提交 756e7104 编写于 作者: S Stephen Rothwell

powerpc: merge irq.c

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
上级 d4be4f37
......@@ -11,7 +11,7 @@ CFLAGS_btext.o += -fPIC
endif
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
signal_32.o pmc.o
irq.o signal_32.o pmc.o
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o systbl.o
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
......
......@@ -5,12 +5,12 @@
* Copyright (C) 1992 Linus Torvalds
* Adapted from arch/i386 by Gary Thomas
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Updated and modified by Cort Dougan (cort@cs.nmt.edu)
* Copyright (C) 1996 Cort Dougan
* Updated and modified by Cort Dougan <cort@fsmlabs.com>
* Copyright (C) 1996-2001 Cort Dougan
* Adapted for Power Macintosh by Paul Mackerras
* Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
* Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
......@@ -21,6 +21,14 @@
* instead of just grabbing them. Thus setups with different IRQ numbers
* shouldn't result in any weird surprises, and installing new handlers
* should be easier.
*
* The MPC8xx has an interrupt mask in the SIU. If a bit is set, the
* interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit
* mask register (of which only 16 are defined), hence the weird shifting
* and complement of the cached_irq_mask. I want to be able to stuff
* this right into the SIU SMASK register.
* Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
* to reduce code space and undefined function references.
*/
#include <linux/errno.h>
......@@ -29,6 +37,7 @@
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
......@@ -40,9 +49,13 @@
#include <linux/irq.h>
#include <linux/proc_fs.h>
#include <linux/random.h>
#include <linux/kallsyms.h>
#include <linux/seq_file.h>
#include <linux/cpumask.h>
#include <linux/profile.h>
#include <linux/bitops.h>
#ifdef CONFIG_PPC64
#include <linux/kallsyms.h>
#endif
#include <asm/uaccess.h>
#include <asm/system.h>
......@@ -52,35 +65,54 @@
#include <asm/cache.h>
#include <asm/prom.h>
#include <asm/ptrace.h>
#include <asm/iseries/it_lp_queue.h>
#include <asm/machdep.h>
#ifdef CONFIG_PPC64
#include <asm/iseries/it_lp_queue.h>
#include <asm/paca.h>
#endif
#ifdef CONFIG_SMP
extern void iSeries_smp_message_recv( struct pt_regs * );
static int ppc_spurious_interrupts;
#if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP)
extern void iSeries_smp_message_recv(struct pt_regs *);
#endif
extern irq_desc_t irq_desc[NR_IRQS];
#ifdef CONFIG_PPC32
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
atomic_t ppc_n_lost_interrupts;
#ifdef CONFIG_TAU_INT
extern int tau_initialized;
extern int tau_interrupts(int);
#endif
#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
extern atomic_t ipi_recv;
extern atomic_t ipi_sent;
#endif
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
EXPORT_SYMBOL(irq_desc);
int distribute_irqs = 1;
int __irq_offset_value;
int ppc_spurious_interrupts;
u64 ppc64_interrupt_controller;
#endif /* CONFIG_PPC64 */
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
struct irqaction * action;
int i = *(loff_t *)v, j;
struct irqaction *action;
irq_desc_t *desc;
unsigned long flags;
if (i == 0) {
seq_printf(p, " ");
for (j=0; j<NR_CPUS; j++) {
if (cpu_online(j))
seq_printf(p, "CPU%d ",j);
}
seq_puts(p, " ");
for_each_online_cpu(j)
seq_printf(p, "CPU%d ", j);
seq_putc(p, '\n');
}
......@@ -92,26 +124,41 @@ int show_interrupts(struct seq_file *p, void *v)
goto skip;
seq_printf(p, "%3d: ", i);
#ifdef CONFIG_SMP
for (j = 0; j < NR_CPUS; j++) {
if (cpu_online(j))
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
}
for_each_online_cpu(j)
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
#else
seq_printf(p, "%10u ", kstat_irqs(i));
#endif /* CONFIG_SMP */
if (desc->handler)
seq_printf(p, " %s ", desc->handler->typename );
seq_printf(p, " %s ", desc->handler->typename);
else
seq_printf(p, " None ");
seq_puts(p, " None ");
seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge ");
seq_printf(p, " %s",action->name);
for (action=action->next; action; action = action->next)
seq_printf(p, " %s", action->name);
for (action = action->next; action; action = action->next)
seq_printf(p, ", %s", action->name);
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&desc->lock, flags);
} else if (i == NR_IRQS)
} else if (i == NR_IRQS) {
#ifdef CONFIG_PPC32
#ifdef CONFIG_TAU_INT
if (tau_initialized){
seq_puts(p, "TAU: ");
for (j = 0; j < NR_CPUS; j++)
if (cpu_online(j))
seq_printf(p, "%10u ", tau_interrupts(j));
seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n");
}
#endif
#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
/* should this be per processor send/receive? */
seq_printf(p, "IPI (recv/sent): %10u/%u\n",
atomic_read(&ipi_recv), atomic_read(&ipi_sent));
#endif
#endif /* CONFIG_PPC32 */
seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
}
return 0;
}
......@@ -194,7 +241,7 @@ void do_IRQ(struct pt_regs *regs)
struct thread_info *curtp, *irqtp;
#endif
irq_enter();
irq_enter();
#ifdef CONFIG_DEBUG_STACKOVERFLOW
/* Debugging check for stack overflow: is there less than 2KB free? */
......@@ -211,6 +258,13 @@ void do_IRQ(struct pt_regs *regs)
}
#endif
/*
* Every platform is required to implement ppc_md.get_irq.
