CLK_MOSI"),
+	MTK_PIN(PINCTRL_PIN(9, "AUD_CLK_MOSI"),
 		"H2", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO9"),
@@ -81,8 +71,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN0"),
 		MTK_FUNCTION(7, "TEST_OUT0")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(10, "AUD_DAT_MISO"),
+	MTK_PIN(PINCTRL_PIN(10, "AUD_DAT_MISO"),
 		"H3", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO10"),
@@ -90,8 +79,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN1"),
 		MTK_FUNCTION(7, "TEST_OUT1")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(11, "AUD_DAT_MOSI"),
+	MTK_PIN(PINCTRL_PIN(11, "AUD_DAT_MOSI"),
 		"H1", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO11"),
@@ -99,8 +87,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN2"),
 		MTK_FUNCTION(7, "TEST_OUT2")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(12, "COL0"),
+	MTK_PIN(PINCTRL_PIN(12, "COL0"),
 		"F3", "mt6397",
 		MTK_EINT_FUNCTION(2, 10),
 		MTK_FUNCTION(0, "GPIO12"),
@@ -110,8 +97,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN3"),
 		MTK_FUNCTION(7, "TEST_OUT3")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(13, "COL1"),
+	MTK_PIN(PINCTRL_PIN(13, "COL1"),
 		"G8", "mt6397",
 		MTK_EINT_FUNCTION(2, 11),
 		MTK_FUNCTION(0, "GPIO13"),
@@ -121,8 +107,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN4"),
 		MTK_FUNCTION(7, "TEST_OUT4")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(14, "COL2"),
+	MTK_PIN(PINCTRL_PIN(14, "COL2"),
 		"H4", "mt6397",
 		MTK_EINT_FUNCTION(2, 12),
 		MTK_FUNCTION(0, "GPIO14"),
@@ -132,8 +117,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN5"),
 		MTK_FUNCTION(7, "TEST_OUT5")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(15, "COL3"),
+	MTK_PIN(PINCTRL_PIN(15, "COL3"),
 		"G2", "mt6397",
 		MTK_EINT_FUNCTION(2, 13),
 		MTK_FUNCTION(0, "GPIO15"),
@@ -143,8 +127,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN6"),
 		MTK_FUNCTION(7, "TEST_OUT6")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(16, "COL4"),
+	MTK_PIN(PINCTRL_PIN(16, "COL4"),
 		"F2", "mt6397",
 		MTK_EINT_FUNCTION(2, 14),
 		MTK_FUNCTION(0, "GPIO16"),
@@ -154,8 +137,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN7"),
 		MTK_FUNCTION(7, "TEST_OUT7")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(17, "COL5"),
+	MTK_PIN(PINCTRL_PIN(17, "COL5"),
 		"G7", "mt6397",
 		MTK_EINT_FUNCTION(2, 15),
 		MTK_FUNCTION(0, "GPIO17"),
@@ -165,8 +147,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN8"),
 		MTK_FUNCTION(7, "TEST_OUT8")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(18, "COL6"),
+	MTK_PIN(PINCTRL_PIN(18, "COL6"),
 		"J6", "mt6397",
 		MTK_EINT_FUNCTION(2, 16),
 		MTK_FUNCTION(0, "GPIO18"),
@@ -178,8 +159,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN9"),
 		MTK_FUNCTION(7, "TEST_OUT9")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(19, "COL7"),
+	MTK_PIN(PINCTRL_PIN(19, "COL7"),
 		"J5", "mt6397",
 		MTK_EINT_FUNCTION(2, 17),
 		MTK_FUNCTION(0, "GPIO19"),
@@ -191,8 +171,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN10"),
