Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6870/1: The mandatory barrier rmb() must be a dsb() in for device accesses
  ARM: 6892/1: handle ptrace requests to change PC during interrupted system calls
  ARM: 6890/1: memmap: only free allocated memmap entries when using SPARSEMEM
  ARM: zImage: the page table memory must be considered before relocation
  ARM: zImage: make sure not to relocate on top of the relocation code
  ARM: zImage: Fix bad SP address after relocating kernel
  ARM: zImage: make sure the stack is 64-bit aligned
  ARM: RiscPC: acornfb: fix section mismatches
  ARM: RiscPC: etherh: fix section mismatches

arch/arm/boot/compressed/Makefile

@@ -74,7 +74,7 @@ ZTEXTADDR	:= $(CONFIG_ZBOOT_ROM_TEXT)
 ZBSSADDR	:= $(CONFIG_ZBOOT_ROM_BSS)
 else
 ZTEXTADDR	:= 0
-ZBSSADDR	:= ALIGN(4)
+ZBSSADDR	:= ALIGN(8)
 endif
 
 SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/

arch/arm/boot/compressed/head.S

@@ -179,15 +179,14 @@ not_angel:
 		bl	cache_on
 
 restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r5, r6, r9, r11, r12}
-		ldr	sp, [r0, #32]
+		ldmia	r0, {r1, r2, r3, r6, r9, r11, r12}
+		ldr	sp, [r0, #28]
 
 		/*
 		 * We might be running at a different address.  We need
 		 * to fix up various pointers.
 		 */
 		sub	r0, r0, r1		@ calculate the delta offset
-		add	r5, r5, r0		@ _start
 		add	r6, r6, r0		@ _edata
 
 #ifndef CONFIG_ZBOOT_ROM
@@ -206,31 +205,40 @@ restart:	adr	r0, LC0
 /*
  * Check to see if we will overwrite ourselves.
  *   r4  = final kernel address
- *   r5  = start of this image
  *   r9  = size of decompressed image
  *   r10 = end of this image, including  bss/stack/malloc space if non XIP
  * We basically want:
- *   r4 >= r10 -> OK
- *   r4 + image length <= r5 -> OK
+ *   r4 - 16k page directory >= r10 -> OK
+ *   r4 + image length <= current position (pc) -> OK
  */
+		add	r10, r10, #16384
 		cmp	r4, r10
 		bhs	wont_overwrite
 		add	r10, r4, r9
-		cmp	r10, r5
+   ARM(		cmp	r10, pc		)
+ THUMB(		mov	lr, pc		)
+ THUMB(		cmp	r10, lr		)
 		bls	wont_overwrite
 
 /*
  * Relocate ourselves past the end of the decompressed kernel.
- *   r5  = start of this image
  *   r6  = _edata
  *   r10 = end of the decompressed kernel
  * Because we always copy ahead, we need to do it from the end and go
  * backward in case the source and destination overlap.
  */
-		/* Round up to next 256-byte boundary. */
-		add	r10, r10, #256
+		/*
+		 * Bump to the next 256-byte boundary with the size of
+		 * the relocation code added. This avoids overwriting
+		 * ourself when the offset is small.
+		 */
+		add	r10, r10, #((reloc_code_end - restart + 256) & ~255)
 		bic	r10, r10, #255
 
+		/* Get start of code we want to copy and align it down. */
+		adr	r5, restart
+		bic	r5, r5, #31
+
 		sub	r9, r6, r5		@ size to copy
 		add	r9, r9, #31		@ rounded up to a multiple
 		bic	r9, r9, #31		@ ... of 32 bytes
@@ -245,6 +253,11 @@ restart:	adr	r0, LC0
 		/* Preserve offset to relocated code. */
 		sub	r6, r9, r6
 
+#ifndef CONFIG_ZBOOT_ROM
+		/* cache_clean_flush may use the stack, so relocate it */
+		add	sp, sp, r6
+#endif
+
 		bl	cache_clean_flush
 
 		adr	r0, BSYM(restart)
@@ -333,7 +346,6 @@ not_relocated:	mov	r0, #0
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
-		.word	_start			@ r5
 		.word	_edata			@ r6
 		.word	_image_size		@ r9
 		.word	_got_start		@ r11
@@ -1062,6 +1074,7 @@ memdump:	mov	r12, r0
 #endif
 
 		.ltorg
+reloc_code_end:
 
 		.align
 		.section ".stack", "aw", %nobits

arch/arm/boot/compressed/vmlinux.lds.in

@@ -54,6 +54,7 @@ SECTIONS
   .bss			: { *(.bss) }
   _end = .;
 
+  . = ALIGN(8);		/* the stack must be 64-bit aligned */
   .stack		: { *(.stack) }
 
   .stab 0		: { *(.stab) }

arch/arm/include/asm/system.h

@@ -159,7 +159,7 @@ extern unsigned int user_debug;
 #include <mach/barriers.h>
 #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
 #define mb()		do { dsb(); outer_sync(); } while (0)
-#define rmb()		dmb()
+#define rmb()		dsb()
 #define wmb()		mb()
 #else
 #include <asm/memory.h>

arch/arm/kernel/signal.c

@@ -597,45 +597,19 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
 	return err;
 }
 