* This function will either return an irq number or -1 to
* indicate there are no more pending.
* The value -2 is for buggy hardware and means that this IRQ
* has already been handled. -- Tom
*/
irq = ppc_md.get_irq(regs);
if (irq >= 0) {
......@@ -229,15 +283,19 @@ void do_IRQ(struct pt_regs *regs)
#endif
__do_IRQ(irq, regs);
} else
/* That's not SMP safe ... but who cares ? */
ppc_spurious_interrupts++;
irq_exit();
#ifdef CONFIG_PPC32
if (irq != -2)
#endif
/* That's not SMP safe ... but who cares ? */
ppc_spurious_interrupts++;
irq_exit();
}
#endif /* CONFIG_PPC_ISERIES */
void __init init_IRQ(void)
{
#ifdef CONFIG_PPC64
static int once = 0;
if (once)
......@@ -245,10 +303,14 @@ void __init init_IRQ(void)
once++;
#endif
ppc_md.init_IRQ();
#ifdef CONFIG_PPC64
irq_ctx_init();
#endif
}
#ifdef CONFIG_PPC64
#ifndef CONFIG_PPC_ISERIES
/*
* Virtual IRQ mapping code, used on systems with XICS interrupt controllers.
......@@ -413,3 +475,4 @@ static int __init setup_noirqdistrib(char *str)
}
__setup("noirqdistrib", setup_noirqdistrib);
#endif /* CONFIG_PPC64 */
......@@ -74,6 +74,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock);
#define GATWICK_IRQ_POOL_SIZE 10
static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
/*
* Mark an irq as "lost". This is only used on the pmac
* since it can lose interrupts (see pmac_set_irq_mask).
......
......@@ -12,7 +12,7 @@ extra-$(CONFIG_6xx) += idle_6xx.o
extra-$(CONFIG_POWER4) += idle_power4.o
extra-y += vmlinux.lds
obj-y := entry.o traps.o irq.o idle.o time.o misc.o \
obj-y := entry.o traps.o idle.o time.o misc.o \
process.o align.o \
setup.o \
ppc_htab.o
......@@ -38,8 +38,7 @@ endif
# These are here while we do the architecture merge
else
obj-y := irq.o idle.o \
align.o
obj-y := idle.o align.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj-$(CONFIG_MODULES) += module.o
......
/*
* arch/ppc/kernel/irq.c
*
* Derived from arch/i386/kernel/irq.c
* Copyright (C) 1992 Linus Torvalds
* Adapted from arch/i386 by Gary Thomas
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Updated and modified by Cort Dougan <cort@fsmlabs.com>
* Copyright (C) 1996-2001 Cort Dougan
* Adapted for Power Macintosh by Paul Mackerras
* Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
* Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
*
* This file contains the code used by various IRQ handling routines:
* asking for different IRQ's should be done through these routines
* instead of just grabbing them. Thus setups with different IRQ numbers
* shouldn't result in any weird surprises, and installing new handlers
* should be easier.
