ide: remove ->INB, ->OUTB and ->OUTBSYNC methods

* Remove no longer needed ->INB, ->OUTB and ->OUTBSYNC methods.

Then:

* Remove no longer used default_hwif_[mm]iops() and ide_[mm_]outbsync().

* Cleanup SuperIO handling in ns87415.c.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 1823649b
......@@ -469,8 +469,6 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
if (!hwif)
return -ENODEV;
default_hwif_mmiops(hwif);
state->hwif[0] = hwif;
ecard_set_drvdata(ec, state);
......@@ -547,14 +545,11 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
return -ENODEV;
hwif->chipset = ide_acorn;
default_hwif_mmiops(hwif);
idx[0] = hwif->index;
mate = ide_find_port();
if (mate) {
default_hwif_mmiops(mate);
hws[1] = &hw[1];
idx[1] = mate->index;
}
......
......@@ -399,8 +399,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
i = hwif->index;
default_hwif_mmiops(hwif);
idx[0] = i;
ide_device_add(idx, &palm_bk3710_port_info, hws);
......
......@@ -59,8 +59,6 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
goto release;
}
default_hwif_mmiops(hwif);
idx[0] = hwif->index;
ide_device_add(idx, &rapide_port_info, hws);
......
......@@ -171,8 +171,6 @@ static inline void hw_setup(hw_regs_t *hw)
static inline void hwif_setup(ide_hwif_t *hwif)
{
default_hwif_iops(hwif);
hwif->tf_load = h8300_tf_load;
hwif->tf_read = h8300_tf_read;
......
......@@ -42,18 +42,6 @@ static void ide_outb (u8 val, unsigned long port)
outb(val, port);
}
static void ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port)
{
outb(addr, port);
}
void default_hwif_iops (ide_hwif_t *hwif)
{
hwif->OUTB = ide_outb;
hwif->OUTBSYNC = ide_outbsync;
hwif->INB = ide_inb;
}
/*
* MMIO operations, typically used for SATA controllers
*/
......@@ -68,22 +56,6 @@ static void ide_mm_outb (u8 value, unsigned long port)
writeb(value, (void __iomem *) port);
}
static void ide_mm_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
{
writeb(value, (void __iomem *) port);
}
void default_hwif_mmiops (ide_hwif_t *hwif)
{
hwif->OUTB = ide_mm_outb;
/* Most systems will need to override OUTBSYNC, alas however
this one is controller specific! */
hwif->OUTBSYNC = ide_mm_outbsync;
hwif->INB = ide_mm_inb;
}
EXPORT_SYMBOL(default_hwif_mmiops);
void SELECT_DRIVE (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
......
......@@ -101,7 +101,6 @@ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
init_completion(&hwif->gendev_rel_comp);
default_hwif_iops(hwif);
default_hwif_transport(hwif);
ide_port_init_devices_data(hwif);
......
......@@ -103,10 +103,8 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start);
hw.dev = &pdev->dev;
if (mmio) {
if (mmio)
d.host_flags |= IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
}
idx[0] = hwif->index;
......
......@@ -120,9 +120,6 @@ static int __devinit swarm_ide_probe(struct device *dev)
if (hwif == NULL)
goto err;
/* Setup MMIO ops. */
default_hwif_mmiops(hwif);
idx[0] = hwif->index;
ide_device_add(idx, &swarm_port_info, hws);
......
......@@ -28,10 +28,6 @@
*/
#include <asm/superio.h>
static unsigned long superio_ide_status[2];
static unsigned long superio_ide_select[2];
static unsigned long superio_ide_dma_status[2];
#define SUPERIO_IDE_MAX_RETRIES 25
/* Because of a defect in Super I/O, all reads of the PCI DMA status
......@@ -40,27 +36,18 @@ static unsigned long superio_ide_dma_status[2];
*/
static u8 superio_ide_inb (unsigned long port)
{
if (port == superio_ide_status[0] ||
port == superio_ide_status[1] ||
port == superio_ide_select[0] ||
port == superio_ide_select[1] ||
port == superio_ide_dma_status[0] ||
port == superio_ide_dma_status[1]) {
u8 tmp;
int retries = SUPERIO_IDE_MAX_RETRIES;
/* printk(" [ reading port 0x%x with retry ] ", port); */
u8 tmp;
int retries = SUPERIO_IDE_MAX_RETRIES;
do {
tmp = inb(port);
if (tmp == 0)
udelay(50);
