[PATCH] at91_serial -> atmel_serial: Kconfig symbols

Rename the following Kconfig symbols:
  * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL
  * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE
  * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/arm/configs/at91rm9200dk_defconfig

@@ -553,9 +553,9 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/at91rm9200ek_defconfig

@@ -534,9 +534,9 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/ateb9200_defconfig

@@ -656,9 +656,9 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/carmeva_defconfig

@@ -455,8 +455,8 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/csb337_defconfig

@@ -591,9 +591,9 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/csb637_defconfig

@@ -591,9 +591,9 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/kafa_defconfig

@@ -536,9 +536,9 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/kb9202_defconfig

@@ -418,8 +418,8 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/onearm_defconfig

@@ -583,9 +583,9 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/mach-at91rm9200/devices.c

@@ -544,7 +544,7 @@ void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
  *  UART
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_SERIAL_AT91)
+#if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
 		.start	= AT91_VA_BASE_SYS + AT91_DBGU,

arch/avr32/configs/atstk1002_defconfig

@@ -385,9 +385,9 @@ CONFIG_PPP_DEFLATE=m
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AT91=y
-CONFIG_SERIAL_AT91_CONSOLE=y
-# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

drivers/serial/Kconfig

@@ -299,17 +299,17 @@ config SERIAL_AMBA_PL011_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
-config SERIAL_AT91
-	bool "AT91RM9200 / AT91SAM9261 serial port support"
+config SERIAL_ATMEL
+	bool "AT91 / AT32 on-chip serial port support"
 	depends on ARM && (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
 	select SERIAL_CORE
 	help
 	  This enables the driver for the on-chip UARTs of the Atmel
 	  AT91RM9200 and AT91SAM926 processor.
 
-config SERIAL_AT91_CONSOLE
-	bool "Support for console on AT91RM9200 / AT91SAM9261 serial port"
-	depends on SERIAL_AT91=y
+config SERIAL_ATMEL_CONSOLE
+	bool "Support for console on AT91 / AT32 serial port"
+	depends on SERIAL_ATMEL=y
 	select SERIAL_CORE_CONSOLE
 	help
 	  Say Y here if you wish to use a UART on the Atmel AT91RM9200 or
@@ -317,9 +317,9 @@ config SERIAL_AT91_CONSOLE
 	  which receives all kernel messages and warnings and which allows
 	  logins in single user mode).
 
-config SERIAL_AT91_TTYAT
+config SERIAL_ATMEL_TTYAT
 	bool "Install as device ttyAT0-4 instead of ttyS0-4"
-	depends on SERIAL_AT91=y
+	depends on SERIAL_ATMEL=y
 	help
 	  Say Y here if you wish to have the five internal AT91RM9200 UARTs
 	  appear as /dev/ttyAT0-4 (major 204, minor 154-158) instead of the

drivers/serial/Makefile

@@ -54,5 +54,5 @@ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
 obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
 obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
-obj-$(CONFIG_SERIAL_AT91) += atmel_serial.o
+obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o

drivers/serial/atmel_serial.c

@@ -44,13 +44,13 @@
 
 #include "atmel_serial.h"
 
-#if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
 #endif
 
 #include <linux/serial_core.h>
 
-#ifdef CONFIG_SERIAL_AT91_TTYAT
+#ifdef CONFIG_SERIAL_ATMEL_TTYAT
 
 /* Use device name ttyAT, major 204 and minor 154-169.  This is necessary if we
  * should coexist with the 8250 driver, such as if we have an external 16C550
@@ -726,7 +726,7 @@ void __init at91_register_uart_fns(struct at91_port_fns *fns)
 }
 
 
-#ifdef CONFIG_SERIAL_AT91_CONSOLE
+#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
 static void at91_console_putchar(struct uart_port *port, int ch)
 {
 	while (!(UART_GET_CSR(port) & AT91_US_TXRDY))

include/asm-arm/mach/serial_at91.h

@@ -24,7 +24,7 @@ struct at91_port_fns {
 	void	(*close)(struct uart_port *);
 };
 
-#if defined(CONFIG_SERIAL_AT91)
+#if defined(CONFIG_SERIAL_ATMEL)
 void at91_register_uart_fns(struct at91_port_fns *fns);
 #else
 #define at91_register_uart_fns(fns) do { } while (0)

include/asm-avr32/mach/serial_at91.h

@@ -24,7 +24,7 @@ struct at91_port_fns {
 	void	(*close)(struct uart_port *);
 };
 
-#if defined(CONFIG_SERIAL_AT91)
+#if defined(CONFIG_SERIAL_ATMEL)
 void at91_register_uart_fns(struct at91_port_fns *fns);
 #else
 #define at91_register_uart_fns(fns) do { } while (0)