提交 76c3552f 编写于 作者: D Deepak S 提交者: Daniel Vetter

drm/i915/vlv: WA to fix Voltage not getting dropped to Vmin when Gfx is power gated.

When we enter RC6 and GFX Clocks are off, the voltage remains higher
than Vmin. When we try to set the freq to RPn, it might fail since the
Gfx clocks are down. So to fix this in Gfx idle, Bring the GFX clock up
and set the freq to RPn then move GFx down.

v2: remove vlv_update_rps_cur_delay function. Update commit message (Daniel)

v3: Fix the timeout during wait for gfx clock (Jesse)

v4: addressed comments on set freq and punit wait (Ville)

v5: use wait_for while waiting for GFX clk to be up. (Daniel)
    update cur_delay before requesting min_delay. (Ville)

v6: use wait_for while waiting for punit. (Ville)
Signed-off-by: NDeepak S <deepak.s@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 939fd762
......@@ -1984,6 +1984,8 @@ extern void intel_console_resume(struct work_struct *work);
void i915_queue_hangcheck(struct drm_device *dev);
void i915_handle_error(struct drm_device *dev, bool wedged);
void gen6_set_pm_mask(struct drm_i915_private *dev_priv, u32 pm_iir,
int new_delay);
extern void intel_irq_init(struct drm_device *dev);
extern void intel_hpd_init(struct drm_device *dev);
......
......@@ -986,7 +986,7 @@ static void notify_ring(struct drm_device *dev,
i915_queue_hangcheck(dev);
}
static void gen6_set_pm_mask(struct drm_i915_private *dev_priv,
void gen6_set_pm_mask(struct drm_i915_private *dev_priv,
u32 pm_iir, int new_delay)
{
if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) {
......
......@@ -4951,6 +4951,10 @@
GEN6_PM_RP_DOWN_THRESHOLD | \
GEN6_PM_RP_DOWN_TIMEOUT)
#define VLV_GTLC_SURVIVABILITY_REG 0x130098
#define VLV_GFX_CLK_STATUS_BIT (1<<3)
#define VLV_GFX_CLK_FORCE_ON_BIT (1<<2)
#define GEN6_GT_GFX_RC6_LOCKED 0x138104
#define VLV_COUNTER_CONTROL 0x138104
#define VLV_COUNT_RANGE_HIGH (1<<15)
......
......@@ -3038,6 +3038,58 @@ void gen6_set_rps(struct drm_device *dev, u8 val)
trace_intel_gpu_freq_change(val * 50);
}
/* vlv_set_rps_idle: Set the frequency to Rpn if Gfx clocks are down
*
* * If Gfx is Idle, then
* 1. Mask Turbo interrupts
* 2. Bring up Gfx clock
* 3. Change the freq to Rpn and wait till P-Unit updates freq
* 4. Clear the Force GFX CLK ON bit so that Gfx can down
* 5. Unmask Turbo interrupts
*/
static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
{
/*
* When we are idle. Drop to min voltage state.
*/
if (dev_priv->rps.cur_delay <= dev_priv->rps.min_delay)
return;
/* Mask turbo interrupt so that they will not come in between */
I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
/* Bring up the Gfx clock */
I915_WRITE(VLV_GTLC_SURVIVABILITY_REG,
I915_READ(VLV_GTLC_SURVIVABILITY_REG) |
VLV_GFX_CLK_FORCE_ON_BIT);
if (wait_for(((VLV_GFX_CLK_STATUS_BIT &
I915_READ(VLV_GTLC_SURVIVABILITY_REG)) != 0), 5)) {
DRM_ERROR("GFX_CLK_ON request timed out\n");
return;
}
dev_priv->rps.cur_delay = dev_priv->rps.min_delay;
vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ,
dev_priv->rps.min_delay);
if (wait_for(((vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS))
& GENFREQSTATUS) == 0, 5))
DRM_ERROR("timed out waiting for Punit\n");
/* Release the Gfx clock */
I915_WRITE(VLV_GTLC_SURVIVABILITY_REG,
I915_READ(VLV_GTLC_SURVIVABILITY_REG) &
~VLV_GFX_CLK_FORCE_ON_BIT);
/* Unmask Up interrupts */
dev_priv->rps.rp_up_masked = true;
gen6_set_pm_mask(dev_priv, GEN6_PM_RP_DOWN_THRESHOLD,
dev_priv->rps.min_delay);
}
void gen6_rps_idle(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
......@@ -3045,7 +3097,7 @@ void gen6_rps_idle(struct drm_i915_private *dev_priv)
mutex_lock(&dev_priv->rps.hw_lock);
if (dev_priv->rps.enabled) {
if (IS_VALLEYVIEW(dev))
valleyview_set_rps(dev_priv->dev, dev_priv->rps.min_delay);
vlv_set_rps_idle(dev_priv);
else
gen6_set_rps(dev_priv->dev, dev_priv->rps.min_delay);
dev_priv->rps.last_adj = 0;
......@@ -4276,6 +4328,7 @@ void intel_gpu_ips_teardown(void)
i915_mch_dev = NULL;
spin_unlock_irq(&mchdev_lock);
}
static void intel_init_emon(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册