提交 773ea9a8 编写于 作者: C Chris Wilson

drm/i915: Perform static RPS frequency setup before userspace

As these RPS frequency values are part of our userspace interface, they
must be established before that userspace interface is registered.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-3-git-send-email-chris@chris-wilson.co.uk
上级 3a45b05c
......@@ -5102,35 +5102,31 @@ int sanitize_rc6_option(struct drm_i915_private *dev_priv, int enable_rc6)
static void gen6_init_rps_frequencies(struct drm_i915_private *dev_priv)
{
uint32_t rp_state_cap;
u32 ddcc_status = 0;
int ret;
/* All of these values are in units of 50MHz */
dev_priv->rps.cur_freq = 0;
/* static values from HW: RP0 > RP1 > RPn (min_freq) */
if (IS_BROXTON(dev_priv)) {
rp_state_cap = I915_READ(BXT_RP_STATE_CAP);
u32 rp_state_cap = I915_READ(BXT_RP_STATE_CAP);
dev_priv->rps.rp0_freq = (rp_state_cap >> 16) & 0xff;
dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff;
dev_priv->rps.min_freq = (rp_state_cap >> 0) & 0xff;
} else {
rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
dev_priv->rps.rp0_freq = (rp_state_cap >> 0) & 0xff;
dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff;
dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff;
}
/* hw_max = RP0 until we check for overclocking */
dev_priv->rps.max_freq = dev_priv->rps.rp0_freq;
dev_priv->rps.max_freq = dev_priv->rps.rp0_freq;
dev_priv->rps.efficient_freq = dev_priv->rps.rp1_freq;
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv) ||
IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
ret = sandybridge_pcode_read(dev_priv,
HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
&ddcc_status);
if (0 == ret)
u32 ddcc_status = 0;
if (sandybridge_pcode_read(dev_priv,
HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
&ddcc_status) == 0)
dev_priv->rps.efficient_freq =
clamp_t(u8,
((ddcc_status >> 8) & 0xff),
......@@ -5140,30 +5136,14 @@ static void gen6_init_rps_frequencies(struct drm_i915_private *dev_priv)
if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
/* Store the frequency values in 16.66 MHZ units, which is
the natural hardware unit for SKL */
* the natural hardware unit for SKL
*/
dev_priv->rps.rp0_freq *= GEN9_FREQ_SCALER;
dev_priv->rps.rp1_freq *= GEN9_FREQ_SCALER;
dev_priv->rps.min_freq *= GEN9_FREQ_SCALER;
dev_priv->rps.max_freq *= GEN9_FREQ_SCALER;
dev_priv->rps.efficient_freq *= GEN9_FREQ_SCALER;
}
dev_priv->rps.idle_freq = dev_priv->rps.min_freq;
dev_priv->rps.cur_freq = dev_priv->rps.idle_freq;
/* Preserve min/max settings in case of re-init */
if (dev_priv->rps.max_freq_softlimit == 0)
dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq;
if (dev_priv->rps.min_freq_softlimit == 0) {
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
dev_priv->rps.min_freq_softlimit =
max_t(int, dev_priv->rps.efficient_freq,
intel_freq_opcode(dev_priv, 450));
else
dev_priv->rps.min_freq_softlimit =
dev_priv->rps.min_freq;
}
}
static void reset_rps(struct drm_i915_private *dev_priv,
......@@ -5183,8 +5163,6 @@ static void gen9_enable_rps(struct drm_i915_private *dev_priv)
{
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
gen6_init_rps_frequencies(dev_priv);
/* WaGsvDisableTurbo: Workaround to disable turbo on BXT A* */
if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_A1)) {
/*
......@@ -5301,9 +5279,6 @@ static void gen8_enable_rps(struct drm_i915_private *dev_priv)
/* 2a: Disable RC states. */
I915_WRITE(GEN6_RC_CONTROL, 0);
/* Initialize rps frequencies */
gen6_init_rps_frequencies(dev_priv);
/* 2b: Program RC6 thresholds.*/
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
......@@ -5392,9 +5367,6 @@ static void gen6_enable_rps(struct drm_i915_private *dev_priv)
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* Initialize rps frequencies */
gen6_init_rps_frequencies(dev_priv);
/* disable the counters and set deterministic thresholds */
I915_WRITE(GEN6_RC_CONTROL, 0);
......@@ -5778,8 +5750,6 @@ static void valleyview_init_gt_powersave(struct drm_i915_private *dev_priv)
vlv_init_gpll_ref_freq(dev_priv);
mutex_lock(&dev_priv->rps.hw_lock);
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
switch ((val >> 6) & 3) {
case 0:
......@@ -5815,18 +5785,6 @@ static void valleyview_init_gt_powersave(struct drm_i915_private *dev_priv)
DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
intel_gpu_freq(dev_priv, dev_priv->rps.min_freq),
dev_priv->rps.min_freq);
dev_priv->rps.idle_freq = dev_priv->rps.min_freq;
dev_priv->rps.cur_freq = dev_priv->rps.idle_freq;
/* Preserve min/max settings in case of re-init */
if (dev_priv->rps.max_freq_softlimit == 0)
dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq;
if (dev_priv->rps.min_freq_softlimit == 0)
dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq;
mutex_unlock(&dev_priv->rps.hw_lock);
}
static void cherryview_init_gt_powersave(struct drm_i915_private *dev_priv)
......@@ -5837,8 +5795,6 @@ static void cherryview_init_gt_powersave(struct drm_i915_private *dev_priv)
vlv_init_gpll_ref_freq(dev_priv);
mutex_lock(&dev_priv->rps.hw_lock);
mutex_lock(&dev_priv->sb_lock);
val = vlv_cck_read(dev_priv, CCK_FUSE_REG);
mutex_unlock(&dev_priv->sb_lock);
......@@ -5880,18 +5836,6 @@ static void cherryview_init_gt_powersave(struct drm_i915_private *dev_priv)
dev_priv->rps.rp1_freq |
dev_priv->rps.min_freq) & 1,
"Odd GPU freq values\n");
dev_priv->rps.idle_freq = dev_priv->rps.min_freq;
dev_priv->rps.cur_freq = dev_priv->rps.idle_freq;
/* Preserve min/max settings in case of re-init */
if (dev_priv->rps.max_freq_softlimit == 0)
dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq;
if (dev_priv->rps.min_freq_softlimit == 0)
dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq;
mutex_unlock(&dev_priv->rps.hw_lock);
}
static void valleyview_cleanup_gt_powersave(struct drm_i915_private *dev_priv)
......@@ -6559,10 +6503,30 @@ void intel_init_gt_powersave(struct drm_i915_private *dev_priv)
intel_runtime_pm_get(dev_priv);
}
mutex_lock(&dev_priv->rps.hw_lock);
/* Initialize RPS limits (for userspace) */
if (IS_CHERRYVIEW(dev_priv))
cherryview_init_gt_powersave(dev_priv);
else if (IS_VALLEYVIEW(dev_priv))
valleyview_init_gt_powersave(dev_priv);
else
gen6_init_rps_frequencies(dev_priv);
/* Derive initial user preferences/limits from the hardware limits */
dev_priv->rps.idle_freq = dev_priv->rps.min_freq;
dev_priv->rps.cur_freq = dev_priv->rps.idle_freq;
dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq;
dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq;
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
dev_priv->rps.min_freq_softlimit =
max_t(int,
dev_priv->rps.efficient_freq,
intel_freq_opcode(dev_priv, 450));
mutex_unlock(&dev_priv->rps.hw_lock);
}
void intel_cleanup_gt_powersave(struct drm_i915_private *dev_priv)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册