 		MTK_FUNCTION(7, "TEST_OUT10")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(20, "ROW0"),
+	MTK_PIN(PINCTRL_PIN(20, "ROW0"),
 		"L7", "mt6397",
 		MTK_EINT_FUNCTION(2, 18),
 		MTK_FUNCTION(0, "GPIO20"),
@@ -202,8 +181,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN11"),
 		MTK_FUNCTION(7, "TEST_OUT11")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(21, "ROW1"),
+	MTK_PIN(PINCTRL_PIN(21, "ROW1"),
 		"P1", "mt6397",
 		MTK_EINT_FUNCTION(2, 19),
 		MTK_FUNCTION(0, "GPIO21"),
@@ -214,8 +192,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN12"),
 		MTK_FUNCTION(7, "TEST_OUT12")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(22, "ROW2"),
+	MTK_PIN(PINCTRL_PIN(22, "ROW2"),
 		"J8", "mt6397",
 		MTK_EINT_FUNCTION(2, 20),
 		MTK_FUNCTION(0, "GPIO22"),
@@ -225,8 +202,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN13"),
 		MTK_FUNCTION(7, "TEST_OUT13")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(23, "ROW3"),
+	MTK_PIN(PINCTRL_PIN(23, "ROW3"),
 		"J7", "mt6397",
 		MTK_EINT_FUNCTION(2, 21),
 		MTK_FUNCTION(0, "GPIO23"),
@@ -236,8 +212,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN14"),
 		MTK_FUNCTION(7, "TEST_OUT14")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(24, "ROW4"),
+	MTK_PIN(PINCTRL_PIN(24, "ROW4"),
 		"L5", "mt6397",
 		MTK_EINT_FUNCTION(2, 22),
 		MTK_FUNCTION(0, "GPIO24"),
@@ -247,8 +222,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN15"),
 		MTK_FUNCTION(7, "TEST_OUT15")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(25, "ROW5"),
+	MTK_PIN(PINCTRL_PIN(25, "ROW5"),
 		"N6", "mt6397",
 		MTK_EINT_FUNCTION(2, 23),
 		MTK_FUNCTION(0, "GPIO25"),
@@ -258,8 +232,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN16"),
 		MTK_FUNCTION(7, "TEST_OUT16")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(26, "ROW6"),
+	MTK_PIN(PINCTRL_PIN(26, "ROW6"),
 		"L6", "mt6397",
 		MTK_EINT_FUNCTION(2, 24),
 		MTK_FUNCTION(0, "GPIO26"),
@@ -271,8 +244,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN17"),
 		MTK_FUNCTION(7, "TEST_OUT17")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(27, "ROW7"),
+	MTK_PIN(PINCTRL_PIN(27, "ROW7"),
 		"P2", "mt6397",
 		MTK_EINT_FUNCTION(2, 3),
 		MTK_FUNCTION(0, "GPIO27"),
@@ -284,8 +256,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN18"),
 		MTK_FUNCTION(7, "TEST_OUT18")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(28, "PWM1(VMSEL1)"),
+	MTK_PIN(PINCTRL_PIN(28, "PWM1(VMSEL1)"),
 		"J4", "mt6397",
 		MTK_EINT_FUNCTION(2, 4),
 		MTK_FUNCTION(0, "GPIO28"),
@@ -296,8 +267,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN19"),
 		MTK_FUNCTION(7, "TEST_OUT19")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(29, "PWM2(VMSEL2)"),
+	MTK_PIN(PINCTRL_PIN(29, "PWM2(VMSEL2)"),
 		"N5", "mt6397",
 		MTK_EINT_FUNCTION(2, 5),
 		MTK_FUNCTION(0, "GPIO29"),
@@ -308,8 +278,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN20"),
 		MTK_FUNCTION(7, "TEST_OUT20")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(30, "PWM3(PWM)"),
