提交 7544b097 编写于 作者: M Michael Chan 提交者: David S. Miller

[TG3]: Add TG3_FLAG_SUPPORT_MSI flag.

And fix up the code to always allow MSI on 5714 A2.

Call tg3_find_peer() earlier because we need that information before
we can determine whether we can set TG3_FLAG_SUPPORT_MSI or not.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 98efd8a6
......@@ -7033,11 +7033,7 @@ static int tg3_open(struct net_device *dev)
if (err)
return err;
if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
(GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5750_AX) &&
(GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5750_BX) &&
!((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) &&
(tp->pdev_peer == tp->pdev))) {
if (tp->tg3_flags & TG3_FLAG_SUPPORT_MSI) {
/* All MSI supporting chips should support tagged
* status. Assert that this is the case.
*/
......@@ -10404,6 +10400,8 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp)
}
}
static struct pci_dev * __devinit tg3_find_peer(struct tg3 *);
static int __devinit tg3_get_invariants(struct tg3 *tp)
{
static struct pci_device_id write_reorder_chipsets[] = {
......@@ -10559,6 +10557,10 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
tp->pci_hdr_type = (cacheline_sz_reg >> 16) & 0xff;
tp->pci_bist = (cacheline_sz_reg >> 24) & 0xff;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714))
tp->pdev_peer = tg3_find_peer(tp);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
......@@ -10572,6 +10574,14 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
tp->tg3_flags2 |= TG3_FLG2_5705_PLUS;
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
tp->tg3_flags |= TG3_FLAG_SUPPORT_MSI;
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX ||
GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 &&
tp->pci_chip_rev_id <= CHIPREV_ID_5714_A2 &&
tp->pdev_peer == tp->pdev))
tp->tg3_flags &= ~TG3_FLAG_SUPPORT_MSI;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
......@@ -11897,10 +11907,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
tp->rx_pending = 63;
}
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714))
tp->pdev_peer = tg3_find_peer(tp);
err = tg3_get_device_address(tp);
if (err) {
printk(KERN_ERR PFX "Could not obtain valid ethernet address, "
......
......@@ -131,6 +131,7 @@
#define CHIPREV_ID_5752_A0_HW 0x5000
#define CHIPREV_ID_5752_A0 0x6000
#define CHIPREV_ID_5752_A1 0x6001
#define CHIPREV_ID_5714_A2 0x9002
#define CHIPREV_ID_5906_A1 0xc001
#define GET_ASIC_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 12)
#define ASIC_REV_5700 0x07
......@@ -2221,6 +2222,7 @@ struct tg3 {
#define TG3_FLAG_IN_RESET_TASK 0x04000000
#define TG3_FLAG_40BIT_DMA_BUG 0x08000000
#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
#define TG3_FLAG_SUPPORT_MSI 0x20000000
#define TG3_FLAG_CHIP_RESETTING 0x40000000
#define TG3_FLAG_INIT_COMPLETE 0x80000000
u32 tg3_flags2;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册