提交 744543c5 编写于 作者: H Hans de Goede 提交者: Felipe Balbi

usb: musb: sunxi: Add support for the Allwinner sunxi musb controller

This is based on initial code to get the Allwinner sunxi musb controller
supported by Chen-Yu Tsai and Roman Byshko.

This adds support for the Allwinner sunxi musb controller in both host only
and otg mode. Peripheral only mode is not supported, as no boards use that.

This has been tested on a cubietruck (A20 SoC) and an UTOO P66 tablet
(A13 SoC) with a variety of devices in host mode and with the g_serial gadget
driver in peripheral mode, plugging otg / host cables in/out a lot of times
in all possible imaginable plug orders.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
上级 4cfbd952
Allwinner sun4i A10 musb DRC/OTG controller
-------------------------------------------
Required properties:
- compatible : "allwinner,sun4i-a10-musb"
- reg : mmio address range of the musb controller
- clocks : clock specifier for the musb controller ahb gate clock
- interrupts : interrupt to which the musb controller is connected
- interrupt-names : must be "mc"
- phys : phy specifier for the otg phy
- phy-names : must be "usb"
- dr_mode : Dual-Role mode must be "host" or "otg"
- extcon : extcon specifier for the otg phy
Example:
usb_otg: usb@01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
clocks = <&ahb_gates 0>;
interrupts = <38>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
status = "disabled";
};
......@@ -5,7 +5,7 @@
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)'
depends on (USB || USB_GADGET)
help
Say Y here if your system has a dual role high speed USB
......@@ -20,6 +20,8 @@ config USB_MUSB_HDRC
Analog Devices parts using this IP include Blackfin BF54x,
BF525 and BF527.
Allwinner SoCs using this IP include A10, A13, A20, ...
If you do not know what this is, please say N.
To compile this driver as a module, choose M here; the
......@@ -60,6 +62,15 @@ endchoice
comment "Platform Glue Layer"
config USB_MUSB_SUNXI
tristate "Allwinner (sunxi)"
depends on ARCH_SUNXI
depends on NOP_USB_XCEIV
depends on PHY_SUN4I_USB
depends on EXTCON
depends on GENERIC_PHY
select SUNXI_SRAM
config USB_MUSB_DAVINCI
tristate "DaVinci"
depends on ARCH_DAVINCI_DMx
......
......@@ -20,6 +20,7 @@ obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
obj-$(CONFIG_USB_MUSB_UX500) += ux500.o
obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o
obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o
obj-$(CONFIG_USB_MUSB_AM335X_CHILD) += musb_am335x.o
......
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册