+	MTK_PIN(PINCTRL_PIN(30, "PWM3(PWM)"),
 		"R3", "mt6397",
 		MTK_EINT_FUNCTION(2, 6),
 		MTK_FUNCTION(0, "GPIO30"),
@@ -321,8 +290,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN21"),
 		MTK_FUNCTION(7, "TEST_OUT21")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(31, "SCL0"),
+	MTK_PIN(PINCTRL_PIN(31, "SCL0"),
 		"N1", "mt6397",
 		MTK_EINT_FUNCTION(2, 7),
 		MTK_FUNCTION(0, "GPIO31"),
@@ -332,8 +300,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN22"),
 		MTK_FUNCTION(7, "TEST_OUT22")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(32, "SDA0"),
+	MTK_PIN(PINCTRL_PIN(32, "SDA0"),
 		"N3", "mt6397",
 		MTK_EINT_FUNCTION(2, 8),
 		MTK_FUNCTION(0, "GPIO32"),
@@ -342,8 +309,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN23"),
 		MTK_FUNCTION(7, "TEST_OUT23")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(33, "SCL1"),
+	MTK_PIN(PINCTRL_PIN(33, "SCL1"),
 		"T1", "mt6397",
 		MTK_EINT_FUNCTION(2, 9),
 		MTK_FUNCTION(0, "GPIO33"),
@@ -353,8 +319,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN24"),
 		MTK_FUNCTION(7, "TEST_OUT24")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(34, "SDA1"),
+	MTK_PIN(PINCTRL_PIN(34, "SDA1"),
 		"T2", "mt6397",
 		MTK_EINT_FUNCTION(2, 0),
 		MTK_FUNCTION(0, "GPIO34"),
@@ -363,8 +328,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN25"),
 		MTK_FUNCTION(7, "TEST_OUT25")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(35, "SCL2"),
+	MTK_PIN(PINCTRL_PIN(35, "SCL2"),
 		"T3", "mt6397",
 		MTK_EINT_FUNCTION(2, 1),
 		MTK_FUNCTION(0, "GPIO35"),
@@ -374,8 +338,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN26"),
 		MTK_FUNCTION(7, "TEST_OUT26")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(36, "SDA2"),
+	MTK_PIN(PINCTRL_PIN(36, "SDA2"),
 		"U2", "mt6397",
 		MTK_EINT_FUNCTION(2, 2),
 		MTK_FUNCTION(0, "GPIO36"),
@@ -384,8 +347,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN27"),
 		MTK_FUNCTION(7, "TEST_OUT27")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(37, "HDMISD"),
+	MTK_PIN(PINCTRL_PIN(37, "HDMISD"),
 		"H6", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO37"),
@@ -393,8 +355,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN28"),
 		MTK_FUNCTION(7, "TEST_OUT28")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(38, "HDMISCK"),
+	MTK_PIN(PINCTRL_PIN(38, "HDMISCK"),
 		"H5", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO38"),
@@ -402,8 +363,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN29"),
 		MTK_FUNCTION(7, "TEST_OUT29")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(39, "HTPLG"),
+	MTK_PIN(PINCTRL_PIN(39, "HTPLG"),
 		"H7", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO39"),
@@ -411,8 +371,7 @@ static const struct mtk_desc_pin mtk_pins_mt6397[] = {
 		MTK_FUNCTION(6, "TEST_IN30"),
 		MTK_FUNCTION(7, "TEST_OUT30")
 	),
-	MTK_PIN(
-		PINCTRL_PIN(40, "CEC"),
+	MTK_PIN(PINCTRL_PIN(40, "CEC"),
 		"J9", "mt6397",
 		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
 		MTK_FUNCTION(0, "GPIO40"),

