be2net: cleanup wake-on-lan code

This patch cleans-up wake-on-lan code in the following ways:
1) Removes some driver hacks in be_cmd_get_acpi_wol_cap() that were based
on incorrect assumptions.
2) Uses the adapter->wol_en and wol_cap variables for checking if WoL
is supported and enabled on an interface instead of referring to the
exclusion list via the macro be_is_wol_supported()
Signed-off-by: NSuresh Reddy <suresh.reddy@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be.h

@@ -492,7 +492,7 @@ struct be_adapter {
 	u16 pvid;
 	struct phy_info phy;
 	u8 wol_cap;
-	bool wol;
+	bool wol_en;
 	u32 uc_macs;		/* Count of secondary UC MAC programmed */
 	u16 asic_rev;
 	u16 qnq_vid;

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -3040,14 +3040,16 @@ int be_cmd_get_acpi_wol_cap(struct be_adapter *adapter)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_acpi_wol_magic_config_v1 *req;
-	int status;
-	int payload_len = sizeof(*req);
+	int status = 0;
 	struct be_dma_mem cmd;
 
 	if (!be_cmd_allowed(adapter, OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG,
 			    CMD_SUBSYSTEM_ETH))
 		return -EPERM;
 
+	if (be_is_wol_excluded(adapter))
+		return status;
+
 	if (mutex_lock_interruptible(&adapter->mbox_lock))
 		return -1;
 
@@ -3072,7 +3074,7 @@ int be_cmd_get_acpi_wol_cap(struct be_adapter *adapter)
 
 	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
 			       OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG,
-			       payload_len, wrb, &cmd);
+			       sizeof(*req), wrb, &cmd);
 
 	req->hdr.version = 1;
 	req->query_options = BE_GET_WOL_CAP;
@@ -3082,13 +3084,9 @@ int be_cmd_get_acpi_wol_cap(struct be_adapter *adapter)
 		struct be_cmd_resp_acpi_wol_magic_config_v1 *resp;
 		resp = (struct be_cmd_resp_acpi_wol_magic_config_v1 *) cmd.va;
 
-		/* the command could succeed misleadingly on old f/w
-		 * which is not aware of the V1 version. fake an error. */
-		if (resp->hdr.response_length < payload_len) {
-			status = -1;
-			goto err;
-		}
 		adapter->wol_cap = resp->wol_settings;
+		if (adapter->wol_cap & BE_WOL_CAP)
+			adapter->wol_en = true;
 	}
 err:
 	mutex_unlock(&adapter->mbox_lock);

drivers/net/ethernet/emulex/benet/be_ethtool.c

@@ -713,12 +713,13 @@ be_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 
-	if (be_is_wol_supported(adapter)) {
+	if (adapter->wol_cap & BE_WOL_CAP) {
 		wol->supported |= WAKE_MAGIC;
-		if (adapter->wol)
+		if (adapter->wol_en)
 			wol->wolopts |= WAKE_MAGIC;
-	} else
+	} else {
 		wol->wolopts = 0;
+	}
 	memset(&wol->sopass, 0, sizeof(wol->sopass));
 }
 
@@ -730,15 +731,15 @@ be_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & ~WAKE_MAGIC)
 		return -EOPNOTSUPP;
 
-	if (!be_is_wol_supported(adapter)) {
+	if (!(adapter->wol_cap & BE_WOL_CAP)) {
 		dev_warn(&adapter->pdev->dev, "WOL not supported\n");
 		return -EOPNOTSUPP;
 	}
 
 	if (wol->wolopts & WAKE_MAGIC)
-		adapter->wol = true;
+		adapter->wol_en = true;
 	else
-		adapter->wol = false;
+		adapter->wol_en = false;
 
 	return 0;
 }

drivers/net/ethernet/emulex/benet/be_main.c

@@ -3408,6 +3408,8 @@ static int be_setup(struct be_adapter *adapter)
 
 	be_set_rx_mode(adapter->netdev);
 
+	be_cmd_get_acpi_wol_cap(adapter);
+
 	be_cmd_get_flow_control(adapter, &tx_fc, &rx_fc);
 
 	if (rx_fc != adapter->rx_fc || tx_fc != adapter->tx_fc)
@@ -4277,12 +4279,6 @@ static void be_remove(struct pci_dev *pdev)
 	free_netdev(adapter->netdev);
 }
 
-bool be_is_wol_supported(struct be_adapter *adapter)
-{
-	return ((adapter->wol_cap & BE_WOL_CAP) &&
-		!be_is_wol_excluded(adapter)) ? true : false;
-}
-
 static int be_get_initial_config(struct be_adapter *adapter)
 {
 	int status, level;
@@ -4291,17 +4287,6 @@ static int be_get_initial_config(struct be_adapter *adapter)
 	if (status)
 		return status;
 
-	status = be_cmd_get_acpi_wol_cap(adapter);
-	if (status) {
-		/* in case of a failure to get wol capabillities
-		 * check the exclusion list to determine WOL capability */
-		if (!be_is_wol_excluded(adapter))
-			adapter->wol_cap |= BE_WOL_CAP;
-	}
-
-	if (be_is_wol_supported(adapter))
-		adapter->wol = true;
-
 	/* Must be a power of 2 or else MODULO will BUG_ON */
 	adapter->be_get_temp_freq = 64;
 
@@ -4572,7 +4557,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct be_adapter *adapter = pci_get_drvdata(pdev);
 	struct net_device *netdev =  adapter->netdev;
 
-	if (adapter->wol)
+	if (adapter->wol_en)
 		be_setup_wol(adapter, true);
 
 	be_intr_set(adapter, false);
@@ -4628,7 +4613,7 @@ static int be_resume(struct pci_dev *pdev)
 			      msecs_to_jiffies(1000));
 	netif_device_attach(netdev);
 
-	if (adapter->wol)
+	if (adapter->wol_en)
 		be_setup_wol(adapter, false);
 
 	return 0;