提交 7612bd84 编写于 作者: D David S. Miller

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net

......@@ -155,6 +155,9 @@ struct e1000_info;
#define HV_M_STATUS_SPEED_1000 0x0200
#define HV_M_STATUS_LINK_UP 0x0040
#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */
#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000
/* Time to wait before putting the device into D3 if there's no link (in ms). */
#define LINK_TIMEOUT 100
......@@ -454,6 +457,7 @@ struct e1000_info {
#define FLAG2_DISABLE_AIM (1 << 8)
#define FLAG2_CHECK_PHY_HANG (1 << 9)
#define FLAG2_NO_DISABLE_RX (1 << 10)
#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
......
......@@ -137,8 +137,9 @@
#define HV_PM_CTRL PHY_REG(770, 17)
/* PHY Low Power Idle Control */
#define I82579_LPI_CTRL PHY_REG(772, 20)
#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
#define I82579_LPI_CTRL PHY_REG(772, 20)
#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
/* EMI Registers */
#define I82579_EMI_ADDR 0x10
......@@ -163,6 +164,11 @@
#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
#define HV_KMRN_MDIO_SLOW 0x0400
/* KMRN FIFO Control and Status */
#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16)
#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000
#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
......@@ -657,6 +663,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
bool link;
u16 phy_reg;
/*
* We only want to go out to the PHY registers to see if Auto-Neg
......@@ -689,16 +696,35 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
mac->get_link_status = false;
if (hw->phy.type == e1000_phy_82578) {
ret_val = e1000_link_stall_workaround_hv(hw);
if (ret_val)
goto out;
}
if (hw->mac.type == e1000_pch2lan) {
switch (hw->mac.type) {
case e1000_pch2lan:
ret_val = e1000_k1_workaround_lv(hw);
if (ret_val)
goto out;
/* fall-thru */
case e1000_pchlan:
if (hw->phy.type == e1000_phy_82578) {
ret_val = e1000_link_stall_workaround_hv(hw);
if (ret_val)
goto out;
}
/*
* Workaround for PCHx parts in half-duplex:
* Set the number of preambles removed from the packet
* when it is passed from the PHY to the MAC to prevent
* the MAC from misinterpreting the packet type.
*/
e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg);
phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK;
if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD)
phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT);
e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg);
break;
default:
break;
}
/*
......@@ -788,6 +814,11 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
(adapter->hw.phy.type == e1000_phy_igp_3))
adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
/* Enable workaround for 82579 w/ ME enabled */
if ((adapter->hw.mac.type == e1000_pch2lan) &&
(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
/* Disable EEE by default until IEEE802.3az spec is finalized */
if (adapter->flags2 & FLAG2_HAS_EEE)
adapter->hw.dev_spec.ich8lan.eee_disable = true;
......@@ -1355,7 +1386,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
return ret_val;
/* Preamble tuning for SSC */
ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204);
ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204);
if (ret_val)
return ret_val;
}
......@@ -1645,6 +1676,7 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
s32 ret_val = 0;
u16 status_reg = 0;
u32 mac_reg;
u16 phy_reg;
if (hw->mac.type != e1000_pch2lan)
goto out;
......@@ -1659,12 +1691,19 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
mac_reg = er32(FEXTNVM4);
mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
if (status_reg & HV_M_STATUS_SPEED_1000)
ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
if (ret_val)
goto out;
if (status_reg & HV_M_STATUS_SPEED_1000) {
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
else
phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
} else {
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
}
ew32(FEXTNVM4, mac_reg);
ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
}
out:
......
......@@ -518,6 +518,63 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
adapter->hw_csum_good++;
}
/**
* e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa()
* @hw: pointer to the HW structure
* @tail: address of tail descriptor register
* @i: value to write to tail descriptor register
*
* When updating the tail register, the ME could be accessing Host CSR
* registers at the same time. Normally, this is handled in h/w by an
* arbiter but on some parts there is a bug that acknowledges Host accesses
* later than it should which could result in the descriptor register to
* have an incorrect value. Workaround this by checking the FWSM register
* which has bit 24 set while ME is accessing Host CSR registers, wait
* if it is set and try again a number of times.
**/
static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail,
unsigned int i)
{
unsigned int j = 0;
while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) &&
(er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI))
udelay(50);
writel(i, tail);
if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail)))
return E1000_ERR_SWFW_SYNC;
return 0;
}
static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i)
{
u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail);
struct e1000_hw *hw = &adapter->hw;
if (e1000e_update_tail_wa(hw, tail, i)) {
u32 rctl = er32(RCTL);
ew32(RCTL, rctl & ~E1000_RCTL_EN);
e_err("ME firmware caused invalid RDT - resetting\n");
schedule_work(&adapter->reset_task);
}
}
static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i)
{
u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail);
struct e1000_hw *hw = &adapter->hw;
if (e1000e_update_tail_wa(hw, tail, i)) {
u32 tctl = er32(TCTL);
ew32(TCTL, tctl & ~E1000_TCTL_EN);
e_err("ME firmware caused invalid TDT - resetting\n");
schedule_work(&adapter->reset_task);
}
}
/**
* e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
* @adapter: address of board private structure
......@@ -573,7 +630,10 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
* such as IA-64).
*/
wmb();
writel(i, adapter->hw.hw_addr + rx_ring->tail);
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
e1000e_update_rdt_wa(adapter, i);
else
writel(i, adapter->hw.hw_addr + rx_ring->tail);
}
i++;
if (i == rx_ring->count)
......@@ -673,7 +733,11 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
* such as IA-64).
*/
wmb();
writel(i << 1, adapter->hw.hw_addr + rx_ring->tail);
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
e1000e_update_rdt_wa(adapter, i << 1);
else
writel(i << 1,
adapter->hw.hw_addr + rx_ring->tail);
}
i++;
......@@ -756,7 +820,10 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
* applicable for weak-ordered memory model archs,
* such as IA-64). */
wmb();
writel(i, adapter->hw.hw_addr + rx_ring->tail);
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
e1000e_update_rdt_wa(adapter, i);
else
writel(i, adapter->hw.hw_addr + rx_ring->tail);
}
}
......@@ -4689,7 +4756,12 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
wmb();
tx_ring->next_to_use = i;
writel(i, adapter->hw.hw_addr + tx_ring->tail);
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
e1000e_update_tdt_wa(adapter, i);
else
writel(i, adapter->hw.hw_addr + tx_ring->tail);
/*
* we need this if more than one processor can write to our tail
* at a time, it synchronizes IO on IA64/Altix systems
......
......@@ -1459,8 +1459,10 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb,
staterr);
if (!ddp_bytes)
if (!ddp_bytes) {
dev_kfree_skb_any(skb);
goto next_desc;
}
}
#endif /* IXGBE_FCOE */
ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册