-static inline void setup_syscall_restart(struct pt_regs *regs)
-{
-	regs->ARM_r0 = regs->ARM_ORIG_r0;
-	regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
-}
-
 /*
  * OK, we're invoking a handler
  */	
 static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset,
-	      struct pt_regs * regs, int syscall)
+	      struct pt_regs * regs)
 {
 	struct thread_info *thread = current_thread_info();
 	struct task_struct *tsk = current;
 	int usig = sig;
 	int ret;
 
-	/*
-	 * If we were from a system call, check for system call restarting...
-	 */
-	if (syscall) {
-		switch (regs->ARM_r0) {
-		case -ERESTART_RESTARTBLOCK:
-		case -ERESTARTNOHAND:
-			regs->ARM_r0 = -EINTR;
-			break;
-		case -ERESTARTSYS:
-			if (!(ka->sa.sa_flags & SA_RESTART)) {
-				regs->ARM_r0 = -EINTR;
-				break;
-			}
-			/* fallthrough */
-		case -ERESTARTNOINTR:
-			setup_syscall_restart(regs);
-		}
-	}
-
 	/*
 	 * translate the signal
 	 */
@@ -685,6 +659,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
  */
 static void do_signal(struct pt_regs *regs, int syscall)
 {
+	unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
 	struct k_sigaction ka;
 	siginfo_t info;
 	int signr;
@@ -698,18 +673,61 @@ static void do_signal(struct pt_regs *regs, int syscall)
 	if (!user_mode(regs))
 		return;
 
+	/*
+	 * If we were from a system call, check for system call restarting...
+	 */
+	if (syscall) {
+		continue_addr = regs->ARM_pc;
+		restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4);
+		retval = regs->ARM_r0;
+
+		/*
+		 * Prepare for system call restart.  We do this here so that a
+		 * debugger will see the already changed PSW.
+		 */
+		switch (retval) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			regs->ARM_r0 = regs->ARM_ORIG_r0;
+			regs->ARM_pc = restart_addr;
+			break;
+		case -ERESTART_RESTARTBLOCK:
+			regs->ARM_r0 = -EINTR;
+			break;
+		}
+	}
+
 	if (try_to_freeze())
 		goto no_signal;
 
+	/*
+	 * Get the signal to deliver.  When running under ptrace, at this
+	 * point the debugger may change all our registers ...
+	 */
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
 		sigset_t *oldset;
 
+		/*
+		 * Depending on the signal settings we may need to revert the
+		 * decision to restart the system call.  But skip this if a
+		 * debugger has chosen to restart at a different PC.
+		 */
+		if (regs->ARM_pc == restart_addr) {
+			if (retval == -ERESTARTNOHAND
+			    || (retval == -ERESTARTSYS
+				&& !(ka.sa.sa_flags & SA_RESTART))) {
+				regs->ARM_r0 = -EINTR;
+				regs->ARM_pc = continue_addr;
+			}
+		}
+
 		if (test_thread_flag(TIF_RESTORE_SIGMASK))
 			oldset = &current->saved_sigmask;
 		else
 			oldset = &current->blocked;
-		if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+		if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
 			/*
 			 * A signal was successfully delivered; the saved
 			 * sigmask will have been stored in the signal frame,
@@ -723,11 +741,14 @@ static void do_signal(struct pt_regs *regs, int syscall)
 	}
 
  no_signal:
-	/*
-	 * No signal to deliver to the process - restart the syscall.
-	 */
 	if (syscall) {
-		if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
+		/*
+		 * Handle restarting a different system call.  As above,
+		 * if a debugger has chosen to restart at a different PC,
+		 * ignore the restart.
+		 */
+		if (retval == -ERESTART_RESTARTBLOCK
+		    && regs->ARM_pc == continue_addr) {
 			if (thumb_mode(regs)) {
 				regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
 				regs->ARM_pc -= 2;
@@ -750,11 +771,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
 #endif
 			}
 		}
-		if (regs->ARM_r0 == -ERESTARTNOHAND ||
-		    regs->ARM_r0 == -ERESTARTSYS ||
-		    regs->ARM_r0 == -ERESTARTNOINTR) {
-			setup_syscall_restart(regs);
-		}
 
 		/* If there's no signal to deliver, we just put the saved sigmask
 		 * back.

arch/arm/mach-realview/include/mach/barriers.h

@@ -4,5 +4,5 @@
  * operation to deadlock the system.
  */
 #define mb()		dsb()
-#define rmb()		dmb()
+#define rmb()		dsb()
 #define wmb()		mb()

arch/arm/mach-tegra/include/mach/barriers.h

@@ -23,7 +23,7 @@
 
 #include <asm/outercache.h>
 
-#define rmb()		dmb()
+#define rmb()		dsb()
 #define wmb()		do { dsb(); outer_sync(); } while (0)
 #define mb()		wmb()
 

arch/arm/mm/init.c

@@ -392,7 +392,7 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
 	 * Convert start_pfn/end_pfn to a struct page pointer.
 	 */
 	start_pg = pfn_to_page(start_pfn - 1) + 1;
-	end_pg = pfn_to_page(end_pfn);
+	end_pg = pfn_to_page(end_pfn - 1) + 1;
 
