提交 75f12983 编写于 作者: C Christoph Hellwig 提交者: Steve French

[CIFS] consolidate duplicate code in posix/unix inode handling

Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
上级 e086fcea
......@@ -69,6 +69,90 @@ static void cifs_set_ops(struct inode *inode)
}
}
static void cifs_unix_info_to_inode(struct inode *inode,
FILE_UNIX_BASIC_INFO *info, int force_uid_gid)
{
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
struct cifsInodeInfo *cifsInfo = CIFS_I(inode);
__u64 num_of_bytes = le64_to_cpu(info->NumOfBytes);
__u64 end_of_file = le64_to_cpu(info->EndOfFile);
inode->i_atime = cifs_NTtimeToUnix(le64_to_cpu(info->LastAccessTime));
inode->i_mtime =
cifs_NTtimeToUnix(le64_to_cpu(info->LastModificationTime));
inode->i_ctime = cifs_NTtimeToUnix(le64_to_cpu(info->LastStatusChange));
inode->i_mode = le64_to_cpu(info->Permissions);
/*
* Since we set the inode type below we need to mask off
* to avoid strange results if bits set above.
*/
inode->i_mode &= ~S_IFMT;
switch (le32_to_cpu(info->Type)) {
case UNIX_FILE:
inode->i_mode |= S_IFREG;
break;
case UNIX_SYMLINK:
inode->i_mode |= S_IFLNK;
break;
case UNIX_DIR:
inode->i_mode |= S_IFDIR;
break;
case UNIX_CHARDEV:
inode->i_mode |= S_IFCHR;
inode->i_rdev = MKDEV(le64_to_cpu(info->DevMajor),
le64_to_cpu(info->DevMinor) & MINORMASK);
break;
case UNIX_BLOCKDEV:
inode->i_mode |= S_IFBLK;
inode->i_rdev = MKDEV(le64_to_cpu(info->DevMajor),
le64_to_cpu(info->DevMinor) & MINORMASK);
break;
case UNIX_FIFO:
inode->i_mode |= S_IFIFO;
break;
case UNIX_SOCKET:
inode->i_mode |= S_IFSOCK;
break;
default:
/* safest to call it a file if we do not know */
inode->i_mode |= S_IFREG;
cFYI(1, ("unknown type %d", le32_to_cpu(info->Type)));
break;
}
if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) &&
!force_uid_gid)
inode->i_uid = cifs_sb->mnt_uid;
else
inode->i_uid = le64_to_cpu(info->Uid);
if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) &&
!force_uid_gid)
inode->i_gid = cifs_sb->mnt_gid;
else
inode->i_gid = le64_to_cpu(info->Gid);
inode->i_nlink = le64_to_cpu(info->Nlinks);
spin_lock(&inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/*
* We can not safely change the file size here if the client
* is writing to it due to potential races.
*/
i_size_write(inode, end_of_file);
/*
* i_blocks is not related to (i_size / i_blksize),
* but instead 512 byte (2**9) size is required for
* calculating num blocks.