drivers/pinctrl/meson/pinctrl-meson8b.c

@@ -884,20 +884,24 @@ static struct meson_pmx_func meson8b_aobus_functions[] = {
 };
 
 static struct meson_bank meson8b_cbus_banks[] = {
-	/*   name    first              last        irq      pullen  pull    dir     out     in  */
-	BANK("X",    GPIOX_0,		GPIOX_21,   97, 118, 4,  0,  4,  0,  0,  0,  1,  0,  2,  0),
-	BANK("Y",    GPIOY_0,		GPIOY_14,   80,  96, 3,  0,  3,  0,  3,  0,  4,  0,  5,  0),
-	BANK("DV",   GPIODV_9,		GPIODV_29,  59,  79, 0,  0,  0,  0,  7,  0,  8,  0,  9,  0),
-	BANK("H",    GPIOH_0,		GPIOH_9,    14,  23, 1, 16,  1, 16,  9, 19, 10, 19, 11, 19),
-	BANK("CARD", CARD_0,		CARD_6,     43,  49, 2, 20,  2, 20,  0, 22,  1, 22,  2, 22),
-	BANK("BOOT", BOOT_0,		BOOT_18,    24,  42, 2,  0,  2,  0,  9,  0, 10,  0, 11,  0),
+	/*   name        first          last        irq       pullen   pull     dir      out      in   */
+	BANK("X0..11",	 GPIOX_0,	GPIOX_11,   97, 108,  4,  0,   4,  0,   0,  0,   1,  0,   2,  0),
+	BANK("X16..21",	 GPIOX_16,	GPIOX_21,  113, 118,  4, 16,   4, 16,   0, 16,   1, 16,   2, 16),
+	BANK("Y0..1",	 GPIOY_0,	GPIOY_1,    80,  81,  3,  0,   3,  0,   3,  0,   4,  0,   5,  0),
+	BANK("Y3",	 GPIOY_3,	GPIOY_3,    83,  83,  3,  3,   3,  3,   3,  3,   4,  3,   5,  3),
+	BANK("Y6..14",	 GPIOY_6,	GPIOY_14,   86,  94,  3,  6,   3,  6,   3,  6,   4,  6,   5,  6),
+	BANK("DV9",	 GPIODV_9,	GPIODV_9,   59,  59,  0,  9,   0,  9,   7,  9,   8,  9,   9,  9),
+	BANK("DV24..29", GPIODV_24,	GPIODV_29,  74,  79,  0, 24,   0, 24,   7, 24,   8, 24,   9, 24),
+	BANK("H",	 GPIOH_0,	GPIOH_9,    14,  23,  1, 16,   1, 16,   9, 19,  10, 19,  11, 19),
+	BANK("CARD",	 CARD_0,	CARD_6,     43,  49,  2, 20,   2, 20,   0, 22,   1, 22,   2, 22),
+	BANK("BOOT",	 BOOT_0,	BOOT_18,    24,  42,  2,  0,   2,  0,   9,  0,  10,  0,  11,  0),
 
 	/*
 	 * The following bank is not mentionned in the public datasheet
 	 * There is no information whether it can be used with the gpio
 	 * interrupt controller
 	 */
-	BANK("DIF",  DIF_0_P,		DIF_4_N,    -1,  -1, 5,  8,  5,  8, 12, 12, 13, 12, 14, 12),
+	BANK("DIF",	 DIF_0_P,	DIF_4_N,    -1,  -1,  5,  8,   5,  8,  12, 12,  13, 12,  14, 12),
 };
 
 static struct meson_bank meson8b_aobus_banks[] = {

drivers/pinctrl/nomadik/Kconfig

@@ -11,14 +11,6 @@ config PINCTRL_AB8500
 	bool "AB8500 pin controller driver"
 	depends on PINCTRL_ABX500 && ARCH_U8500
 
-config PINCTRL_AB8540
-	bool "AB8540 pin controller driver"
-	depends on PINCTRL_ABX500 && ARCH_U8500
-
-config PINCTRL_AB9540
-	bool "AB9540 pin controller driver"
-	depends on PINCTRL_ABX500 && ARCH_U8500
-
 config PINCTRL_AB8505
 	bool "AB8505 pin controller driver"
 	depends on PINCTRL_ABX500 && ARCH_U8500
@@ -44,8 +36,4 @@ config PINCTRL_DB8500
 	bool "DB8500 pin controller driver"
 	depends on PINCTRL_NOMADIK && ARCH_U8500
 
-config PINCTRL_DB8540
-	bool "DB8540 pin controller driver"
-	depends on PINCTRL_NOMADIK && ARCH_U8500
-
 endif

drivers/pinctrl/nomadik/Makefile

@@ -2,10 +2,7 @@
 # Nomadik family pin control drivers
 obj-$(CONFIG_PINCTRL_ABX500)	+= pinctrl-abx500.o
 obj-$(CONFIG_PINCTRL_AB8500)	+= pinctrl-ab8500.o
-obj-$(CONFIG_PINCTRL_AB8540)	+= pinctrl-ab8540.o
-obj-$(CONFIG_PINCTRL_AB9540)	+= pinctrl-ab9540.o
 obj-$(CONFIG_PINCTRL_AB8505)	+= pinctrl-ab8505.o
 obj-$(CONFIG_PINCTRL_NOMADIK)	+= pinctrl-nomadik.o
 obj-$(CONFIG_PINCTRL_STN8815)	+= pinctrl-nomadik-stn8815.o
 obj-$(CONFIG_PINCTRL_DB8500)	+= pinctrl-nomadik-db8500.o
-obj-$(CONFIG_PINCTRL_DB8540)	+= pinctrl-nomadik-db8540.o