} while (tmp == 0 && retries-- > 0);
/* printk(" [ reading port 0x%x with retry ] ", port); */
return tmp;
}
do {
tmp = inb(port);
if (tmp == 0)
udelay(50);
} while (tmp == 0 && retries-- > 0);
return inb(port);
return tmp;
}
static u8 superio_read_status(ide_hwif_t *hwif)
......@@ -120,27 +107,20 @@ static void superio_tf_read(ide_drive_t *drive, ide_task_t *task)
static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 base, dmabase;
u32 dma_stat;
u8 port = hwif->channel, tmp;
base = pci_resource_start(pdev, port * 2) & ~3;
dmabase = pci_resource_start(pdev, 4) & ~3;
superio_ide_status[port] = base + 7;
superio_ide_select[port] = base + 6;
superio_ide_dma_status[port] = dmabase + (!port ? 2 : 0xa);
dma_stat = (pci_resource_start(pdev, 4) & ~3) + (!port ? 2 : 0xa);
/* Clear error/interrupt, enable dma */
tmp = superio_ide_inb(superio_ide_dma_status[port]);
outb(tmp | 0x66, superio_ide_dma_status[port]);
tmp = superio_ide_inb(dma_stat);
outb(tmp | 0x66, dma_stat);
hwif->read_status = superio_read_status;
hwif->read_sff_dma_status = superio_read_sff_dma_status;
hwif->tf_read = superio_tf_read;
/* We need to override inb to workaround a SuperIO errata */
hwif->INB = superio_ide_inb;
}
static void __devinit init_iops_ns87415(ide_hwif_t *hwif)
......
......@@ -188,14 +188,6 @@ static void scc_ide_outb(u8 addr, unsigned long port)
out_be32((void*)port, addr);
}
static void scc_ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port)
{
out_be32((void*)port, addr);
eieio();
in_be32((void*)(hwif->dma_base + 0x01c));
eieio();
}
static void
scc_ide_outsw(unsigned long port, void *addr, u32 count)
{
......@@ -829,10 +821,6 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
hwif->input_data = scc_input_data;
hwif->output_data = scc_output_data;
hwif->INB = scc_ide_inb;
hwif->OUTB = scc_ide_outb;
hwif->OUTBSYNC = scc_ide_outbsync;
hwif->dma_base = dma_base;
hwif->config_data = ports->ctl;
}
......
......@@ -623,9 +623,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
if (hwif == NULL)
goto err;
/* The IOC4 uses MMIO rather than Port IO. */
default_hwif_mmiops(hwif);
/* Initializing chipset IRQ Registers */
writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
......
......@@ -601,7 +601,7 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
* Fill in the basic hwif bits
*/
hwif->host_flags |= IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
hwif->hwif_data = addr;
/*
......
......@@ -486,15 +486,6 @@ pmac_ide_do_update_timings(ide_drive_t *drive)
pmac_ide_selectproc(drive);
}
static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
{
u32 tmp;
writeb(value, (void __iomem *) port);
tmp = readl((void __iomem *)(hwif->io_ports.data_addr
+ IDE_TIMING_CONFIG));
}
static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd)
{
writeb(cmd, (void __iomem *)hwif->io_ports.command_addr);
......@@ -1118,10 +1109,6 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
hwif->exec_command = pmac_exec_command;
hwif->set_irq = pmac_set_irq;
/* Setup MMIO ops */
default_hwif_mmiops(hwif);
hwif->OUTBSYNC = pmac_outbsync;
idx[0] = hwif->index;
ide_device_add(idx, &d, hws);
......
......@@ -504,11 +504,6 @@ typedef struct hwif_s {
void (*ide_dma_clear_irq)(ide_drive_t *drive);
void (*OUTB)(u8 addr, unsigned long port);
void (*OUTBSYNC)(struct hwif_s *hwif, u8 addr, unsigned long port);
u8 (*INB)(unsigned long port);
/* dma physical region descriptor table (cpu view) */
unsigned int *dmatable_cpu;
/* dma physical region descriptor table (dma view) */
......@@ -1027,8 +1022,6 @@ static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
}
#endif
extern void default_hwif_iops(ide_hwif_t *);
extern void default_hwif_mmiops(ide_hwif_t *);
extern void default_hwif_transport(ide_hwif_t *);
typedef struct ide_pci_enablebit_s {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册