*/
inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
}
spin_unlock(&inode->i_lock);
}
int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path, struct super_block *sb, int xid)
{
......@@ -114,7 +198,6 @@ int cifs_get_inode_info_unix(struct inode **pinode,
}
} else {
struct cifsInodeInfo *cifsInfo;
__u32 type = le32_to_cpu(findData.Type);
__u64 num_of_bytes = le64_to_cpu(findData.NumOfBytes);
__u64 end_of_file = le64_to_cpu(findData.EndOfFile);
......@@ -145,73 +228,8 @@ int cifs_get_inode_info_unix(struct inode **pinode,
/* this is ok to set on every inode revalidate */
atomic_set(&cifsInfo->inUse, 1);
inode->i_atime =
cifs_NTtimeToUnix(le64_to_cpu(findData.LastAccessTime));
inode->i_mtime =
cifs_NTtimeToUnix(le64_to_cpu
(findData.LastModificationTime));
inode->i_ctime =
cifs_NTtimeToUnix(le64_to_cpu(findData.LastStatusChange));
inode->i_mode = le64_to_cpu(findData.Permissions);
/* since we set the inode type below we need to mask off
to avoid strange results if bits set above */
inode->i_mode &= ~S_IFMT;
if (type == UNIX_FILE) {
inode->i_mode |= S_IFREG;
} else if (type == UNIX_SYMLINK) {
inode->i_mode |= S_IFLNK;
} else if (type == UNIX_DIR) {
inode->i_mode |= S_IFDIR;
} else if (type == UNIX_CHARDEV) {
inode->i_mode |= S_IFCHR;
inode->i_rdev = MKDEV(le64_to_cpu(findData.DevMajor),
le64_to_cpu(findData.DevMinor) & MINORMASK);
} else if (type == UNIX_BLOCKDEV) {
inode->i_mode |= S_IFBLK;
inode->i_rdev = MKDEV(le64_to_cpu(findData.DevMajor),
le64_to_cpu(findData.DevMinor) & MINORMASK);
} else if (type == UNIX_FIFO) {
inode->i_mode |= S_IFIFO;
} else if (type == UNIX_SOCKET) {
inode->i_mode |= S_IFSOCK;
} else {
/* safest to call it a file if we do not know */
inode->i_mode |= S_IFREG;
cFYI(1, ("unknown type %d", type));
}
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
inode->i_uid = cifs_sb->mnt_uid;
else
inode->i_uid = le64_to_cpu(findData.Uid);
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
inode->i_gid = cifs_sb->mnt_gid;
else
inode->i_gid = le64_to_cpu(findData.Gid);
inode->i_nlink = le64_to_cpu(findData.Nlinks);
spin_lock(&inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/* can not safely change the file size here if the
client is writing to it due to potential races */
i_size_write(inode, end_of_file);
/* blksize needs to be multiple of two. So safer to default to
blksize and blkbits set in superblock so 2**blkbits and blksize
will match rather than setting to:
(pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
cifs_unix_info_to_inode(inode, &findData, 0);
/* This seems incredibly stupid but it turns out that i_blocks
is not related to (i_size / i_blksize), instead 512 byte size
is required for calculating num blocks */
/* 512 bytes (2**9) is the fake blocksize that must be used */
/* for this calculation */
inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
}
spin_unlock(&inode->i_lock);
if (num_of_bytes < end_of_file)
cFYI(1, ("allocation size less than end of file"));
......@@ -774,15 +792,10 @@ int cifs_unlink(struct inode *inode, struct dentry *direntry)
static void posix_fill_in_inode(struct inode *tmp_inode,
FILE_UNIX_BASIC_INFO *pData, int *pobject_type, int isNewInode)
{
struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
loff_t local_size;
struct timespec local_mtime;
struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
struct cifs_sb_info *cifs_sb = CIFS_SB(tmp_inode->i_sb);
__u32 type = le32_to_cpu(pData->Type);
__u64 num_of_bytes = le64_to_cpu(pData->NumOfBytes);
__u64 end_of_file = le64_to_cpu(pData->EndOfFile);
cifsInfo->time = jiffies;
atomic_inc(&cifsInfo->inUse);
......@@ -790,113 +803,27 @@ static void posix_fill_in_inode(struct inode *tmp_inode,
local_mtime = tmp_inode->i_mtime;
local_size = tmp_inode->i_size;
tmp_inode->i_atime =
cifs_NTtimeToUnix(le64_to_cpu(pData->LastAccessTime));
tmp_inode->i_mtime =
cifs_NTtimeToUnix(le64_to_cpu(pData->LastModificationTime));