drivers/pinctrl/nomadik/pinctrl-nomadik-stn8815.c

@@ -291,7 +291,17 @@ static const unsigned i2cusb_b_1_pins[] = { STN8815_PIN_C21, STN8815_PIN_C20 };
 static const unsigned clcd_16_23_b_1_pins[] = { STN8815_PIN_AB6,
 	STN8815_PIN_AA6, STN8815_PIN_Y6, STN8815_PIN_Y5, STN8815_PIN_AA5,
 	STN8815_PIN_AB5, STN8815_PIN_AB4, STN8815_PIN_Y4 };
-
+/* Full-speed and high-speed USB pins */
+static const unsigned usbfs_b_1_pins[] = { STN8815_PIN_E21, STN8815_PIN_E20,
+					   STN8815_PIN_C22, STN8815_PIN_D21,
+					   STN8815_PIN_D20, STN8815_PIN_C21,
+					   STN8815_PIN_C20 };
+static const unsigned usbhs_c_1_pins[] = { STN8815_PIN_E21, STN8815_PIN_E20,
+					   STN8815_PIN_C20, STN8815_PIN_C19,
+					   STN8815_PIN_C22, STN8815_PIN_D21,
+					   STN8815_PIN_D20, STN8815_PIN_C21,
+					   STN8815_PIN_C16, STN8815_PIN_A15,
+					   STN8815_PIN_D17, STN8815_PIN_C17 };
 
 #define STN8815_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins,		\
 			.npins = ARRAY_SIZE(a##_pins), .altsetting = b }
@@ -308,6 +318,8 @@ static const struct nmk_pingroup nmk_stn8815_groups[] = {
 	STN8815_PIN_GROUP(u1_b_1, NMK_GPIO_ALT_B),
 	STN8815_PIN_GROUP(i2cusb_b_1, NMK_GPIO_ALT_B),
 	STN8815_PIN_GROUP(clcd_16_23_b_1, NMK_GPIO_ALT_B),
+	STN8815_PIN_GROUP(usbfs_b_1, NMK_GPIO_ALT_B),
+	STN8815_PIN_GROUP(usbhs_c_1, NMK_GPIO_ALT_C),
 };
 
 /* We use this macro to define the groups applicable to a function */
@@ -321,6 +333,7 @@ STN8815_FUNC_GROUPS(i2c1, "i2c1_a_1");
 STN8815_FUNC_GROUPS(i2c0, "i2c0_a_1");
 STN8815_FUNC_GROUPS(i2cusb, "i2cusb_b_1");
 STN8815_FUNC_GROUPS(clcd, "clcd_16_23_b_1");
+STN8815_FUNC_GROUPS(usb, "usbfs_b_1", "usbhs_c_1");
 
 #define FUNCTION(fname)					\
 	{						\
@@ -337,6 +350,7 @@ static const struct nmk_function nmk_stn8815_functions[] = {
 	FUNCTION(i2c0),
 	FUNCTION(i2cusb),
 	FUNCTION(clcd),
+	FUNCTION(usb),
 };
 
 static const struct nmk_pinctrl_soc_data nmk_stn8815_soc = {

drivers/pinctrl/pinctrl-ocelot.c

@@ -252,7 +252,7 @@ static int ocelot_gpio_set_direction(struct pinctrl_dev *pctldev,
 	struct ocelot_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
 
 	regmap_update_bits(info->map, OCELOT_GPIO_OE, BIT(pin),
-			   input ? BIT(pin) : 0);
+			   input ? 0 : BIT(pin));
 
 	return 0;
 }
@@ -462,7 +462,7 @@ static const struct of_device_id ocelot_pinctrl_of_match[] = {
 	{},
 };
 
-int ocelot_pinctrl_probe(struct platform_device *pdev)
+static int ocelot_pinctrl_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ocelot_pinctrl *info;