*
* The MPC8xx has an interrupt mask in the SIU. If a bit is set, the
* interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit
* mask register (of which only 16 are defined), hence the weird shifting
* and complement of the cached_irq_mask. I want to be able to stuff
* this right into the SIU SMASK register.
* Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
* to reduce code space and undefined function references.
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/threads.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/proc_fs.h>
#include <linux/random.h>
#include <linux/seq_file.h>
#include <linux/cpumask.h>
#include <linux/profile.h>
#include <linux/bitops.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/cache.h>
#include <asm/prom.h>
#include <asm/ptrace.h>
#include <asm/machdep.h>
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
extern atomic_t ipi_recv;
extern atomic_t ipi_sent;
#define MAXCOUNT 10000000
int ppc_spurious_interrupts = 0;
struct irqaction *ppc_irq_action[NR_IRQS];
unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
atomic_t ppc_n_lost_interrupts;
#ifdef CONFIG_TAU_INT
extern int tau_initialized;
extern int tau_interrupts(int);
#endif
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
struct irqaction * action;
unsigned long flags;
if (i == 0) {
seq_puts(p, " ");
for (j=0; j<NR_CPUS; j++)
if (cpu_online(j))
seq_printf(p, "CPU%d ", j);
seq_putc(p, '\n');
}
if (i < NR_IRQS) {
spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if ( !action || !action->handler )
goto skip;
seq_printf(p, "%3d: ", i);
#ifdef CONFIG_SMP
for (j = 0; j < NR_CPUS; j++)
if (cpu_online(j))
seq_printf(p, "%10u ",
kstat_cpu(j).irqs[i]);
#else
seq_printf(p, "%10u ", kstat_irqs(i));
#endif /* CONFIG_SMP */
if (irq_desc[i].handler)
seq_printf(p, " %s ", irq_desc[i].handler->typename);
else
seq_puts(p, " None ");
seq_printf(p, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge ");
seq_printf(p, " %s", action->name);
for (action = action->next; action; action = action->next)
seq_printf(p, ", %s", action->name);
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS) {
#ifdef CONFIG_TAU_INT
if (tau_initialized){
seq_puts(p, "TAU: ");
for (j = 0; j < NR_CPUS; j++)
if (cpu_online(j))
seq_printf(p, "%10u ", tau_interrupts(j));
seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n");
}
#endif
#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
/* should this be per processor send/receive? */
seq_printf(p, "IPI (recv/sent): %10u/%u\n",
atomic_read(&ipi_recv), atomic_read(&ipi_sent));
#endif
seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
}
return 0;
}
void do_IRQ(struct pt_regs *regs)
{
int irq, first = 1;
irq_enter();
/*
* Every platform is required to implement ppc_md.get_irq.
* This function will either return an irq number or -1 to
* indicate there are no more pending. But the first time
* through the loop this means there wasn't and IRQ pending.
* The value -2 is for buggy hardware and means that this IRQ
* has already been handled. -- Tom
*/
while ((irq = ppc_md.get_irq(regs)) >= 0) {
__do_IRQ(irq, regs);
first = 0;
}
if (irq != -2 && first)
/* That's not SMP safe ... but who cares ? */
ppc_spurious_interrupts++;
irq_exit();
}
void __init init_IRQ(void)
{
ppc_md.init_IRQ();
}
......@@ -78,7 +78,6 @@ EXPORT_SYMBOL(program_check_exception);
EXPORT_SYMBOL(single_step_exception);
EXPORT_SYMBOL(sys_sigreturn);
EXPORT_SYMBOL(ppc_n_lost_interrupts);
EXPORT_SYMBOL(ppc_lost_interrupts);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(DMA_MODE_READ);
......
......@@ -75,6 +75,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock);
#define GATWICK_IRQ_POOL_SIZE 10
static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
/*
* Mark an irq as "lost". This is only used on the pmac
* since it can lose interrupts (see pmac_set_irq_mask).
......
......@@ -11,7 +11,7 @@ obj-y := misc.o prom.o
endif
obj-y += irq.o idle.o dma.o \
obj-y += idle.o dma.o \
align.o pacaData.o \
udbg.o ioctl32.o \
rtc.o \
......
......@@ -429,7 +429,6 @@ extern u64 ppc64_interrupt_controller;
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
/* pedantic: these are long because they are used with set_bit --RR */
extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
extern atomic_t ppc_n_lost_interrupts;
#define virt_irq_create_mapping(x) (x)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册