tmp_inode->i_ctime =
cifs_NTtimeToUnix(le64_to_cpu(pData->LastStatusChange));
tmp_inode->i_mode = le64_to_cpu(pData->Permissions);
/* since we set the inode type below we need to mask off type
to avoid strange results if bits above were corrupt */
tmp_inode->i_mode &= ~S_IFMT;
if (type == UNIX_FILE) {
*pobject_type = DT_REG;
tmp_inode->i_mode |= S_IFREG;
} else if (type == UNIX_SYMLINK) {
*pobject_type = DT_LNK;
tmp_inode->i_mode |= S_IFLNK;
} else if (type == UNIX_DIR) {
*pobject_type = DT_DIR;
tmp_inode->i_mode |= S_IFDIR;
} else if (type == UNIX_CHARDEV) {
*pobject_type = DT_CHR;
tmp_inode->i_mode |= S_IFCHR;
tmp_inode->i_rdev = MKDEV(le64_to_cpu(pData->DevMajor),
le64_to_cpu(pData->DevMinor) & MINORMASK);
} else if (type == UNIX_BLOCKDEV) {
*pobject_type = DT_BLK;
tmp_inode->i_mode |= S_IFBLK;
tmp_inode->i_rdev = MKDEV(le64_to_cpu(pData->DevMajor),
le64_to_cpu(pData->DevMinor) & MINORMASK);
} else if (type == UNIX_FIFO) {
*pobject_type = DT_FIFO;
tmp_inode->i_mode |= S_IFIFO;
} else if (type == UNIX_SOCKET) {
*pobject_type = DT_SOCK;
tmp_inode->i_mode |= S_IFSOCK;
} else {
/* safest to just call it a file */
*pobject_type = DT_REG;
tmp_inode->i_mode |= S_IFREG;
cFYI(1, ("unknown inode type %d", type));
}
cFYI(DBG2, ("object type: %d", type));
tmp_inode->i_uid = le64_to_cpu(pData->Uid);
tmp_inode->i_gid = le64_to_cpu(pData->Gid);
tmp_inode->i_nlink = le64_to_cpu(pData->Nlinks);
cifs_unix_info_to_inode(tmp_inode, pData, 1);
cifs_set_ops(tmp_inode);
spin_lock(&tmp_inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/* can not safely change the file size here if the
client is writing to it due to potential races */
i_size_write(tmp_inode, end_of_file);
/* 512 bytes (2**9) is the fake blocksize that must be used */
/* for this calculation, not the real blocksize */
tmp_inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
}
spin_unlock(&tmp_inode->i_lock);
if (S_ISREG(tmp_inode->i_mode)) {
cFYI(1, ("File inode"));
tmp_inode->i_op = &cifs_file_inode_ops;
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
tmp_inode->i_fop = &cifs_file_direct_nobrl_ops;
else
tmp_inode->i_fop = &cifs_file_direct_ops;
if (!S_ISREG(tmp_inode->i_mode))
return;
} else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
tmp_inode->i_fop = &cifs_file_nobrl_ops;
else
tmp_inode->i_fop = &cifs_file_ops;
if ((cifs_sb->tcon) && (cifs_sb->tcon->ses) &&
(cifs_sb->tcon->ses->server->maxBuf <
PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE))
tmp_inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
else
tmp_inode->i_data.a_ops = &cifs_addr_ops;
if (isNewInode)
return; /* No sense invalidating pages for new inode
since we we have not started caching
readahead file data yet */
/*
* No sense invalidating pages for new inode
* since we we have not started caching
* readahead file data yet.
*/
if (isNewInode)
return;
if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
(local_size == tmp_inode->i_size)) {
cFYI(1, ("inode exists but unchanged"));
} else {
/* file may have changed on server */
cFYI(1, ("invalidate inode, readdir detected change"));
invalidate_remote_inode(tmp_inode);
}
} else if (S_ISDIR(tmp_inode->i_mode)) {
cFYI(1, ("Directory inode"));
tmp_inode->i_op = &cifs_dir_inode_ops;
tmp_inode->i_fop = &cifs_dir_ops;
} else if (S_ISLNK(tmp_inode->i_mode)) {
cFYI(1, ("Symbolic Link inode"));
tmp_inode->i_op = &cifs_symlink_inode_ops;
/* tmp_inode->i_fop = *//* do not need to set to anything */
if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
(local_size == tmp_inode->i_size)) {
cFYI(1, ("inode exists but unchanged"));
} else {
cFYI(1, ("Special inode"));
init_special_inode(tmp_inode, tmp_inode->i_mode,
tmp_inode->i_rdev);
/* file may have changed on server */
cFYI(1, ("invalidate inode, readdir detected change"));
invalidate_remote_inode(tmp_inode);
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册