 	/*
 	 * Convert to physical addresses, and
@@ -426,6 +426,14 @@ static void __init free_unused_memmap(struct meminfo *mi)
 
 		bank_start = bank_pfn_start(bank);
 
+#ifdef CONFIG_SPARSEMEM
+		/*
+		 * Take care not to free memmap entries that don't exist
+		 * due to SPARSEMEM sections which aren't present.
+		 */
+		bank_start = min(bank_start,
+				 ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
 		/*
 		 * If we had a previous bank, and there is a space
 		 * between the current bank and the previous, free it.
@@ -440,6 +448,12 @@ static void __init free_unused_memmap(struct meminfo *mi)
 		 */
 		prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
 	}
+
+#ifdef CONFIG_SPARSEMEM
+	if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
+		free_memmap(prev_bank_end,
+			    ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
 }
 
 static void __init free_highpages(void)

drivers/net/arm/etherh.c

@@ -527,7 +527,7 @@ static void __init etherh_banner(void)
  * Read the ethernet address string from the on board rom.
  * This is an ascii string...
  */
-static int __init etherh_addr(char *addr, struct expansion_card *ec)
+static int __devinit etherh_addr(char *addr, struct expansion_card *ec)
 {
 	struct in_chunk_dir cd;
 	char *s;
@@ -655,7 +655,7 @@ static const struct net_device_ops etherh_netdev_ops = {
 static u32 etherh_regoffsets[16];
 static u32 etherm_regoffsets[16];
 
-static int __init
+static int __devinit
 etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
 	const struct etherh_data *data = id->data;

drivers/video/acornfb.c

@@ -66,7 +66,7 @@
  * have.  Allow 1% either way on the nominal for TVs.
  */
 #define NR_MONTYPES	6
-static struct fb_monspecs monspecs[NR_MONTYPES] __initdata = {
+static struct fb_monspecs monspecs[NR_MONTYPES] __devinitdata = {
 	{	/* TV		*/
 		.hfmin	= 15469,
 		.hfmax	= 15781,
@@ -873,7 +873,7 @@ static struct fb_ops acornfb_ops = {
 /*
  * Everything after here is initialisation!!!
  */
-static struct fb_videomode modedb[] __initdata = {
+static struct fb_videomode modedb[] __devinitdata = {
 	{	/* 320x256 @ 50Hz */
 		NULL, 50,  320,  256, 125000,  92,  62,  35, 19,  38, 2,
 		FB_SYNC_COMP_HIGH_ACT,
@@ -925,8 +925,7 @@ static struct fb_videomode modedb[] __initdata = {
 	}
 };
 
-static struct fb_videomode __initdata
-acornfb_default_mode = {
+static struct fb_videomode acornfb_default_mode __devinitdata = {
 	.name =		NULL,
 	.refresh =	60,
 	.xres =		640,
@@ -942,7 +941,7 @@ acornfb_default_mode = {
 	.vmode =	FB_VMODE_NONINTERLACED
 };
 
-static void __init acornfb_init_fbinfo(void)
+static void __devinit acornfb_init_fbinfo(void)
 {
 	static int first = 1;
 
@@ -1018,8 +1017,7 @@ static void __init acornfb_init_fbinfo(void)
  *	size can optionally be followed by 'M' or 'K' for
  *	MB or KB respectively.
  */
-static void __init
-acornfb_parse_mon(char *opt)
+static void __devinit acornfb_parse_mon(char *opt)
 {
 	char *p = opt;
 
@@ -1066,8 +1064,7 @@ acornfb_parse_mon(char *opt)
 	current_par.montype = -1;
 }
 
-static void __init
-acornfb_parse_montype(char *opt)
+static void __devinit acornfb_parse_montype(char *opt)
 {
 	current_par.montype = -2;
 
@@ -1108,8 +1105,7 @@ acornfb_parse_montype(char *opt)
 	}
 }
 
-static void __init
-acornfb_parse_dram(char *opt)
+static void __devinit acornfb_parse_dram(char *opt)
 {
 	unsigned int size;
 
@@ -1134,15 +1130,14 @@ acornfb_parse_dram(char *opt)
 static struct options {
 	char *name;
 	void (*parse)(char *opt);
-} opt_table[] __initdata = {
+} opt_table[] __devinitdata = {
 	{ "mon",     acornfb_parse_mon     },
 	{ "montype", acornfb_parse_montype },
 	{ "dram",    acornfb_parse_dram    },
 	{ NULL, NULL }
 };
 
-int __init
-acornfb_setup(char *options)
+static int __devinit acornfb_setup(char *options)
 {
 	struct options *optp;
 	char *opt;
@@ -1179,8 +1174,7 @@ acornfb_setup(char *options)
  * Detect type of monitor connected
  *  For now, we just assume SVGA
  */
-static int __init
-acornfb_detect_monitortype(void)
+static int __devinit acornfb_detect_monitortype(void)
 {
 	return 4;
 }