提交 76dc82ab 编写于 作者: S Steven Toth 提交者: Mauro Carvalho Chehab

V4L/DVB (4692): Add WinTV-HVR3000 DVB-T support

The WinTV-HVR3000 is currently defined for analog support only. This
patch adds full DVB-T support. (DVB-S support will be added soon)
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 b4bd8c66
......@@ -51,7 +51,7 @@
50 -> NPG Tech Real TV FM Top 10 [14f1:0842]
51 -> WinFast DTV2000 H [107d:665e]
52 -> Geniatech DVB-S [14f1:0084]
53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [0070:1404]
53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [0070:1404,0070:1400,0070:1401,0070:1402]
54 -> Norwood Micro TV Tuner
55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [c180:c980]
56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [0070:9600,0070:9601,0070:9602]
......@@ -1230,6 +1230,7 @@ struct cx88_board cx88_boards[] = {
.vmux = 2,
.gpio0 = 0x84bf,
}},
.mpeg = CX88_MPEG_DVB,
},
[CX88_BOARD_NORWOOD_MICRO] = {
.name = "Norwood Micro TV Tuner",
......@@ -1590,6 +1591,18 @@ struct cx88_subid cx88_subids[] = {
.subvendor = 0x0070,
.subdevice = 0x9000,
.card = CX88_BOARD_HAUPPAUGE_DVB_T1,
},{
.subvendor = 0x0070,
.subdevice = 0x1400,
.card = CX88_BOARD_HAUPPAUGE_HVR3000,
},{
.subvendor = 0x0070,
.subdevice = 0x1401,
.card = CX88_BOARD_HAUPPAUGE_HVR3000,
},{
.subvendor = 0x0070,
.subdevice = 0x1402,
.card = CX88_BOARD_HAUPPAUGE_HVR3000,
},
};
const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
......@@ -1633,7 +1646,15 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
/* Make sure we support the board model */
switch (tv.model)
{
case 14009: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in) */
case 14019: /* WinTV-HVR3000 (Retail, IR Blaster, b/panel video, 3.5mm audio in) */
case 14029: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - 880 bridge) */
case 14109: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - low profile) */
case 14129: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - 880 bridge - LP) */
case 14559: /* WinTV-HVR3000 (OEM, no IR, b/panel video, 3.5mm audio in) */
case 14569: /* WinTV-HVR3000 (OEM, no IR, no back panel video) */
case 14659: /* WinTV-HVR3000 (OEM, no IR, b/panel video, RCA audio in - Low profile) */
case 14669: /* WinTV-HVR3000 (OEM, no IR, no b/panel video - Low profile) */
case 28552: /* WinTV-PVR 'Roslyn' (No IR) */
case 34519: /* WinTV-PCI-FM */
case 90002: /* Nova-T-PCI (9002) */
......
......@@ -315,15 +315,22 @@ static struct cx22702_config hauppauge_novat_config = {
.demod_address = 0x43,
.output_mode = CX22702_SERIAL_OUTPUT,
};
static struct cx22702_config hauppauge_hvr1100_config = {
.demod_address = 0x63,
.output_mode = CX22702_SERIAL_OUTPUT,
};
static struct cx22702_config hauppauge_hvr1300_config = {
.demod_address = 0x63,
.output_mode = CX22702_SERIAL_OUTPUT,
};
static struct cx22702_config hauppauge_hvr3000_config = {
.demod_address = 0x63,
.output_mode = CX22702_SERIAL_OUTPUT,
};
static int or51132_set_ts_param(struct dvb_frontend* fe,
int is_punctured)
{
......@@ -558,6 +565,16 @@ static int dvb_register(struct cx8802_dev *dev)
&dvb_pll_fmd1216me);
}
break;
case CX88_BOARD_HAUPPAUGE_HVR3000:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr3000_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_fmd1216me);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
......
......@@ -196,6 +196,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1300:
case CX88_BOARD_HAUPPAUGE_HVR3000:
ir_codes = ir_codes_hauppauge_new;
ir_type = IR_TYPE_RC5;
ir->sampling = 1;
......@@ -419,6 +420,7 @@ void cx88_ir_irq(struct cx88_core *core)
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1300:
case CX88_BOARD_HAUPPAUGE_HVR3000:
ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
ir_dprintk("biphase decoded: %x\n", ircode);
if ((ircode & 0xfffff000) != 0x3000)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册